Best stuffing & polyester fill according to redditors

You'll want worsted weight yarn and a size E or F hook (I think, I don't usually make amigurumi). You'll also need stuffing. I use yarn scraps, but since you're brand new you won't have any so I'd suggest poly-fil stuffing. Eyes optional.
Michael's has 40% off coupons almost every week (only good for one regular priced item). I think other craft stores do too, but the others aren't in my country.
Nerdigurumi has great tutorials such as the difference between right and wrong sides.

Not sure why you don't want to order online - I mean amazon has this and it's available on prime. So you'd have it by Wednesday or next week if you ordered today.

Shit I’m sorry, each the top and the bottom are $30 not combined, I did it in March and I misremembered this is the bottom and heres the top there’s a chart for how much you need

I got this 5 pound box years ago when I first got into crafting and thought I would make LOADS of amigurumi. Fast forward 4 years and it's still pretty full...

Erm, of course, you wouldn't need to buy the 5 pound box, but your local craft store might sell smaller bags (plus, if they have the 40 or 50% off coupons, you get it for way cheaper!). That said, I hope the TP idea was a joke cuz you wouldn't be able to wash it D:

Oh, and if you happen to be a spinner or have spinner friends or perhaps a sheep farm nearby... You could stuff the hexipuffs with bits of leftover fluff! It would make for a warm quilt. :)

I don't know if this will help much, but here's the pictures for my build. I used cardboard to make the templates for everything and then transferred it to 3/4" MDF.

I also didn't use expandable foam, but automotive seam sealer instead. I sprayed the inside of the quarter panel and all of the interior of the enclosure with DEI Boom Mat and filled the enclosure with Polyester Fiber Stuffing

I screwed the part that the speaker mounted in from the back side so you didn't see any screws.

Hole cut and test fit

With grille

Mock up

Rear Upper Baffle Installed

Rear Lower Baffle Installed

Rear baffle sealed

Front baffle installed

Front baffle sealed

Mounting the face

Wires run

The hemp fiber makes all the difference with concentrates. Any dry herb you add will had a vaped herb taste.

https://www.amazon.com/Kilogram-Grade-Degummed-Hemp-Fiber/dp/B014X07XT8/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1487003712&sr=1-1&keywords=degummed+hemp+fiber

When I got it it was only $20

I found this https://www.amazon.com/Kilogram-Grade-Degummed-Hemp-Fiber/dp/B014X07XT8. It's 1/2 Kilogram... how long would that last?

https://www.amazon.com/Avler8482-Caliber-Steel-Bearing-Slingshot/dp/B00EYUYQA2/ref=mp_s_a_1_6?keywords=ball+bearings&qid=1557031956&s=gateway&sr=8-6

$13 for 1.75 pounds of ball bearings.

https://www.amazon.com/Hughapy-Weighted-Blanket-Stuffing-Diameter/dp/B07PPL3YHF/ref=mp_s_a_1_5?crid=PHULA0USKBFI&keywords=glass%2Bbeads%2Bfor%2Bweighted%2Bblanket&qid=1557032137&s=gateway&sprefix=glass%2Bbeads&sr=8-5&th=1&psc=1

$28 for 10 pounds of glass beads.

I use poly fill like the stuff in cheap pillows.

Amazon Link

Do you mean these plastic poly pellets? They say are washer dryer safe.

Victory Pellets (10 LBS) Plastic Poly Pellets https://www.amazon.com/dp/B074T3J8CW/ref=cm_sw_r_cp_api_i_9I8PDbCY4KRSY

have you tried fluffing it up a bit? you can also try to open up the insert and re-distribute the stuffing if fluffing doesn't help. finally, if nothing works and you need to add filling/stuffing to your insert, people who make their own inserts recommend these two: (link one, US only), (link two, amazon US). for those outside the US, you'll want to look for a store that sells sewing or arts and crafts supplies and you'll want to look for premium polyester (cluster) fiber. DHR6000's spec sheet says their stuffing is "High-grade polyester silicone cotton 100% polyester Cotton" if you want to try to find the exact type, but i get the feeling the different wording is due to auto-translation of the terms.

Yes because its very economic this way, and it is also very easy to fill, so the best way is to buy the Polyester Cluster Fiber Filling near you at Amazon : https://www.amazon.com/Polyester-Cluster-Filling-Crafts-Stuffing/dp/B01I3N2XTG/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1524954597&sr=1-1&keywords=polyester+cluster+fiber+filling

here is a video about how to fill it : https://www.youtube.com/watch?v=pyBXB2ZqBe8 just don't use your old clothes as she did in the video, use the Polyester Cluster Fiber Filling is much better and easier.

I found these (not OP):

https://qualityplasticpellets.com/order-pellets/

https://www.amazon.com/Victory-Pellets-Weighted-Blankets-Tumbling/dp/B01EKCOAPY/

They're still pretty expensive though :/

​

​

Here

It's wicked with raw cotton.

http://www.amazon.com/Organic-Raw-Cotton-Natural-Color/dp/B00L98JK4O

https://www.parts-express.com/dayton-audio-18-ultimax-subwoofer-and-cabinet-bundle--300-7099

https://www.amazon.com/Polyfill-Stuffing-Polyester-Pounds-Schonfeld/dp/B0085A87NY

https://www.amazon.com/Titebond-Ultimate-Wood-16-Ounces-1414/dp/B0002YQ3KA

https://www.amazon.com/Behringer-NU3000DSP-BEHRINGER-iNUKE/dp/B005EHINAS - 1250 watts RMS into 8 Ohms (bridged) for series voice coils.

Cabinet + driver is $425. Polyfill is under $10 per pound, less if recycling pillows. $11 for the wood glue. $280 for the amplifier, $240 if using Amazon Warehouse deal. Total cost is right around $750, a touch higher if you need to rent some clamps for 24 hours to put it together.

Of course, my whole post is sort of wasteful because I see that the driver is out of stock.

I've seen these in person before.

I couldn't open it up, but it felt like it was packed firmly with batting or something similar.

Basically, it's stuffed with the same material as a teddy bear, or a thick comforter.

This fiber-fill off my crochet wishlist would be amazing!

I have a bunch of yarn I want to make stuffed animals with, but nothing to stuff them. ;~;

The Old Apartment. Thank you for the contest!