(Part 2) Best stage & sound equipment according to redditors

Jump to the top 20

We found 1,424 Reddit comments discussing the best stage & sound equipment. We ranked the 332 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Subcategories:

Stage & studio cables
Stage lighting equipment & accessories
Stage powered amplifiers
Stage monitors, speakers & subwoofers
PA systems
Stage & studio equipment bags & cases
Monitor, speaker & subwoofer parts
Microphones
Stage special effects

Top Reddit comments about Stage & Sound Equipment:

u/djscsi · 8 pointsr/SoundSystem

The Behringer iNuke series is about the cheapest power amp I recommend in the "cheap as possible but probably won't catch fire" category.

https://www.amazon.co.uk/Behringer-NU1000-Inuke-1000W-Amplifier/dp/B005EHIN12

Alternately shop used (gumtree/ebay/etc) for a used amp from a reputable brand like QSC, Crown, Crest, etc.

u/sharkamino · 7 pointsr/BudgetAudiophile

PA Speakers for a large event room.

$200:

u/niclake13 · 5 pointsr/WeAreTheMusicMakers

Good monitors are huge. Headphone sound is fine, but you want to mix using unbiased reference monitors so you know what things are going to sound like. Then you make sure it sounds good through headphones, in the car, etc. Even something like these will make a huge difference. If you've got some extra coin, go for something better. I found a pair of Mackie HR842 monitors on eBay for $250 (the old ones, not the new mk2 model). They're amazing.

You don't need more inputs than what you're actually using. If you're trying for a cheap home studio, your Apogee will work just fine. Just switch cables/inputs when you're recording something new.

But anyway. Here we go. What I would buy (of note, these are all Amazon affiliate links):

Mics:

  • Shure SM58 - $100 (for vocals)

  • Shure SM57 - $100 (for guitars/vocals)

  • Sennheiser e609 - $100 (for guitars, so you can double-mic)

  • 20' mic cable - $7.50 (2 for $15)

    Monitors:

  • M-Audio Studiophile AV 30 - $85

  • Auralex MoPAD monitor pads - $44

  • OnStage SMS6000 monitor stands - $100 (if your desk isn't large enough)

    Bass:

  • Tech 21 SansAmp Bass Driver DI - $200

    I've been out of the "assorted percussion" game for a while, so you'll have to use your best judgement for that.

    All that I've listed is $744 off of Amazon. You can DEFINITELY find cheap used mics and the Bass DI. Look for Gear Talk: Classifieds on Facebook, for example. This is all stuff that you can use today to get your home studio off the ground and functional. You also have $256 to spend on other stuff that you might need (percussion, surdo, etc.)

    Logic and Pro Tools are built from the ground up to be recording suites. Ableton, while certainly being a live-sound-first option, works just fine. Nothing wrong with getting your feet wet using Ableton, and switching over to a bigger/better suite later. I recorded my first EP using GarageBand before making the transition myself.

    Start with the basics. Start with what you NEED to record, not what you want. While what you already have is basic and not feature packed, it works and will get you in the game. (Related: stay away from plugins until you know how to really mix well with the basic compressor and EQ your recording suite comes with.)

    Hope that helps!
u/benelgermosen · 5 pointsr/StandUpComedy

You'll probably have to build yourself a stage unless you want to buy your own, but that can be pricey.


You'd want a mixer, XLRs, microphone, microphone stand, and speaker

u/burniemcburn · 5 pointsr/Beatmatch

What clubs have you been in that you've seen the trim and masters maxed out? I've swatted dj's hand away when they try to do shit like that, no way is that happening in any self respecting venue. Yes, it's less likely to clip and distort on Pioneer gear, but in no situation is it ok or expected that anyone is solidly in the reds like that. I don't let DJ's hit anything higher than just the first red LED on the master channel, and even then only tickling it. What we do have is a ton of limiting and compression to keep the volume right where we set it on a given night.

For a mobile/live setup that you're looking at, rather than a full rack of processing hardware, I'd recommend grabbing something like a Soundcraft UI12 or a Behringer XR12/Midas MR12. A small wireless mixer would be a much more cost effective and flexible setup for you right now than a huge bunch of rack hardware, in my opinion. They've got plenty of onboard routing, effects, and dynamics processing like compression and limiting, and all controllable from an iPad or your phone. The Behringer/Midas have a really nice selection of processing effect units available as sends and inserts on any channel, and the Soundcraft is really easily accessible from a user interface perspective. Pretty much everything you need to operate as a mobile DJ, and even audio for small bands is pretty doable.

u/borez · 4 pointsr/audioengineering

I buy my personal XLR's from Amazon here in the UK. However the ones I use for work are Van Damme with Neutirk connectors and are a lot more expensive. But they get a lot more use.

The thing about XLR's is that they last a whole lot longer if you learn to coil them up properly using the over-under method. Wrap them around your elbow or coil them around an object and they won't last five minutes.

u/DieselWang · 4 pointsr/battlestations

Beautiful setup! I recommend stands to get the speakers to about ear level. It'll also help with acoustic reflections off the desk - your ears will thank you. I use these: https://www.amazon.com/IsoAcoustics-1004208-ISO-L8R130-Small-Pair/dp/B00CODRTNC/

u/phcorrigan · 4 pointsr/audioengineering

I use these: https://www.amazon.com/gp/product/B0154G1AQM/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

You can buy them with different brand names for anywhere between about $40 and $100. I elected to buy them at the lower price.

u/Olnoeyes · 4 pointsr/audiophile

Looks like these. I have a pair as well and they're pretty nice.

u/salnajjar · 3 pointsr/karaoke

You're going to need a mixer, to take the audio from the microphones and the karaoke backing track and then put out the final version (also some people sing louder than others so you'll need to be able to adjust individual volumes).
This means you'll also need an amplifier, as most TV's don't have an audio in connection.
This means you'll also need speakers.

You could look at getting some decent amplified speakers, you only need one if you're doing this in a home.

Lastly, look into something like Karafun initially as the software. You can take out a 48 hour subscription for about £5 and then you have access to all their songs. Just read about no internet at farm, not even wireless data that you can tether via mobile phone?

So to recap, you need to purchase:

u/crossedx · 3 pointsr/Beatmatch

You need an amp to run between passive (non self-powered) speakers and the output source (controller). You didn't specify the speakers, but I would imagine they are passive since they have 1/4" TS connections... usually active speakers (self powered) have XLR inputs and sometimes additionally, have RCA and a mic input.

If, somehow, your speakers are active you'll just need this cord or this adapter, but I really would expect you need an amp. Having no idea what speakers you have, but knowing the next question will probably be what amp should you get, I'll just go ahead and put this here: Behringer Inuke. This is a budget amp, but it does a fairly good job. I have one running some subs and have zero complaints. If you end up needing more power, just look for the bigger versions.

u/woptimus_prime · 3 pointsr/Acoustics

This is some great insight here, I'd recommend getting those monitors off your desk and at ear level with something like this, or the foam equivalent:

https://www.amazon.ca/IsoAcoustics-ISO-L8R130-Studio-Monitor-Stands/dp/B00CODRTNC/ref=sr_1_4?keywords=Studio+Monitor+Stand+desk&qid=1564505895&s=musical-instruments&sr=1-4

u/MoogleMan3 · 3 pointsr/buildapc

In your situation, I'd get a good mixer, like this one or this one, and out of those mics, I'd skip all of them and get a good dynamic mic instead. I use the AKG D5 and love it. I used the audio technica ATR2100, shure SM57 and SM58 as well, and liked the D5 over all of them.

Edit; Actually, reading your post again, a good usb audio interface will do you well too, though you won't have as many adjustments as a mixer will give you.

u/mgithens1 · 3 pointsr/hometheater

1 - You'll want to steer away from VCR/DVD and go with at least 1080p. So bluray will be a must at this size.

2 - At that size, there isn't a projector under several thousand that will be what you're expecting. If you cut that in half (9x17), you MIGHT get a 3000 lumen projector to work. Ambient light is going to wash out the picture so bad that anything buy super bright colors will be visible.

3 - You will have to do audio. The simplest setup would be a loud portable speaker system... like this maybe ($200): https://www.amazon.com/gp/product/B00EMDNLUM/ref=ox_sc_saved_title_10?smid=ATVPDKIKX0DER&psc=1 This has a battery and enough power to handle a largish crowd.

u/homeboi808 · 3 pointsr/hometheater

Since it's directly behind the couch and not diagonally behind, you want bipole. I have the XLBP and I have them mounted on the rear wall almost directly behind my couch, and they work quite well (mine are too high, has to cover the speaker wire outlet plate).

As for stands, you are gonna want at least a 4ft tall one for either speaker; for the Fluance, these may work.

u/synthead · 3 pointsr/MusicBattlestations

There's tons of information online on how to properly set up your room for good acoustics, so I'll just tell you what to Google.

  • 38% rule
  • Equilateral triangle speaker placement
  • DIY acoustic panels
  • Overhead cloud acoustic panel
  • Bass traps
  • Damping vs diffusion
  • DIY acoustic diffuser
  • First reflection points acoustics

    And yes, you absolutely want to set up your room properly. It makes an enormous difference in clarity and stereo separation that you will absolutely benefit from, even if you consider yourself a beginner.

    And for the most part, setting it up is almost free. It just takes some preparation and basic equipment.

    Here's some examples of how acoustic treatment can help:

  • https://youtu.be/cp56A6TcL1E
  • https://youtu.be/LTAtp7CUIvs

    If you want to make some panels, here's how various insulation types compare: http://www.bobgolds.com/AbsorptionCoefficients.htm I recommend UltraTouch. It's denim, which is a lot less nasty than fiberglass, and is just about as effective, too.

    If you haven't already, I'd get some speaker stands while your mirrors are being shipped. They're not expensive. These are mine: https://www.amazon.com/gp/aw/d/B0154G1AQM/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

    There are tons of DIY panel designs out there. This is what I built: https://m.imgur.com/gallery/TG2xT

    Please let me know if you have any questions!
u/SHiZNiLTi_OG · 3 pointsr/audiophile
u/Enzo9292 · 2 pointsr/pcmasterrace

Currently don't have any speakers mate, i was considering getting a pair of 598's i think ill sell my current microphone after i buy the new one and save for a pair of 598's.

I believe the AT2020 can come bundled with one, This i believe?

Thank you for all your help. I appreciate it, ill throw you some gold on your OG comment !check

u/anote32 · 2 pointsr/hometheater

It shouldn't be that hard really. if your computer does have 5.1 out (which the card you listed seems to. come out 3.5 mm to XLR

http://www.amazon.com/Hosa-CYX-403M-Stereo-Breakout-Cable/dp/B000068OEP/ref=sr_1_2?s=electronics&ie=UTF8&qid=1459380451&sr=1-2&keywords=3.5+mm+to+xlr

that will plug into the INPUT of the amp you listed. then use

http://www.amazon.com/GLS-Audio-Cable-Patch-Cords/dp/B003JJQMD8/ref=sr_1_1?ie=UTF8&qid=1459380540&sr=8-1&keywords=25%27+XLR (2 of those)

out of the amp to the but kickers. it will require being a little handy. You would need to cut off the female end of the xlr (the end NOT plugged into the amp) and attach positive and negative leads to the butt kicker pig tails. you can leave the ground loose, or run it to a metal part of the butt kicker frame..could help if you have a hum.

you shouldn't need a DI box as your PC already puts out line level. Those are really only needed for bringing mic level signals up to line level. (generally...not always..there are exceptions)

I would run the amp in stereo using each channel to run 1 butt kicker. If you wanted to run it in bridged mono (more power but be careful) you would have to use only 1 xlr cable, cut the female end off and attache both butt kickers to that one cable from the amp in parallel. thought it really wouldn't gain you anything. and keeping it stereo will give you independent volume control over each...should someone require more butt kicking than their movie watching counter part.

The cables I listed are just example, make sure you order the appropriate lengths. you can also go more or less expensive, but went kind of middle of the road but leaned towards budget friendly.

There is probably someone with more experience than I who can contribute more. I like the challenge of incorporating PA gear into a home theater setup.

Let me know how it works!

Edit: grammar is hard...

u/TheGrimGayDaddy · 2 pointsr/podcasting

Hummm this is my shopping list for the cheapest usable equipment I could find, the interface is for 8 people so don’t get that lol and the prices are for 4 people but this is about the best I can think of (they’re might be cheaper stands and getting a shorter xlr cable might be a good idea but this is kinda a baseline)

4 Microphones $80https://www.amazon.com/Behringer-Ultravoice-Dynamic-Microphone-Cardioid/dp/B0002KZAKS/ref=pd_aw_sim_267_1/134-4918017-9581726?_encoding=UTF8&pd_rd_i=B0002KZAKS&pd_rd_r=67247d59-873d-11e9-b9fc-e96a8f51671e&pd_rd_w=rl713&pd_rd_wg=YUNRU&pf_rd_p=469620d9-3e90-496d-9dc8-b19f900ba5fe&pf_rd_r=43C56ST8VNKF3SY65G3P&psc=1&refRID=43C56ST8VNKF3SY65G3P

4 Pop filters $40https://www.amazon.com/Professional-Microphone-Stabilizing-Recordings-Broadcasting/dp/B01N21H9WY/ref=mp_s_a_1_4?keywords=pop%2Bfilter&qid=1559702707&s=gateway&sr=8-4&th=1&psc=1

4 XLR cables $40 https://www.amazon.com/gp/aw/d/B003JJQMD8/ref=psdcmw_11973421_t2_B00018CXV0

5 Microphone stands $60
https://www.amazon.com/InnoGear-Upgraded-Adjustable-Microphone-Snowball/dp/B07F82BPLV/ref=mp_s_a_1_20?keywords=microphone+stand&qid=1559703326&s=gateway&sprefix=microphone+st&sr=8-20

Audio interface $150
Amazon.com: BEHRINGER Audio Interface, 4-Channel (UMC404HD): Gateway

Total: $370

u/Embla · 2 pointsr/BuyItForLife

>Gold plating on wires is of dubious quality. It is only useful if both the connector on the gear and the wire is of the same material. If you have a gold plated connector on your cable and your equipment’s connector is a different metal it will cause galvanic corrosion. This kills the equipment.

Correct. I said elsewhere that I was full of shit, I didn't know what I was talking about with this. I'm not sure why I said the stupid things I did about gold plating.

>I will concede that Monster Cables have a great warranty. But there might be a better way. Take [2] this cable and [3] this cable. If you bought the monster cable and it broke, you could go back to the store and get a new one. (Provided that the store is still in business.) You could also buy 3 of the cheaper cables, have two backup wires, and still have half your money.

>Wires on stage are another matter as you mentioned, they are also made differently. Music production usually uses [4] XLR cables which has a balanced line construction. This makes any stray interference in the wire [5] common mode and much easier to deal with.

Yeah, you're right about this, but for XLR, Monster's prices are much more in line with an average priced cable.

I'm not saying that monster isn't a rip off for home audio/video, but for professional equipment, the extra price could be worth it after a single break.

u/nawitus · 2 pointsr/audiophile

Yep. There's a few cheap high wattage amps for home audio too.

u/LeZebre · 2 pointsr/diyaudio

Always wondered about that, thank you! I was checking out a pair of these earlier. Any tips or a rule of thumb about the distance between the speakers?

u/fcisler · 2 pointsr/audioengineering

I can think of three alternatives:

  1. Small Mackie/Yamaha mixer. Something such as this already has two unbalanced inputs (tape) or two balanced inputs (line)

  2. A pre-made device. Such as this or this

  3. If remote power is a problem something like this could work, and this happens to be one of my favorite handy "adapters"

    The only possible downside I see with your idea is attenuation. You may not get a "hot" enough signal at the far end. A couple solutions I provided are powered and have some sort of trim/gain controls, so you might be better off with them. As far as the "no boxes on the ground", i'm not sure what you are getting at. Compact? Tamper proof? Weather resistant? What is the purpose there? It could be as simple as a outdoor electrical box and stuff whatever you need inside of it.


    I think if you were to better expand on what you were trying to accomplish I could provide some better answers.
u/zdelusion · 2 pointsr/Bass

I have one of these mixers that I use for blending all my shit together also lets me play through headphones if I want.

u/youraverageinsanity1 · 2 pointsr/audio

You're unlikely to find a mixer that has those inputs built in. Your best bet would be to use adapters for all those sources and just plug those in on the 1/4in jacks. Keeping in mind though that you should also look for mixers that support panning individual channels; each jack on a mixer typically just supports mono audio, so you'd have to send it back to left / right.

For example, I use a Mackie 402 on my desk. If I want to plug in a stereo line on channels 1 and 2, that "STEREO PAN" button has to be enabled to keep it from mono'ing them both.

Off the top of my head, something like the X Air series supports linking two channels and simultaneously controlling them + L/R panning them, for multiple channels, which you would probably need with your amount of inputs. A quick look and the Mackie ProFX12 would also probably suit your needs. Both of these are probably a little overkill for exactly what you need, but generally they both have the ability to properly handle your sources once they're in 1/4in form.

I'm kind of going on at length on this because I 100% did not consider it as a problem to be aware of when buying my mixer for my purposes and just lucked out that everything works.

For those adapters, a bluetooth receiver and appropriate cables for that particular unit, optical converter, and if "A/V audio" means RCA, just slap that RCA-1/4 from earlier in as well.

u/curebdc · 2 pointsr/synthesizers

I was interested in this too, I found some awesome Behringer portable amp/PA's, I think they even have wheel attachments, which would be nice lol. They look a little lame, but 3 inputs, simple EQ, recharchable lithium batteries all for $180, used for 130!

u/IDI0TSYNCRATIC · 2 pointsr/podcasting

I use the MG16XU, but the MG12XU is $329 and has great preamps and hard compression and EQ.

u/Megatf · 2 pointsr/Twitch

CUK Stratos Gaming PC (Intel i9-9900K with Liquid Cooling, 32GB RAM, 1TB NVMe SSD + 2TB, NVIDIA GeForce RTX 2080 Ti 11GB, 750W PSU, AC WiFi, Windows 10) Gamer Desktop Computer with 7 RGB Halo Fans https://www.amazon.com/dp/B07HRXRJZR/ref=cm_sw_r_cp_api_i_YHe5Cb2M3MEHY

Adamant Custom 16X-Core Workstation Desktop Computer PC AMD RYZEN Threadripper 1950X 3.4Ghz 32Gb DDR4 3TB HDD 250Gb SSD 750W PSU https://www.amazon.com/dp/B075KQ5DK6/ref=cm_sw_r_cp_api_i_LLe5Cb88QKHQG

Elgato Stream Deck - Live Content Creation Controller with 15 customizable LCD keys, adjustable stand, for Windows 10 and macOS 10.11 or later https://www.amazon.com/dp/B06XKNZT1P/ref=cm_sw_r_cp_api_i_GMe5CbF7SEQ7P

(I have a guide on my post history on how to wire, what cables you need and usb sound cards with amazon links)
Yamaha MG12XU 12-Input 4-Bus Mixer with Effects https://www.amazon.com/dp/B00IBIVLKQ/ref=cm_sw_r_cp_api_i_9Me5Cb83KZ5FZ

(Remake of the 3600 dollar neuman u-87 mic, what I use currently)
Warm Audio WA-87 Large-diaphragm Condenser Microphone https://www.amazon.com/dp/B01M6DIGGA/ref=cm_sw_r_cp_api_i_-Re5CbC388MGW

Elgato Game Capture HD60 S (Renewed) https://www.amazon.com/dp/B072MSJP82/ref=cm_sw_r_cp_api_i_BNe5Cb1C55PNG

Canon EOS Rebel SL2 DSLR Camera Body w/Advanced Photo & Travel Bundle - Includes: Altura Photo Backpack, SanDisk 64gb SD Card, Wrist Strap and Cleaning Kit https://www.amazon.com/dp/B0774VTNY7/ref=cm_sw_r_cp_api_i_7Qe5CbXRSDEYH

Canon EF-S 10-18mm f/4.5-5.6 IS STM Wide Angle Lens w/ Essential Photo Bundle - Includes: Altura Photo UV-CPL-ND4, Dedicated Lens Hood, Neoprene Lens Pouch, Camera Cleaning Set https://www.amazon.com/dp/B00VGWFKH4/ref=cm_sw_r_cp_api_i_ORe5Cb846HHQ0

AmazonBasics 50-Inch Lightweight Tripod with Bag https://www.amazon.com/dp/B00XI87KV8/ref=cm_sw_r_cp_api_i_RWe5CbZN4M736

AmazonBasics High-Speed Mini-HDMI to HDMI TV Adapter Cable - 6 Feet https://www.amazon.com/dp/B014I8UEGY/ref=cm_sw_r_cp_api_i_nXe5CbJPSB4C1

FIT-POWER ACK-E18 DR-E18 AC Power Adapter Charger DC Coupler Kit (Replace LP-E17 Battery) For Canon EOS Rebel T6i T6s T7i SL2 750D 760D 800D 77D 200D Kiss 8000D X8i DSLR Camera https://www.amazon.com/dp/B0746KXJ26/ref=cm_sw_r_cp_api_i_dYe5Cb8BPTNP8

Elgato Cam Link 4K — Broadcast Live, Record via DSLR, Camcorder, or Action cam, 1080p60 or 4K at 30 fps, Compact HDMI Capture Device, USB 3.0 https://www.amazon.com/dp/B07K3FN5MR/ref=cm_sw_r_cp_api_i_cWe5Cb4MVKQYN

Bi-Color LED Video Light Stand Lighting Kit 2 Pack 15.4'' Large Panel 3000K-5800K 45W 4800LM Dimmable 1-100% Brightness Soft Light for YouTube Game Video Shooting Live Stream Photography Lighting https://www.amazon.com/dp/B07KC7V9BW/ref=cm_sw_r_cp_api_i_WYe5CbE440185

You can buy most of the above items on Ebay for cheaper if youre patient to wait on the shipping. I did and significantly cut down on the costs (WA-87 for 460 instead of 599 for an open box never used, 260 for a slightly used Yamaha MG12XU, etc)

I use 3 monitors, two 60hz 24” 1080p monitors plugged into my streaming PC. Then I use a 240hz 24” 1080p monitor (I recommend Dell or Asus) on my gaming PC. I use ONE mouse and keyboard to control both my gaming pc and streaming pc through the use of freeware called, “Input Director”

What I’ve linked for you is essentially my studio level setup except with faster PC’s. The 32 thread threadripper will shred through 1080p60fps encoding at medium/slow, BUT... depending on your urge I would wait until Ryzen 3 comes out and we can build a comparable/faster PC for the same or cheaper price.

Sure you could cut the streaming PC, trick out your gaming rig with a fewer higher end options that provide minimal performance increases, then drain your in-game performance significantly streaming on the same PC.

Good luck, the streaming setup above will set you apart from most of your peers but what I linked above is just the hardware, the artistic side I chose for the backdrop of my stream ran another 250-300 bucks.

u/Yorin · 2 pointsr/audiophile

You'll need a 1/4 jack to XLR (both male). Like one of these.

Then on the backplate of the sub there should be an XLR OUTPUT. So you'll need an XLR Female to XLR male to your speakers,

u/Drigr · 2 pointsr/podcasts

Unfortunately, $300 for a 4 person set up is going to be hard to make work well since you're basically starting from scratch. That's not to say it can't be done. Unfortunately, I'm going to give recommendations based on what I know is cheaper from a reputable name and hope none of these are right out terrible.

Behringer Q1202USB 12-Channel Mixer. 4 mic inputs, USB connection, $100.

Behringer Ultravoice Xm8500 Dynamic Vocal Microphone, Cardioid 4 at $20 for $80. Alternatively, BEHRINGER ULTRAVOICE XM1800S is a pack with 3 mics for $40, with one from the last link, gets you 4 mics for $60.

Cable Matters 2-Pack Microphone Cable (Mic Cable/XLR to XLR Cable) 6 Feet 2 packs of 2 at $15 for $30.

NEEWER Adjustable Microphone Suspension Boom Scissor Arm Stand 4 at $12 for $50. Alternatively AmazonBasics Tripod Boom Microphone Stand if a desk mounted stand is not ideal or possible, 4 at $20 for $80

I'm also not sure the diameter of those mics but I recommend whichever one of these fits. On Stage MY325 Dynamic Shock Mount Microphone Clip or On Stage MY330 Wireless Shock Mount Microphone Clip both about $10, so $40 for 4.

Depending on what compromises you're willing to make, this is a pretty budget 4 person set up at $280-$330, and I'd recommend saving the last $100 or so you need for it.

u/ocinn · 2 pointsr/audiophile

Don't get that sub. Get a JBL 310s. It will make your life 30000% easier. Get a TC Electronics Level Pilot. x2 RCA to XLR converter. Dual XLR to Dual XLR cable.

TT > RCA to XLR converter > Level Pilot > XLR Cables > JBL Sub > XLR Cables > JBL Monitors.

x2: https://www.amazon.com/gp/aw/d/B000068O4G/ (turntable outs to Pilot in)
x2 (4 cables): https://www.amazon.com/gp/aw/d/B00KO8VYMG/ pilot to sub and sub to monitors.

u/ProphetZopu · 2 pointsr/Twitch

Edit: Most of this post assumes you have a "line in" available on your computer. Most desktops have this already, not sure if laptops do if that is what you game on. Also, the Mackie Mix8 would be better if you plan to use voice chat because you can use the aux send for voice chat.

What mic you need really depends on what you're doing. Some great streamers get by with just a headset mic. Some people have $600 microphones and don't sound wonderful.

If I had $200 and was just starting streaming, I would start small, and do a lot of research. Get to know the basics like the difference between dynamic mics and condenser mics. Understand what phantom power is. Learn the difference between unidirectional, omnidirectional, and cardioid microphones.

If you want to get into pro audio, which it sounds like you do, I would recommend you should opt for a small mixer, maybe something like this:

https://www.amazon.com/Mackie-Mix-Mix5-5-Channel-Mixer/dp/B00ND1K8T6/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1485752991&sr=1-4&keywords=Mackie+Compact+Mixer

I would recommend a mixer rather than an interface (such as a Scarlett Solo) because a mixer ultimately gives you more options. The Scarlett Solo is a beautiful device, I have one, but it's good for one voice optionally paired with one instrument, each on mono channels. That small Mackie mixer, which is about half the price, lets you have one voice paired with two stereo channels. Right now I'm sporting a 14-channel mixer I picked up used for $125, and it has more options than I need. Interfaces are supposed to have amazing analog-to-digital converters, meaning the sound they capture is more accurate, but I feed the "main out" from the mixer into a "line in" on my PC and I notice no appreciable difference. I am not an audiophile, though. To do that you'd need a cable like this:

https://www.amazon.com/TNP-Premium-3-5mm-Audio-Cable/dp/B01CNMSRA2/ref=sr_1_2?s=electronics&ie=UTF8&qid=1485755363&sr=1-2&keywords=6.25mm%2Bmono%2Bto%2B3.5mm%2Bstereo&th=1

Pair the mixer/interface, whichever you go with, with an XLR microphone. I'd recommend starting small. This dynamic mic sounds decent for a realllly low price:

https://www.amazon.com/Shure-SM48-LC-Dynamic-Microphone-Cardioid/dp/B0002D0HY4

It's what I currently use. It's kind of a dumbed down SM58. I started with a Sterling Audio ST55, because GiantWaffle uses that and I think his stream sounds great. It turns out my house is super noisy, so the ST55 which is a condenser mic picked up crazy amounts of noise. All the running computers in the room, the air conditioning, pets running around, people talking across the room, people stomping around upstairs, you get the idea. GiantWaffle didn't have that problem because he uses sound dampening materials in his studio, and keeps noisy stuff far away from his microphone. I tried out the SM48, and it works better for my environment, but if I had known better a couple years ago I probably would have bought this instead of the ST55:

https://www.amazon.com/AKG-PERCEPTION-Professional-Instrumental-Microphone/dp/B00167QUWI

A friend of mine has it, and it sounds amazing. It has similar sound qualities to other condenser mics, but it doesn't pick up nearly as much room noise.

I'm sure the AT2035 is great. It's a condenser mic, so it can pick up really quiet sounds, and it likely picks up a huge range of frequencies resulting in a super full-sounding voice. Just make sure if you go with this one that you streaming in a quiet room. Also, it needs phantom power, so make sure that the mixer/interface you're using can support it.

Be sure to buy an XLR cable. Some microphones don't come with one.

Pop filters are cool, but aren't strictly necessary, especially if you aren't singing.

Scissor arm mounts are nice if your desk can accommodate them. Remember you get what you pay for. A normal mic stand will work alright if you have enough room for it.

I should also mention the AT2020, Blue Yeti, and even the Blue Snowball sound great. If you simply want to plug, play, and forget with no options after that, they will suit your needs. Some headsets also have pretty good microphones on them, too. Like this one:

https://www.amazon.com/Sennheiser-PC-350-Special-2015/dp/B015ZKJIYI/ref=dp_ob_title_ce

Good luck!

u/KP_Neato_Dee · 2 pointsr/makinghiphop

The most straightforward way to do this, IMO, would be to use a "monitoring mixer". It'd be a simple hardware mixing board in-between all your audio sources and your speaker system.

So the turntable (after a preamp to take it to line-level) stereo outs go to the monitor board. The computer-out goes to the monitor board. The synth-out goes to the monitor board. You can leave them all connected, all the time, and just move the faders up and down for however loud you want to hear things.

Something like this with enough inputs to not worry would be ~$70-100 from Mackie or Monoprice. A little less from Behringer, but I'd avoid that brand in general if possible.
Here's an example of an 8-channel Mackie for $75:
https://www.amazon.com/dp/B00ND1KGEI/

I've used a basic setup idea like this (and another small mixer on input) ever since I got into making music, and it works really well. Very flexible.

u/WiretapStudios · 2 pointsr/podcasts

Mackie makes a good 8 channel mixer for $75 with phantom power. They are a long time maker of mixers and this one has a ton of input and output options as well. The Behringer Xenyx 802 is similar in functions and layout for about $60. I've used a lot of Behringer stuff with no issues in the past.

Also, f you haven't checked them out, MXR makes some great sounding condenser mics that are inexpensive. I bought one new, and found two more on Craigslist.

Edit: If you need the mixer to go into your computer, Behringer sells a DAC for $30 (or cheaper used) and the tape out from the mixer goes into that, and then the digital out from the DAC goes to the usb on the computer.

u/HoneyMustard086 · 2 pointsr/livesound

No need to go used. The XR12 is $249 brand new:

https://www.amazon.com/Behringer-XR12-12-Input-Digital-Mixer/dp/B00ZR77GGC/ref=sr_1_1?ie=UTF8&qid=1486486698&sr=8-1&keywords=behringer+xr12

It is a great little mixer. I use mine for small gigs that normally don't need more than 4 mics but I have also used it for a band that needed 8 mics and the TRS line inputs are clean enough that I was able to plug in dynamic mics with XLR>TRS cables and get plenty of gain without noise. I am impressed.

The one thing to consider though is that you must have a tablet to control it. I bought an Amazon Fire HD 8 for $89. Works great.

EDIT: I just noticed the OP is in Canada. I guess he might have to go used or refurb.

u/Space_ZomBae · 2 pointsr/podcasts

Hello Podcasters!

I have a very basic gear question, hopefully this is a suitable thread to post it:

I have a condenser mic I used previously for music recording. It has an XLR connection type, and was part of a kit (from PreSonus) with a box and software.

I'm wondering if buying something like this (see link below) will allow me to use this mic to do podcasts, Skype, gaming, etc. I'm hoping to not have to buy a new mic, and just use this as a do it all solution. I'm not sure if this would give it the "phantom power" Condensers need, or if there are any other issues I'm unaware of and would be just wasting money on the cable.

Also, is a condenser mic a good idea to use for podcasts, Skype, gaming.... or would a dynamic mic be better suited? I don't really know how the descriptions translate to real world use. If one will be more harsh or pick up more unwanted noise?

Any insight on if this simple solution would work or alternative recommendations would be greatly appreciated! Thanks all!

https://www.amazon.com/VAlinks-Microphone-Converter-Microphones-Instruments/dp/B019GYKGRC/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1509973939&sr=1-2-catcorr&keywords=XLR+to+USB+converter

u/leftybanks · 2 pointsr/vinyl

You just need these: TISINO Dual RCA to XLR Male Cable, 2 XLR to 2 RCA/Phono Plug HiFi Stereo Audio Connection Microphone Cable Wire Cord - 5 Feet / 1.5m https://www.amazon.com/dp/B077L3PG45/ref=cm_sw_r_cp_api_is48BbS7VPWKA

u/ImaginaryCheetah · 2 pointsr/BudgetAudiophile

just get a 3.5mm stereo >> XLR splitter cable.

https://www.amazon.com/Hosa-HMX-010Y-XLR3M-Stereo-Breakout/dp/B00YSAVUZ2/

done with one cable. get an equalizer app for your phone.

-

alternately, get a set of cables that are RCA >> XLR splitter

https://www.amazon.com/TISINO-Cable-Stereo-Connection-Microphone/dp/B077L3PG45/

you'll take the RCA outs from whatever source you want such as

https://www.amazon.com/PROZOR-Digital-Converter-Bluetooth-Receiver/dp/B07L72S6PG/

-

XLR is meant to be daisy chained from speaker to speaker. so you need to plug your L/R XLR cables into your sub first, then use jumper cables to feed your monitors.

https://www.amazon.com/AmazonBasics-Male-Female-Microphone-Cable/dp/B01JNLTTKS/

u/HiFiveBro · 2 pointsr/BudgetAudiophile

I really like these, I use them on my desk.

u/thorltd · 1 pointr/audiophile

I'd rather invest in speaker stand than mic stand for now http://www.amazon.com/OnStage-SMS6000-Adjustable-Studio-Monitor/dp/B000CD3QYM

u/carbonnerve · 1 pointr/musicproduction

I recommend these OSS speaker stands SMS6000.

Been using them for four years with a pair of Yamaha HS8, but I have never used isolation pads on them. You could more than likely get some auralex foam and you'll be fine.

u/KCR_ · 1 pointr/audiophile

Recently just made the mistake of ordering 5 inch speaker stands for my studio monitors, obviously my monitors were far too big.

I've searched up and down for a decent set of speaker stands for these speakers but I cannot seem to find a good pair.

Any suggestions? Preferably on a website as I do not have many local stores in the area I reside in (Closest large city is 5 hours away)

Currently looking at: https://www.amazon.ca/dp/B076X9C7H1/ref=cm_sw_r_other_apa_i_lmP3CbYTQSND8

Or https://www.amazon.ca/dp/B000CD3QYM/ref=cm_sw_r_other_apa_i_FmP3CbM69BJSK

Just looking for some suggestions or insight, just looking for something to place my speakers at approximately ear level and so they're not in the same surface as my record player, something sturdy would be nice. I considered just having the speakers on the same surface as the Ikea KALLAX with Isolation pads but most people seem to suggest against that due to vibrations.

I also have isolation pads I can place on top of the stands

u/akubar · 1 pointr/ultrawidemasterrace

They're these ones https://www.amazon.com/gp/product/B000CD3QYM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

One of them came missing a foot though so I have a janky piece of rubber stabilizing it

u/2old2care · 1 pointr/audio

Yes, a passive mixer isn't designed to drive headphones. Also, the amplifier you linked to won't do the job. You need some kind of active mixer.

Something like this would probably do the job for you.

u/Shake_Oh · 1 pointr/microphones

Going to add some more information again. If you had a budget high enough to buy another microphone, I imagine you have enough budget to splurge on a higher-model mixer in the same series. This is the model I use, but if that is a bit too much you can always go for a Xenyx 1002 they are $70, /u/flehrad has this model and likes it.

u/Deranged40 · 1 pointr/pcmasterrace

Sounds like you need a mixer.

Behringer and Mackie both make great products. Remember that most of your devices are probably stereo, which is two inputs each.

So you need to mix 6 inputs to two outputs (right and left).

Behringer 1002 is a good example of this.

Channels 1 and 2 work as two independent mono channels. So it would be more convenient for you to plug your 3 devices into inputs 3/4, 5/6, and 7/8. This would give you a single volume knob per device.

From there, just plug your headphones into the "Phones" output. You might need to get a 1/4" to 1/8" adapter. They're real cheap.

u/MarcusTheGreat7 · 1 pointr/livesound

I'm looking to get a QSC amplifier with a built-in crossover. It takes a mono RCA/XLR signal in this configuration. I will be using a phone or chromecast audio as the source. My plan is to use this connector to convert from 3.5mm stereo to XLR mono. Will this work alright? I'm still not entirely certain about balanced/unbalanced loads and I want to make sure that this is a clean stereo -> mono conversion that won't have the channels cancel each other out. Thanks!

u/hawaiims · 1 pointr/audiophile

For the JBL LSR305, I obviously know I will not need an amp since they are powered speakers, but I was wondering what the best solution would be to connect them easily to an ipod, computer etc...

I'm imagining a 3.5mm to xlr such as the one listed below, however I am not too sure since I've never had speakers with these types of inputs. Please help me out with the best cost/performance cabling option for these speakers, amazon preferred.

http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/

u/nomad5411 · 1 pointr/audioengineering

that Perception120 on Amazon is an XLR plug my camcorder only has a 3.5mm audio jack there is a conversion dongle? If so would that effect the noticeable quality?
http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/ref=sr_1_1?ie=UTF8&qid=1415654239&sr=8-1&keywords=xlr+cable+to+3.5mm Something like this? right?

u/Aezalius · 1 pointr/letsplay

There are a ton of cheap ones, so I guess quality of the cable could cause problems. If you wanted to be 100% sure you could go with an xlr to 3.5mm cable (though that would move the quality to your motherboards sound card), or a cheap mixer like a Behringer q302USB which would guarantee pretty great audio quality.

To be safe with the usb cables, i'd stay away from the sub $10 ones, or definitely go with a mixer or interface. I think the best cheap, but kind of jankey setup, you could go with in your price range is to get a cheap usb sound card and use a 3.5mm to xlr adapter with that. Just keep in mind the setup would probably be better off with a $10 increase to the budget and a proper mixer.

edit: the q302 doesn't have the ability to turn of phantom power, but the q502 is also good. I have used the $13 usb cable that's on amazon before (from neewer i think?) and it worked for my original jankey at2020 setup, so you would probably be good using that too.

As a second mic I can reccomend check out the atr2100, its great and both usb and xlr, so when your budget increases or you want to upgrade your setup you can upgrade to an xlr setup without scrapping your mic.

u/SpamMeMoarxlol · 1 pointr/serendipitous5nail

Not sure if you ever figured it out but I'm techie and i know a thing or two about audio recording and such. First thing first, what EXACTLY are you having trouble with?

Based on what i see, the issue is you need to convert the signal from the power source to the sound card with something like this adapter.

That would at least get it working, although i have no idea how it would sound because of all of the adapters. Laptops make things difficult sometimes :X

But i'd have no trouble helping you figure it out if you haven't already. Either reply here and PM if you have more issues.

u/caboose1700 · 1 pointr/audio

It was the second one. I think I understand what you're saying now.

Would something like this work to just have 1 volume knob or would I be in the same boat as before? Hosa XVM-110M Right Angle 3.5mm TRS to XLR3M 10 Ft https://www.amazon.com/dp/B000K6B2DI/ref=cm_sw_r_awd_A4QNwb330PDSW

u/nickpickles · 1 pointr/Filmmakers

That's not really going to get you much as far as usable audio goes, and leaves you nothing for a boompole/cables/etc.

I'm guessing your short films have dialogue? The on-camera (which camera are you using?) mic will not work. Sorry, it sounds like absolute shit 90% of the time. You'll want a boompole (which you can make yourself- look online).

You're going to want to buy used. I'll copy-paste a reply I wrote elsewhere:


On the cheap, will exceed your budget though:

Tascam DR-40 or DR-05. You should go for the 40. Built-in mics for ambiance (probably shouldn't use these to get dialogue unless you absolutely have to). Decent recorder, takes AA's, and can be found used for around $150. http://used.guitarcenter.com/usedgear/index.cfm has one for $150, search for "tascam dr40" and it'll pop up. Talk 'em down on the price, too.

I haven't used the DR-05 so I can't vouch for the quality of it's inputs, but at this price you won't be getting class A preamps. It is what it is, but read the reviews and find which cheap recorder is the most usable for this purpose.

Audio-Technica AT835B. It's AA battery-powered so you don't need phantom mic power on your recorder. One used will run you from $1-175 Here's one on ebay for $165 http://www.ebay.com/itm/Audio-Technica-AT835b-Shotgun-Mic-w-clip-windscreen-cable-prior-to-AT8035-/290759720787?pt=LH_DefaultDomain_0&hash=item43b2a13f53

Build a boom pole. There a lot of tutorials on the internet on how to do it for free or cheap, depending on what you have around your house.
Build or buy a shockmount for the mic. A basic shockmount starts at around $30-40.

Buy/acquire/borrow an XLR-1/8" cable. The mic output is XLR female and the input on most recorders in this price range is 1/8" (otherwise known as "headphone jack-sized"). $7-10. Here's one: http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/ref=pd_cp_e_1 (if you're booming it you'll want at least a 15' cord)

Headphones. You might have some around. Ideally I'd say borrow or use the best ones you can get. Don't use ones with "super bass" or anything. You want them as flat-sounding as possible.

And finally: do some studying on audio. Practice a lot. And don't forget to clap to sync your audio track and video track for post.

u/xXxXREMNANTXxXx · 1 pointr/techsupport

Yes, I am using this cable

u/RamuneGaming · 1 pointr/Twitch

My house is not humid at all. http://www.amazon.co.uk/Stagg-High-Quality-Microphone-Cable/dp/B002YUAK54/ref=pd_sim_267_1?ie=UTF8&dpID=41A14XWa3kL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1N2GJC1TX8HQXGT0KY9X are teh cables I am using according to the seller they are balanced.

This problem continues if just plugged directly into mixer. Any other ideas this is killing me :S

u/bluesatin · 1 pointr/letsplay

Unfortunately I'm no expert in the area.

You'd probably be better asking in something like /r/WeAreTheMusicMakers

Getting a mixer second hand is probably your best bet, but off the top of my head you'd need something like:

u/SammyDBella · 1 pointr/Filmmakers

Haha thanks for pointing out the chapstick. I guess I accidentally pasted the wrong link from a different post of mine. I meant this cable.

But aside for the connectors being slightly to big, it's not like the cheap cables give worse audio or anything similar?


I'm considering getting this recorder to pair with my xlr cable.

u/StJason · 1 pointr/WeAreTheMusicMakers

Mics:

u/passwords_suck · 1 pointr/CarAV

I'm getting this to run my jbl w15 gti in the near future. Wire your IDMAX up to 8 ohms and you should be set.

u/crappyroads · 1 pointr/il2sturmovik

So I did a little research and it's apparently a very common problem.

This amp is very pricey but a guy used it for the exact purpose and had good luck.

Too rich for my blood (saving up for VR)

edit: People are also using this one

double edit: You'd need an 110VAC to 10-20VDC converter but this is a super cheap amp that would work for a single transducer

u/davedontmind · 1 pointr/simracing

I only have experience of 1 shaker but I'd suggest starting with that to try out the experience, unless you're not worried about spending lots of money. You can always add on more shakers later.

I have a single Buttkicker Gamer 2 (there are cheaper solutions, but I love the BKG2), a 3rd-party amp (the BK amp stopped working, got replaced, stopped working again, so I gave up and bought an alternative), a separate sound card for the BK, and SimVibe, all of which mounts up.

BKG2: ~£120 (when I bought it)
Replacement amp: ~£120
Sound card: ~£20
SimVibe: ~£72

Total: around £350

If you're going all-out, I'm no expert but I imagine you'd go with 5 shakers (one for each wheel, one for the chassis), which means you'd need an amp with more channels or more amps, as well as the extra shakers.

There are certainly cheaper alternative shakers to the BKG2, but I don't know enough to recommend one. Also, the BKG2 has a nice mounting system that makes attaching it to my rig simple; other shakers will probably provide more of a mounting challenge.

u/DlCKFAC3 · 1 pointr/battlestations

Those are definitely some of the best value speakers I think you can get for a desktop system.

You definitely don't need to drill any holes for stands. You have a few options.

Auralex MoPads (If you buy the 4pk you'll get some extra inserts that will allow you to either angle them up to point them more towards your ear.)

Iso-Acoustics small desk stands. I'd recommend these even at their price. They work really well to decouple the speaker from your desk and the amount of adjustment you can do will work for any setup you use now and in the future. Read a few reviews and I think you'll justify the costs ...

Good luck.

u/dkode80 · 1 pointr/DJSetups

These are more than $50. But they seem good quality


IsoAcoustics ISO-L8R130 - Small, Pair https://www.amazon.com/dp/B00CODRTNC/ref=cm_sw_r_cp_apa_pFeLBbXHCHYWS

u/Qwiksave · 1 pointr/AskBattlestations

Ok you got me thinking. If you can follow my build, at least size wise, look to these stands IsoAcoustics ISO-L8R130 - Small, Pair https://www.amazon.com/dp/B00CODRTNC/ref=cm_sw_r_cp_apa_fgoszbTKEVBS2. While a bit pricey, they are for a pair, look like they'd fit on left and right of monitors and can provide the canting to get the sound positioned for your size when you sit. The size of the speakers will the raise the height a bit further, depending on your speaker choice. Besides, they look awesome, deaden unwanted vibration and can hide wires. I have these exact stands for my Audioengines.

u/clemllk · 1 pointr/audiophile

I have been wondering if the isoacoustics are anything special? or could i make something as good myself while being cheaper? is there anything special with the structure or is it just plain plastic?

u/LocatingSilence · 1 pointr/audiophile

One thing about stands is that it has a lot to do with reducing the effect of resonance on the speaker. So some of it depends on the design of that speaker. If you place the speaker on different "stands," like a stack of books, or a cabinet, or countertop, you may hear some differences.

I've had some pricier speaker stands, and how I feel about them goes both ways, so what I'd recommend is experimenting.

For your table/desk, this set from IsoAcoustics are a popular choice for $89:
http://www.amazon.com/IsoAcoustics-ISO-L8R130-Small-Pair/dp/B00CODRTNC/?qid=1421425123&s=musical-instruments&ref=sr_1_2&ie=UTF8&sr=1-2

u/Atrike · 1 pointr/de

Ich mach jetzt mal den üblichen "unter-1000-Euro-bekommst-bekommst-du-sowieso-nichts-gescheites"-Post. Und weißt du was? Es stimmt. War dort, habe es getan. Das Problem mit Hifi bzw. Audio allgemein ist, sobald du ein Mal etwas besseres gehört hast und du auch wirklich gehört und verstanden hast was anders und besser ist an den teureren Systemen, gibt es kein Zurück mehr. Generell gilt auch (bis auf den Design-Hifi von Teufel, B&W und Co.): "You get what you pay for." Was natürlich nicht bedeutet, dass es absolut hoffnungslos ist unter der magischen 1000€ Grenze.

Ich versuche das mal in 3 Kategorien zu unterteilen:

Pleb

2.0/2.1 Desktop Stereo Lautsprecher. Bekommst du zu einem Preis von bis zu 200 Euro hoch, kannste alles in die Tonne treten. Fürs Büro sicherlich ganz gut, aber das wars auch. Und lass ja die Finger von irgendwelchem 5.X-Scheiß! Für Heimkino vielleicht ganz nett, aber zum Musikhören der letzte Dreck.

Connoisseur

Kleine Hifi-Boxen wie z.B. die Dynaudio Emit M10. Sind zwar nicht die schicksten, aber gibt's in verschiedenen Farben und am Ende soll es ja schließlich gut klingen, oder? Das ganze betreibst du mit einem NAD 3020v2 als externe Soundkarte der dein digitales Signal aus dem PC (via USB Verbindung) in ein Analoges Signal für deine Boxen umwandelt. Außerdem hat der NAD auch noch den Vorteil, dass er via Bluetooth angesteuert werden kann. Kannst also auch Mukke hören, ohne dass dein PC an sein muss. (Gesamtpreis etwa 700€ mit etwas Geduld und Research). Natürlich gibt es auch günstigere Verstärker, dann wirst du aber meist auf den Bluetooth-Zusatz verzichten müssen.

Producer

Ein paar schöne Monitore. Nein, keine zum draufglotzen, sondern welche zum hinhören. Sogenannte Nahfeld-Monitore wie sie auch in Ton-Studios eingesetzt werden. Der Vorteil von Nahfeld-Monitoren ist, dass sie dazu gemacht sind beim Arbeiten/Produzieren/Bildschirmarbeiten direkt davorzusitzen. Perfekt also für einen Desktop PC. Mein heißer Tipp in der Preiskategorie sind die Focal Alpha 65. Die gibt es gerade spottgünstig bei Thomann und sind jeden Cent wert. Spielen die Höhen schön rund und nicht überpäsent und haben ein richtig sattes (und tiefreichendes!) Low-End. Perfekt für Elektronische Musik aller Art. Zumal die Stereobühne und Räumlichkeit der Focal ausgezeichnet ist! Das Pärchen geht normalerweise für 700€+ weg, da ist der ~500€ Deal von Thomann ein Träumchen. Betreiben tust du das ganze mit einem Audient iD4 als externe Soundkarte. Falls du streamen oder generell viel zocken solltest, kannst du an das Audient sogar dein Mirkofon via XLR anstöpseln. Dazu noch ein paar vernünftige Kabel die nicht 10€ das Stück kosten und du bist für die nächsten 5-10 Jahre erstmal versogt. Nach und nach kannst du dein Setup dann noch Upgraden von zu sowas zum Drunterlegen. Gesamtpaket mit allem drum und dran auch etwa 700€.

u/RaptorUTO · 1 pointr/pcmasterrace

For the mic?

In that case, get an MXL 770 and a Mackie 402VLZ4.

(I'm a producer if you can't tell)

u/FilthyTerrible · 1 pointr/Guitar

Well in this hypothetical, assuming my friend doesn't live in a van down by the river, couldn't we share his amp, iPhone, tablet or computer while we jam? But if you're going to jam with your friend at his house and he only has a single input on his amp, perhaps he was equally foolish and bought a Fender frontman 10G then I guess I need a 1/4" Y splitter for $5.00.

https://www.amazon.com/Hosa-YPP-118-inch-Dual-Cable/dp/B000068O56/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1480701257&sr=1-1-catcorr&keywords=1%2F4+Y+splitter

But if that's what I do, if that's how I play guitar, then there are other types of gear I'd spend money on:

https://www.amazon.ca/Behringer-MX400-Ultra-Low-Noise-4-Channel/dp/B000KGYAYQ/ref=sr_1_1?ie=UTF8&qid=1480701616&sr=8-1&keywords=4+channel+mixer

https://www.amazon.ca/Mackie-402VLZ4-4-Channel-Compact-Mixer/dp/B00EDRUQXC/ref=sr_1_2?ie=UTF8&qid=1480701709&sr=8-2&keywords=4+Channel+mixer

Any of these three purchases are for gear that I will use and reuse if I become a professional musician. The Frontman 10G, I will discard into the trash bin when I get a good practice amp or rig.

u/tcookc · 1 pointr/Twitch

there is a Makie mixer with better preamps that will run quieter, the 402VLZ4 and the larger 802VLZ4.

But I promise you that what you really want is an interface, not a mixer. this one is very popular and will allow two mics. there are more expensive ones with more inputs. Then for a mixer, use a DAW. Reaper is free and fully functional.

u/SarcasticOptimist · 1 pointr/Guitar

A basic USB mixer like this Behringer (with external power supply) should handle the monitor switching. Mackie (not USB until it's around $300) and Alesis are higher end (better featured, sounding, durable) and will cost around 3x as much. Plug the computer via USB (the mixer is now your new soundcard), and the POD through the line-ins. I recommend getting active monitors, ideally used to maximize your budget. Get cables from monoprice.

u/jesseholmz · 1 pointr/WeAreTheMusicMakers

what do you mean? how do i get the music i'm singing over to come back through the mixer without running a line back into the mixer? this is the mixer

u/regreddit · 1 pointr/mobileDJ

hurry, these just went on sale 2 days ago, I posted it here.https://www.amazon.com/Behringer-MPA40BT-BEHRINGER/dp/B00EMDNLUM/ref=sr_1_20?ie=UTF8&qid=1542663770&sr=8-20&keywords=behringer+portable+pa

I use it for all my beach and outdoor weddings up to 125 or so guests. For mic, I use this cheap rig and it has never failed me for over a year:

https://www.amazon.com/gp/product/B06XXW1GTZ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/jakekingdead · 1 pointr/OPZuser

Oh wow looks like they got rid of the line in with version 3. Boom 2 and the UE Roll have line-in.

This is the Europort I have -

BEHRINGER MPA40BT) https://www.amazon.com/dp/B00EMDNLUM/ref=cm_sw_r_cp_api_i_Fds5CbWN07GF1

u/TheShoutingSeidhr · 1 pointr/audio

I was looking at the Yamaha MG12XU. Does this work as both Mixer and Audio Interface? Having trouble finding out in my searches.

u/SuperKato1K · 1 pointr/Twitch

I use one of these:

https://www.amazon.com/Yamaha-MG12XU-12-Input-4-Bus-Effects/dp/B00IBIVLKQ/

There's also:

https://www.amazon.com/Mackie-PROFX12V2-12-Channel-Compact-Effects/dp/B00VUU7B7E/

https://www.amazon.com/Alto-Professional-Live-1202-12-Channel/dp/B00HG8WGU6/

Etc.

The biggest difference would probably be a better mic preamp in something with a bit larger $tag. You're still not getting premium preamps or plugs, but they're generally going to be better than what a basic, el-cheapo mixer offers.

u/Gamefan211 · 1 pointr/audioengineering

Sorry if this isn't the right sub for this

Reposting due to formatting issue in previous post.

So I'm currently trying to figure out how to split audio from all of my consoles.

The best setup I can think of at the moment is splitting the audio off of the second output from my HDMI splitter I use for my PS3. I could try to move the HDMI splitter after my capture card, so then I'd still hear all audio from the currently active console.
The above visualized: Current into new

My main issue is finding a cheap stereo mixer that takes single, stereo, 1/4" plugs to the Mini-mixer, as the one I recently got is exactly what I need, except that it's mono only. I've been able to find a few passive mini-mixers, this one being the most likely. The reason I can't go with that, is because it's likely the game's audio will be too quiet for me and I'd to boost it, which requires an active mixer.

Every single other alternative has been the Behringer Xenyx 502, which may work, but I'd need to buy 3.5mm/RCA to L/R 1/4" adapters, which would be an extra $20-$30 plus I want a bit more scalability for future audio inputs.

Lastly, for a bit more info, I use the VST plugins within OBS Studio, so I sadly cant just plug these into my current mixer, a Yamaha MG10XU, or else it'll come out of where my mic is, as well as likely being too loud for viewers when I boost the volume for myself.
The only alternative would be to upgrade to a Yamaha MG12XU for the extra Aux bus's, which would be an extra $130 for only the extra aux bus's I'd be using, since there's nothing else that i feel warrants the extra cost.

So in summary, has anyone found a better way to get console audio to headphones while keeping it separate from the stream audio?

u/RareBearToe · 1 pointr/audiophile

I currently have the jbl lsr 305s and I'm looking to add a subwoofer. I play solely off my iphone 6 via google chromecast audio.

What gear do I need to make the jbl lsr 310 (the subwoofer) work? Do I just need XLR cables? Here are the ones I'm looking at: http://www.amazon.com/Cable-Matters-2-Pack-Plated-Microphone/dp/B00KO8VYMG?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_act_title_2&smid=A1AMUYYA3CT6HJ

Will I need an audio interface?

Thanks in advance

u/Arve · 1 pointr/audiophile

> Would I just use 2 1/4 to XLR wires to connect the speakers to the sub, 1 for each speaker?

No. You need this type of cable. Basically "XLR Microphone cable".

u/lexormint · 1 pointr/audiophile

Okay, thanks a bunch. So for example this for the chromecast and then this for the xlrs? Also maybe a dumb question but how does the chromecast work with everything, like where do I plug it in? Wouldn't I have to plug it in to all three to get it to work for all three or is that not how it works? Again, thanks.

u/haganbmj · 1 pointr/smashbros

Here's what I use. Not nearly the best, but it's manageable for the average Joe or group.

Current

  • Streaming: OBS Studio (Win 0.14.x)
  • Overlay: HTML/Javascript w/ StreamControl writing data to JSON and JS polling it.
  • Capture Device: Startech USB3HDCAP + XRGB-mini Framemeister
  • WebCams: 2x Logitech C920
  • Audio Mixer: Mackie Mix 8
  • Headsets: 2x Audio-Technica BPHS1
  • Misc: Powered Composite Splitter, Behringer HA400 Headphone Amp
  • Stream Tools: Nightbot, TwitchAlerts

    Deprecated

  • Capture Device: Dazzle DVC 100

    BPHS1s are kind of the standard for accessible and reasonably priced xlr headsets.

    I was getting decent quality out of my old dazzle before I switched, people just need to learn how to setup their bitrate properly to reduce artifacts and how to deinterlace their capture via amarectv or using the built in obs plugins (I used yadifx4 for the longest time) which do a nice, respectable job. Would I recommend a dazzle? Eh, it produces decent video for the price (got mine on ebay for $20), but has some compatibility issues - if you do a quick search for audio issues with the dazzle you'll find a couple threads. There are workarounds, but it's finicky.

    Ideally though, streams should be capturing component video. It removes the need for software/external hardware deinterlacing. The issue here is that you either need a TV that supports component, or a component->composite converter, which I've seen people have performance issues with in the past.
    My current setup uses a Framemeister to upscale the composite signal and handle the deinterlacing, outputting HDMI to the USB3HDCAP. The advantage is that I get to feed straight composite signals to any plain old CRT, which is great because I've been recording out of a suitcase the last few months while I move around.

    I build my overlays in JavaScript and HTML; there's a layer of logic that polls a local JSON file written by StreamControl for changes and updates them on the page.

    Just taking off on a flight. More info later. (It's later)

    Sample with the Dazzle
u/caryatid23 · 1 pointr/audioengineering

Hello!

Looking for a small mixer ( or maybe something similar ) that has only pan-able channels. For example: However with 4 mono inputs w/ pan as oppossed to 2 mono pan inputs then two stereo balance inputs.

Essentially I'm wanting to route 4+ inputs to 2 outputs where the outputs are to different signal chains not traditional left/right. So channels w/o pan are useless and desk space is at a premium.

Thanks!

u/xxmatkingxx · 1 pointr/podcasts

OK this all makes sense. One concern I have is that right now everyone is using mod mics because it's equipment we already had. The sound is pretty good so I'm happy with them for now. If I grab this Mackie Mix Series Mix8 do I have more spending to do or is this good? Is there cheaper options?

u/tangentandhyperbole · 1 pointr/synthesizers

Behringer has a reputation, like em or not.

Sounds like you don't want to break the bank either, so Mackie is great. Just depends how much you want to spend.

8 channel for $72 Basic but does the job for the price.

12 channel with effects and usb

16 channel w/effects, rack mount, etc

u/FRancIK · 1 pointr/BudgetAudiophile

Yamaha AG06 interface/mixer might be what you need. It has XLR for your mic, has extra inputs, where you can connenct the phono preamp, has second input for base and you can add computer audio to your mix / output. And you can record any of that. You can choose between only channels 1 and 2 in mono or the entire input mix.

https://www.amazon.com/Yamaha-AG06-6-Channel-Mixer-Microphone/dp/B00TY8JFSC?th=1

​

And then maybe Kali audio LP-6s? These two things round exactly to 500 dollars.


https://www.amazon.com/Kali-Audio-LP-6-Studio-Monitor/dp/B07NWBSJ11/ref=sr_1_2?crid=2LOJSNOX3V2E6&keywords=kali+audio+lp-6&qid=1562636566&s=gateway&sprefix=kali+audio%2Caps%2C230&sr=8-2

u/MazcuHS · 1 pointr/battlestations

> Asus MG279Q 27" 1440p 144Hz IPS https://www.amazon.com/27-inch-FreeSync-Response-DisplayPort-MG279Q/dp/B00ZOO348C/ref=sr_1_1?keywords=Asus+MG279Q&qid=1568889772&s=gateway&sr=8-1
Dell P4317Q 43" 60Hz 4K IPS https://www.amazon.com/Dell-P4317Q-42-5-16-Microfiber/dp/B07RBBQBR6/ref=sr_1_2?keywords=Dell+P4317Q&qid=1568889797&s=gateway&sr=8-2
NZXT S340 Elite Black/Blue (can't find on amazon anymore. this would be the follower https://www.amazon.com/Nzxt-H510-Elite-Dual-Tempered-Water-Cooling/dp/B07C3SQPBB/ref=sr_1_1?keywords=nzxt%2Bh510%2Belite&qid=1568889894&s=gateway&sr=8-1&th=1 )
Asus ROG STRIX B350-F Gaming https://www.amazon.com/ROG-B350-F-GAMING-DisplayPort-Motherboard/dp/B071SGQP1Q/ref=sr_1_4?keywords=Asus+ROG+STRIX+B350-F+Gaming&qid=1568889978&s=gateway&sr=8-4
Ryzen R7 1700 @3.8GHz https://www.amazon.com/AMD-Processor-Wraith-Cooler-YD1700BBAEBOX/dp/B06WP5YCX6/ref=sr_1_2?keywords=Ryzen+R7+1700&qid=1568889999&s=gateway&sr=8-2
MSI GeForce RTX 2080 DUKE 8G OC https://www.amazon.com/MSI-RTX-2080-DUKE-8G/dp/B07GHXMMYF/ref=sr_1_1?keywords=MSI+GeForce+RTX+2080+DUKE+8G&qid=1568890061&s=gateway&sr=8-1
Corsair Vengeance LPX 2x8GB 3000MHz CL15 https://www.amazon.com/Corsair-Vengeance-3000MHz-Desktop-Memory/dp/B0134EW7G8/ref=sr_1_1?keywords=Corsair+Vengeance+LPX+2x8GB+3000MHz+CL15&qid=1568890088&s=gateway&sr=8-1
Seasonic Focus Plus Gold 450W https://www.amazon.com/Seasonic-SSR-450FM-Semi-Modular-Warranty-Compact/dp/B0778XB7CK/ref=sr_1_2?keywords=Seasonic+Focus+Plus+Gold+450W&qid=1568890111&s=gateway&sr=8-2
Deepcool Captain 240mm White https://www.amazon.com/DeepCool-Captain-240EX-RGB-Liquid/dp/B076ZPCGYH/ref=sr_1_1?keywords=Deepcool+Captain+240mm+White&qid=1568890122&s=gateway&sr=8-1
Kingston KC1000 1TB https://www.amazon.com/Kingston-Digital-KC1000-SKC1000-960G/dp/B072ZKXL8K/ref=sr_1_3?keywords=Kingston+KC1000&qid=1568890140&s=gateway&sr=8-3
Crucial MX500 500GB https://www.amazon.com/Crucial-MX500-500GB-NAND-Internal/dp/B0786QNS9B/ref=sr_1_1?keywords=Crucial+MX500+512GB&qid=1568890157&s=gateway&sr=8-1
WD Caviar Green 1TB https://www.amazon.com/Digital-INTELLISTORE-Deskptop-1Terabyte-SATA2-SATA3/dp/B06XR3DDCB/ref=sr_1_2?keywords=WD+Caviar+Green+1TB+7200&qid=1568890187&s=gateway&sr=8-2
Fostex TR-90 https://www.amazon.com/Fostex-TR-90-80-Semi-Open-Stereo-Headphones/dp/B079L9ZC6Y/ref=sr_1_5?keywords=Fostex+TR-90&qid=1568890219&s=gateway&sr=8-5
Steelseries Rival 600 https://www.amazon.com/SteelSeries-Rival-600-Gaming-Mouse/dp/B078LJ6RPK/ref=sxin_2_ac_d_rm?ac_md=0-0-c3RlZWxzZXJpZXMgcml2YWwgNjAw-ac_d_rm&keywords=Steelseries+Rival+600&pd_rd_i=B078LJ6RPK&pd_rd_r=7a919f32-0b30-4130-9085-a40d0767f6b2&pd_rd_w=X4QOW&pd_rd_wg=HVxsQ&pf_rd_p=d29bc9bc-49e2-46b8-bc05-387917c341ec&pf_rd_r=G61EGBMPSP2D2K7BTSVZ&qid=1568890240&s=gateway
QPAD FX90 (not on Amazon)
Ducky One TKL RGB Cherry MX Blue (Didn't fint the exact model. It's like this, but with RGB) https://www.amazon.de/Ducky-Backlit-Gaming-Tastatur-MX-Blue/dp/B078YHST8S/ref=sr_1_12?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=ducky+one+tkl&qid=1568890765&s=gateway&sr=8-12
Microsoft LifeCam Studio https://www.amazon.com/Microsoft-LifeCam-Studio-1080p-Webcam/dp/B0042X8NT6/ref=sr_1_1?keywords=Microsoft+LifeCam+Studio&qid=1568890851&s=gateway&sr=8-1
Yamaha AG06 https://www.amazon.com/Yamaha-AG06-6-Channel-Mixer-Microphone/dp/B00TY8JFSC/ref=sr_1_1?keywords=Yamaha%2BAG06&qid=1568890863&s=gateway&sr=8-1&th=1
2x Genelec M030 https://www.amazon.com/Genelec-M030-Active-2-Way-Monitor/dp/B00CC36584/ref=sr_1_1?keywords=Genelec+M030&qid=1568890884&s=gateway&sr=8-1
AudioTechnica AT2020USB+ https://www.amazon.com/Audio-Technica-AT2020USB-Cardioid-Condenser-Microphone/dp/B00B5ZX9FM/ref=sr_1_4?keywords=AudioTechnica+AT2020USB%2B&qid=1568890898&s=gateway&sr=8-4
TEAC TN-300 https://www.amazon.com/TN-300-Analog-Turntable-Pre-amplifier-Digital/dp/B00P9W6SUK/ref=sr_1_4?keywords=TEAC+TN-300&qid=1568890911&s=gateway&sr=8-4
Skagen Falster 2 https://www.amazon.com/dp/B07H9FC6D3/ref=twister_B07TYFM5JV?_encoding=UTF8&th=1
Maxnomic Office Comfort Quadceptor OFC Brilliant Blue (a bit different stiching) https://www.amazon.com/MAXNOMIC-ERGOCEPTOR-Office-Slightly-Silver/dp/B07PQT4LD4/ref=sr_1_1?keywords=Maxnomic%2BOffice%2BComfort&qid=1568890959&s=gateway&sr=8-1&th=1

u/Llohr · 1 pointr/nvidia

I don't think I fully understood that you have an HDMI cable running from your GPU to your receiver and that's what you're using for Audio. That isn't something I've ever considered. Even with a good GPU that's sort of asking for interference.

It is possible that all of your interference is being picked up in the GPU, in which case you'd be much better off with an external DAC of some sort. Some motherboards have dedicated low-noise DAC USB ports, but even if not, digital signals don't pick up noise in the same way.

You can run your receiver off of a DAC with a balanced line and then possibly mitigate further issues with better-shielded cables.

Personally, I run a pair of LSR308s off of one of these in stereo and I've never heard anything so amazing in my life. I also have them right-side-up. I've heard a few say they sound a lot worse upside-down as you have them.

I switched to that off-board DAC because I was tired of getting interference from the on-board soundcard, even if it was just the occasional click or whine.

u/theograd · 1 pointr/audio
u/EntropyOrSloth · 1 pointr/audiophile

I'm looking for an audiophile-quality audio mixer with USB input(s) also, and a minimum of 3 channels. I've been looking at the Behringer XR12. Are there any other makes/models I should be taking a look at, besides the XR12?

u/iProbablyUpvoted · 1 pointr/podcasting

I started looking around a bit more at Automix and found the XR12. Could I pair that with a couple 3-packs of XM1800S along with appropriate cables and perhaps some desktop (conference table) stands?

The XR12 claims to be able to do "Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharing"

u/UnmannedVehicle · 1 pointr/ProAudiovisual

Is this the Behringer one you're talking about? Is $250 what I can expect to pay for something like that or does it go any lower?

I guess what I'm looking for then is just a "digital mixer" with enough XLR inputs to accept however many mics I need.

Yeah, wireless definitely not required for the panel but it's much more convenient that way.

u/Ch3mlab · 1 pointr/MusicBattlestations

ZENY Pair of Studio Monitor Speaker Stands Height Adjustable Concert Band DJ Studio Floor Stands w/Stable Triangle Base, Black https://www.amazon.com/dp/B0154G1AQM/ref=cm_sw_r_cp_api_i_vpGXDb2FVJCQB

u/MocoIMO · 1 pointr/battlestations

I used these for my a5+ speakers when I was using a smaller desk. They aren't the best but I got them on sale for like $30 and they did the job for 6+ months

https://www.amazon.com/gp/product/B0154G1AQM/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

u/demevalos · 1 pointr/headphones

No worries at all. On that power supply, there's only an XLR in, and an XLR out. There's no way to plug an XLR connection into a computer without some sort of ADC (analog to digital converter). Usually, that's your audio interface. It takes your analog XLR signal, and converts it into a digital signal that your computer can understand.

I was in your situation once, before I knew much about audio. I had an XLR mic (Shure SM57) that I used to use for my band's shows and stuff, but I wanted to use it for gaming later on. I bought this stupid thing assuming it would let me do that. Well, technically it worked, but I was so quiet that my friends couldn't hear me at all. After I returned that, I bought this Behringer interface hoping it would fix my problems. It was better, but I had to crank the volume up to full for anybody to hear me still. Plus, the headphone output on it was TERRIBLE. It sounded bad, and it behaved weird with video playback. No bueno.

Learn from my mistakes. Go this way before you spend dumb money on it haha

u/stevenvanelk · 1 pointr/podcasts

I don't use blankets or anything. I just use a Pyle PDMIC58 with an XLR to USB cable to connect the mic to my computer where I record with Audacity.

If you want to hear what that sounds like you can check out my podcast, Wedding Photo Hangover.

Also, I picked that mic based on Marco Arment's mic review. He reviewed a ton of mics and has sample audio files from those mics. You can check that out on his website marco.org.

u/Nightshade400 · 1 pointr/Twitch

In thinking about it one way around this could be to get a USB > XLR adapter. I am not sure how well they work or any specific design to recommend but I would check Monoprice for them and test one out. This way you could retain the USB mic you currently have and maybe for the second mic buy an XLR with the idea of maybe replacing the other later or if it works well keep this configuration. An XLR AT2020 may actually be less expensive than the USB version (if my memory is correct) but they are nearly identical in performance.


*Edit: Not an endorsement just an example of the cable Iam talking about XLR to USB Cable

u/GhostofDan · 1 pointr/livesound

If you are only looking to also record the sermon, etc, you can set up an aux out with a mix and send it to a laptop via usb with one of these. I use one as a backup to record the sermons in case the USB recording fails on the M32. (that happens about twice a year.) This, like love, never faileth.

u/oswaldo2017 · 1 pointr/audiophile

5.1 means nothing with respect to quality. It is only for surround sound. If you want that, it's great, however it is not required by Not means. Under 500 is absolutely doable. I would look at the SMSL Q5 Pro DAC/amp. It has a remote and will power most passive speakers fine. On the speaker note, JBL Studio 230s would work great. That total would be around 400 ish. You really don't need a subwoofer, but with the Q5 you can add one later.
For stands check out: https://www.amazon.com/dp/B076X9C7H1/ref=cm_sw_r_cp_apa_Ua31Bb2WTE1SS

All you would need then is an optical cable from your TV, and speaker wire for your speakers.

u/stevenswall · 1 pointr/audiophile
u/the_blue_wizard · 1 pointr/audio

How many of these - $$$$$$$$$$$$$$$$ - do you have to spend?

Most passive sound bars are not Stereo, but are made for an AV system, so they are Front/Center/Right -

Purely to illustrate what I mean.

https://www.amazon.com/Luxury-Two-Way-3-Channel-Passive-Soundbar/dp/B07FGDBMV6/

https://www.amazon.com/Dayton-AudioBS36-36-Inch-Speaker-Black/dp/B000YQBW5C/

Generally, the Center aspect would go unused.

If you go a sound bar, then you are going to have considerably smaller speakers.

Any chance we can get a photo of your current set up? Where are the speakers placed now? Would it help to put the speakers on Stands?

https://www.amazon.com/Pyle-Studio-Monitor-Speaker-Stand/dp/B076X9C7H1/

https://www.amazon.com/Pyle-Sonos-Speaker-Stand-Holder/dp/B00JEFNSKG/

These are both height adjustable.

There are also Desktop Adjustable Speakers Stands, I don't see how they could help you, but are worth being aware of -

https://www.amazon.com/Monoprice-Universal-Monitor-Riser-116250/dp/B01M728U0I/

While I suspect you can find a Soundbar to get the job down, I question whether you will be satisfied with it.

What is the Brand and Model of the speakers you have now?

There are several 2.1 Computer Speaker systems that use very small Front/Desk speakers. If necessary, they could be placed on their sides rather than standing upright-

https://www.amazon.com/s/ref=nb_sb_ss_c_1_21?url=search-alias%3Daps&field-keywords=2.1+computer+speakers&sprefix=2.1+computer+speakers%2Caps%2C536&crid=1MWLL42CVTEUT&rh=i%3Aaps%2Ck%3A2.1+computer+speakers

Given that you have very decent equipment, I'm concerned about making downgrade suggestions.

We can make random suggestions, but without a lot more information and perhaps a photo, it is going to be hard to make productive suggestions.

Don't let being lock into one way of thinking block you from seeing alternative solutions. I once agonized for months trying to figure out how to make my TV Stand work with a larger TV. Then one day I was walking through Walmart and saw the perfect TV Stand on sale. As long as I was locked into making the existing stand work, it was an impossible task. But by perusing an alternate solution I was up and running for $100.

That doesn't directly apply to you but it illustrates how being trapped into one way of thinking can prevent a solution. For nearly every problem ...ingenuity... is the real solution.






u/JoeM1977 · 1 pointr/hometheater

I have my Elac surrounds sitting on these and they work well for me.
Pyle Dual Studio Monitor 2... https://www.amazon.com/dp/B076X9C7H1?ref=ppx_pop_mob_ap_share

u/goldscrolls-c · 1 pointr/PS4

Just to confirm:

ps4 connected to Optical to RCA analog converter

https://www.amazon.com/dp/B06XDLCHY7/ref=cm_sw_r_cp_api_i_2Sx1DbEX2GJC1


Then: RCA to XLR cable run from converter to speakers

https://www.amazon.com/dp/B077L3PG45/ref=cm_sw_r_cp_api_i_IVx1DbM7QG40N

u/Polympics · 1 pointr/battlestations

No storage underneath, but these are much nicer imo.

u/CrackAnus · 1 pointr/audiophile

There are several models of Alesis USB powered monitors with varying connectivity options.

For example, the Alesis M1 Active 320 USB Powered Studio Monitors take USB or unbalanced RCA or TS inputs, and provides speaker level signal to the unpowered monitor through a TS connector.

The Alesis M1 Active 520 USB Studio Monitors take a pair of TRS balanced inputs, and provides speaker level signal to the unpowered monitor through a TRS connector.

Information about specific Alesis products is available at https://www.alesis.com. You may wish to refer to the manual of the specific Alesis USB monitors you are considering.

Most powered speakers that take balanced inputs will also take unbalanced inputs through an appropriate cable. There are many cables having one balanced end and one unbalanced end, for example:

https://www.amazon.com/TISINO-Stereo-Splitter-Unbalanced-Breakout/dp/B07DMWZPML/

https://www.amazon.com/Monoprice-Connectors-Shielded-Oxygen-Free-Conductors/dp/B001UJH0XU/

u/boojit · 1 pointr/audio

If you have to use that device as if it's a soundcard device on the laptop, but wireless, the only way I can think of to do this is with some "network USB hub" gear. This will basically extend your usb cable over your LAN (wired or wifi) to allow your laptop to connect to your SE22 as if the USB cable was plugged into the laptop.

Unfortunately, these are hard to come by these days. Belkin made one that I had very good luck with back in like 2012 (used it for professional applications), but although they are still available on amazon, they are discontinued and YMMV getting it to work with Windows 10. There's also this one which I cannot vouch for and it's a bit expensive. Finally, there are software options which you may be able to wire up with another device of your own; perhaps like a raspberry pi or some such. It might be an adventure in learning!

All of these solutions will require a rock-solid fast wifi connection, probably won't handle any communication breaks well, and will introduce a bit of latency into the equation. If you're just trying to play music for listening, this shouldn't matter. But if you're trying to do sound editing or whatnot, it probably will matter. Again, YMMV.

EDIT: Another thought, if you just want to play music through your 8020's ...why do you even need to use the SE22 at all? Just get yourself like a Chromecast Audio (discontinued, yes, but easy to find) and get yourself one of these cables and plug the chromecast directly into your 8020's.

u/shoturtle · 0 pointsr/BudgetAudiophile

Sounds like you need an audio interface with usb and line in input to work with the laptop and your cell phone. I would go with the interface for the computer. As the USB will send a cleaner signal vs the 3.5mm

Or get a cables like this.

https://www.amazon.com/Hosa-CMP-159-Stereo-Breakout-Cable/dp/B005HGM1D6/ref=sr_1_25?crid=2ZG6HGWDZ4CLF&keywords=audio+interface+with+line+in&qid=1555876216&s=musical-instruments&sprefix=audio+interface+with+lin%2Cmi%2C236&sr=1-25

​

https://www.amazon.com/TISINO-Stereo-Splitter-Unbalanced-Breakout/dp/B07DMWZPML

u/rosskw · -1 pointsr/podcasts

It's an awesome deal, I got one last year. There are a few more awesome podcaster deals here:
https://www.podcastinsights.com/amazon-prime-day/

The Yamaha AG06 Mixer seems to be the only decent mixer for podcasting - but the shipping time is a little long now.