Best toy & model crafts books according to redditors

We found 134 Reddit comments discussing the best toy & model crafts books. We ranked the 78 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

Dollhouses books
Miniatures books
Model trains books
Model buliding books
Stuffed animal crafts books
Toy making books
Doll crafts books

Top Reddit comments about Toy & Model Crafts:

u/Rumblotron · 9 pointsr/Warhammer

Cosmetic wedges are infinitely superior to cotton buds (q-tips) when it comes to blending/cleaning up oil washes, watercolour washes or weathering powders.

I save the plastic-topped cork stoppers from whiskey and gin bottles, as they make excellent mounts to hold single models while painting.

Its good to have a supply of pokey sticks on hand. Toothpicks, bamboo skewers, coffee stirrers, bits of wire - they're all useful for stirring paint, prodding bits into place or encouraging superglue into the right spot.

Masking tape - Tamiya and 3M ScotchBlue are excellent for painting patterns like camo, hazard stripes or heraldry. Silly Putty is also amazing if you're airbrushing and need a quick mask.

Baking soda (not baking powder) makes superglue harden instantly and fill gaps. Don't use it for glueing miniatures, but it works very well if you're building your own scenery or doing a scenic base.

Model-making and working at small scale extends way beyond Warhammer. Look to model railways, historical stuff, architectural model-making, props, costume and theatre design, and you'll find masses of useful tips and ideas.

Edit:
This is one of the few very good books on model-making with loads of interesting tips and resources. The book's author David Neat has a great site with plenty of things to learn







u/Henduriku · 9 pointsr/architecture

Look at getting this book: http://www.amazon.com/Model-Making-Materials-Methods-David-Neat/dp/1847970176/ref=sr_1_1?ie=UTF8&qid=1394646633&sr=8-1&keywords=modelmaking+materials

That would be my approach but I would also create a jig to hold the windows while they dry. I would also take my time. Allow each piece to dry well before moving on.

Also I never use CA (super glue) for anything clear. It usually fogs and unlike the solvents (welding type adhesion), it adds material to the pieces you are gluing. Here is a lot of good info for your next attempt: http://www.bcae1.com/plexi.htm

u/nickhalfasleep · 8 pointsr/modeltrains

John Armstrong's Track Planning for Realistic Operation is a great book:
https://www.amazon.com/Track-Planning-Realistic-Operation-Railroader/dp/0890242275

I like Lance Mindheim's books for modern operations on smaller layouts too:
http://lancemindheim.com/book-store/

u/Kallahan11 · 8 pointsr/rocketry

Can't go wrong with the handbook if you like dead trees.
http://www.amazon.com/Handbook-Model-Rocketry-7th-Official/dp/0471472425/ref=sr_1_1?ie=UTF8&qid=1416447676&sr=8-1&keywords=handbook+of+model+rocketry


For videos check out Apogee components youtube channel.
https://www.youtube.com/user/apogeerockets


Check out the National Association of Rocketry's website www.nar.org

Also www.tripoli.org but they are more focused on High Power, the NAR website has better beginner information.


I really like to point to starter kits as a good way to get started. They come with launch pads and proper ignition systems and instructions not only on how to build the rocket but also how to launch it.


Asking questions here is always a good idea!

u/used2bgood · 8 pointsr/Wishlist

That looks great! I love making felt stuff - I made my little a laptop. Jeannette Lim has great felt books, and the library usually has a bunch of them.

u/TheCardinal_ · 7 pointsr/SubredditDrama

I can't get behind that. Because "crazy" is just another way of saying "I don't understand ____ and don't care to".

But I'm the kind of person that does. And I think if one takes issue with conspiracy theorists distractions, and I do, that it's important that we must should understand them, and offer an alternative view. So.

If any word came close to understanding a conspiracy theorist it might be this...

"Control Freak"

Because the capital 'T' truth is this - ...the world is rudderless. Nobody is in control...

But that's terrifying. Especially to those who like things organized. Which many men do, especially nerdy men. And that's why most conspiracty theorists are so predominantly men aged 18 -35. That's part of their struggle - how to temper this need for control with a chaotic world - but that's a subject explored best in art, poetry. wise philosophy and most likely comedy. It worth asking why the the gender attributed with 'womens intuition' - aka 'understanding people' - doesn't concern themselves with conspiracy theory.

These guys. Often smart, possibly improperly or under-educated, but with the sufficient intelligence (and free time) to occupy themselves with such thing. At worst they are "rudderless nerds" like an american muscle car with more power than steering - that comes with a proper education and critical thinking that college forces on you wether you like it or not. Some more than others.

With that being said the most common factor they all share is their need to organize, explain, and control a chaotic world.

Lastly. *If I were to offer my own take on "why things suck" I would offer that Psychopathy is why things are the way they are and that there is far less cooperation amongst power than competition - be it corporations, media, governance or education. Nobody is solely in power but they're all vying for it, and we're all just stuck in between.

Beware The Psychopath My Son by Clinton Callahan

'Why Your Life Sucks' by Noam Chomsky

u/fotbr · 5 pointsr/modeltrains

If you can get your hands on 101 Track Plans (often available via your local library) you'll find plenty of plans that can work as-is or can be easily adapted to your table.

u/SevereWxEddie · 5 pointsr/modeltrains

I would highly highly highly recommend picking up the book ["101 Track Plans for Model Railroaders."] (https://www.amazon.com/Hundred-Track-Railroaders-Railroad-Handbook/dp/0890245126/ref=sr_1_1?ie=UTF8&qid=1503265427&sr=8-1&keywords=101+track+plans) There is essentially a whole chapter dedicated to 4x6 sized layouts, as well as 4x8s, and it is a resource that will pay dividends if future space opens up as well.

It's a great idea book, and with only so much space to work with, a lot of interesting designs have already been created for that space.

Another resource you might consider, especially since you already are using Atlas track, is any of the Atlas HO track planning books. They may not have as much variety as 101 Track Plans, but some of them show you how to build a complete railroad from start to finish, which could be useful.

Hope this helps!

u/zarqghoti · 5 pointsr/rocketry

You stated you are a complete beginner. We are experienced and are trying to explain to you that you are jumping into the very complicated deep end. It is vitally important for your safety, the safety of those around you as well as the public at large and the hobby in general that the rules be adhered to. There is no need to re-invent the wheel, there is lots of experience available and lots of stuff people have already created. Safely. :)

Our hobby is an enjoyable one, but if not done safely can be extremely dangerous for you and others. It is important to learn the ropes, learn the rules and follow the safety codes. Both NAR and Tripoli have safety codes for a reason. Scratch built motors are a Level 3 thing for a reason. Active stabilization is not allowed. And we have rules from various government agencies we have to follow. Hopefully /u/narprez will chime in as well, he has done some excellent safety talks, is the president of NAR, and is L3 certified.

Join NAR, you get lots of great materials with membership that are useful for the novice and experienced alike. Go to launches and meetings. Talk to the people, especially the certified ones and club members. Do the same with Tripoli. Take your time, study and learn. Read the previously mentioned book. Check out this book too (I don't like it as much as the first one mentioned, but it is still useful, especially for the novice):
Handbook of Model Rocketry, 7th Edition (NAR Official Handbook) https://www.amazon.com/dp/0471472425/ref=cm_sw_r_an_am_at_ws_us?ie=UTF8

So please, learn to walk before you try to learn ballroom dance. :)
In the hobby we (nearly) are all very willing to share what we know and help out.

u/FullFrontalNoodly · 5 pointsr/rocketry
u/skyress3000 · 5 pointsr/rocketry

I'm pretty sure the Handbook of Model Rocketry (made by NAR) is pretty good; I have an copy which I've looked at a little bit and it seems pretty thorough in covering the subject. It looks like there's also a kindle version, here's the amazon link: https://www.amazon.com/Handbook-Model-Rocketry-7th-Official/dp/0471472425

u/Tavyr · 5 pointsr/modeltrains

I believe this is pretty much required reading around these parts. If nothing else it'll give you some good ideas to build upon.

u/Purple909 · 4 pointsr/EARONS
u/CultivatedThug · 4 pointsr/EARONS

Interesting, there is also a book about knots by a Kat Winters: https://www.amazon.com/Little-Book-Knots-Kat-Winters/dp/1930408404/ref=sr_1_4?s=books&ie=UTF8&qid=1506618691&sr=1-4&refinements=p_27%3AKat+Winters

Perhaps a love of knots made Kat aware of and interested in EAR/ONS back in 2005? If only this were true, how life can be so random and arbitrary!

u/terracottatilefish · 4 pointsr/creepy

THere's a book of these out with lots of good closeups-- The Nutshell Studies of Unexplained Death

The only problem is that they don't explain the crimes.

u/lcorinth · 4 pointsr/rocketry

I got started with friends, just going out and launching some kits a friend had built. Then I thought I should get my own to have some time, in case we did it again. I meant to just get a few pre-made rockets so I wouldn't have to do any building or mess anything up.

I went on Amazon, and saw a rocket called Der Red Max by Estes - it's in this video several times. It's a classic Estes rocket that's red and black and styled a bit like the Red Baron's airplane. It was so cool looking, and was only 17 bucks, but it required assembly - something I was nervous about. But they only had one left, so I bought it, carefully read the instructions, and put it together, and it turned out looking beautiful. Once I launched it, and it worked and flew so well, I was hooked.

From there, I started reading stuff online. There is a TON of information and resources out there. A good website to ask questions is The Rocketry Forum (TRF) - especially the beginner's section. There are a lot of experts there who will help you out.

There are lots of ways to start, but I recommend starting by getting something called a launch set or launch kit. With this, you get a rocket (or two), plus a launch pad and launch controller for less than you'd pay buying these things separately. I didn't have one right away, since I was using a friend's equipment, but I wanted my own, so I got one. I gave the rocket away to a kid who came to a launch, but I still have the pad and controller.

Several rocket companies, particularly Estes and Quest Aerospace, have these. My own recommendation is to start with Estes, as it's the most prevalent company, and you can get everything you need through them.

You can get an Easy To Assemble ("E2X) or Ready-to-Fly kit, or if you want to do some assembly, you can get what's called a Skill Level 1 kit. These are not difficult, but require a bit of cutting, sanding and gluing, and the ability to read and follow directions.

The Launch Kit gives you everything you need to get started except motors - sometimes called "engines" (doesn't matter - they make the rocket go up) - and recovery wadding. You'll need some of that (there's other stuff you can use - cheaper stuff, too, but when you're just getting started, it's the easiest).

Get the kit, follow the instructions, and buy the motors recommended on the package. Read and follow the National Association of Rocketry (NAR) Model Rocket Safety Code. This will help you avoid hurting yourself or someone else, which could put you off the whole thing.

Go out and launch your rockets. Then, when you've inevitably decided you want to do more and know more, check out TRF, and get yourself a copy of The Handbook of Model Rocketry by G. Harry Stine and Bill Stine. It's required reading. Won't tell you much about how to assemble kits - they all come with instructions anyway - but it will help you understand the important basics of the hows and whys of model rockets.

I've got a blog in which I've been detailing my learning process of building and launching rockets over the last six months, and I also try to pass on information to people just getting started - rocketry for beginners by a beginner - so that they can maybe learn from my mistakes. Check it out, if you want to, and send me an email, and I can send you some more information if you'd like.

This is a really fascinating, fun hobby, and there's so much to learn. It can get really sophisticated and amazing - I like to tell my friends "it's not just for Webelos any more."

Edit: Oh, and if you're already past the part of building and launching a couple rockets, then I'd get that book and head straight for TRF - those are the next logical steps, I think.

Edit #2: Here's a more detailed post on launching your first rockets.

u/isle_say · 4 pointsr/howto

This may not be quite what you have in mind, but I have made two of these boats and they are cool. They take more than six hours though.

http://www.amazon.ca/Building-Six-Hour-Canoe-Richard-Butz/dp/0961039671

u/IamNorwegian · 3 pointsr/engineering

"Model Aircraft Aerodynamics" by Martin Simons is brilliant.

Amazon link

u/Daniel379ba · 3 pointsr/rocketry

I like learning from books.

I suggest first going through this book: Handbook of Model Rocketry

Learn the concepts (things like CG, CP, thrust vs impulse, etc) and apply them by building multiple rockets with different aspects.

Once you've gotten everything you can out of that book, get this guy: Modern High-Power Rocketry 2. Work your way through it by joining a local NAR/Tripoli chapter. Get your L1 cert, spend some time there doing multiple projects. After you've done a fair amount, go get your L2. Maybe a year later, go for your L3. Projects you can do in each cert level:

  • Go for speed
  • Go for altitude
  • Two stage
  • Dual deploy
  • Cluster

    Or just have fun building rockets you think look cool or are fun to fly!
u/thetwelvecolors · 3 pointsr/myfavoritemurder

There's a fantastic book about this woman and her models with photographs and schematics showing off all the little details! I wish I could see them in person. They're an incredible piece of crime investigation history.

u/Puripnon · 3 pointsr/lego

This is by Legorobo. He has a couple of ebooks full of his mechs and robots and a homepage in Japanese.

u/FrakNutz · 3 pointsr/rocketry

I'd also recommend [Make: High-Power Rockets](make: High-Power Rockets: Construction and Certification for Thousands of Feet and Beyond https://www.amazon.com/dp/1457182971/ref=cm_sw_r_cp_apa_ssmNAbZ38X89S)

I'm using that one as well as the Canepa book as I work on my Level 3 cert project.

u/fourcupsoftea · 3 pointsr/crafting

A bit of both. I have a pattern book, but I used it more as a guide this time. I've made dozens of sock monsters, but this is the first with articulating legs

Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks https://www.amazon.ca/dp/1579906109/ref=cm_sw_r_cp_apa_i_Vsi4DbE8N811K

u/wh20250 · 3 pointsr/rocketry

the Handbook of Model Rocketry, which would be geared more toward the scale you are looking at building, would also be a great place to start.

u/MelAlton · 3 pointsr/rocketry

Two things:

  1. Information on what makes a rocket stable, and on multi-staging

    Handbook of Model Rocketry (Amazon, Local Bookstore or Library

  2. Software tools:

    OpenRocket - model rocket design software
u/Jax_mm · 3 pointsr/EngineeringStudents

Handbook of model Rocketry is a good book for basics
One of the guys on my rocket team lent me his when I wanted a good overview of everything

https://www.amazon.com/dp/0471472425/ref=cm_sw_r_cp_apa_7q0dAbT602S5E

u/frostysnowcat · 2 pointsr/IAmA

http://www.amazon.com/Handbook-Model-Rocketry-Edition-Official/dp/0471472425/ref=sr_1_4?ie=UTF8&qid=1335721652&sr=8-4 Has all the info you need for basic info. As for kits, Amazon has a number of rocketry kits for starting off.

u/Placketwrangler · 2 pointsr/pics

>Will that be enough?

Not far off.

u/redneckrockuhtree · 2 pointsr/rocketry

CG is easy -- put a motor in, pack the recovery system and find the point where it balances. That's the Center of Gravity.

CP is calculated via modeling. The easiest way is RockSim or Open Rocket. It's the center of aerodynamic pressure.

Do you understand the significance of CP and CG to flight stability? If not, I'd suggest you pick up and read a copy of either Modern High Power Rocketry 2 or The Handbook of Model Rocketry

Both are very good reads with a lot of great info.

u/Johnsonsi · 2 pointsr/sewing

Claude is a Stupid Sock Creature
http://www.amazon.ca/gp/aw/d/1579906109
I would have posted more pictures but I'm using a mobile and I can't brain today

u/Highandfast · 2 pointsr/aviation

Yes, that's much clearer. I also very good reviews of this book.

These forums are worth gold.. Take a look at the other ones too.

I'm a bit short on resources on this topic unfortunately, but I guess you have to make up your own Google requests based on these little starting points. Don't hesitate to ask questions here too.

u/roborabbit · 2 pointsr/modeltrains

Model railroading is such a broad topic that has so many facets to it that you can get advice on. Even within scenery and laying track there is so much to discuss that it is dificult to give general advice. Here goes:

  • Plan ahead. You will have a lot more fun running trains if you have a well designed track plan. If you plan even just a few well placed sidings you will have fun rearanging cars. You can get advice here if you draw up some track plans.

  • Lay track well. Nothing will ruin the fun of running trains faster than poorly laid track. Kinks, s-curves and tight radius turns will lead to frequent derailments.

  • Minimums. For HO scale a 4' x 8' layout is a tight minum. With modern equipment it will look unrelistic on tight radius curves and your trains could derail.

  • Train shows and train clubs. Look for some in your area. A great way to meet people and have them give you hands on model train advice.

  • Books. There are lots of great books out there on helping you build your first layout. These books I have and like: The scenery manual. Bench work. Track Planning.
    These books look interesting for a beginer: scenery. Step by step. If the books are out of print then search Amazon for a used copy or find them at a train show.

    Tell us about what your plans are. How much space do you have? Do you have track yet? What kind of track? Are you going to model a specific area or road? Do you have a DCC system? If you give us some specifics we can give you better advice on what you will be building.
u/FoosYou · 2 pointsr/modeltrains

Not that I know of. I use SCARM, which is free, and it's worked pretty well aside from a bit of a learning curve. I hear a lot of people use Anyrail but I like free :)

I also highly recommend the 101 Track Plans book.

u/Gungyver · 2 pointsr/Gunpla

thanks. hmm think its about time i get started on another book for pepole who want to learn what am teaching myself. a USA produced book on how to paint, kitbash or scratch build: gunpla and there extra equipment. hmm i should post something one here so i can use this as research for this new book.

here is a link to my first book:https://smile.amazon.com/Decals-details-plastic-models-Gunpla-ebook/dp/B00VQ0LECQ/ref=sr_1_1?s=fiona-hardware&ie=UTF8&qid=1468877436&sr=8-1&keywords=Decals%3A+How+to+hand+paint#nav-subnav

u/confused_ape · 2 pointsr/boatbuilding

You can glass the simplest of projects. https://www.amazon.com/Building-Six-Hour-Canoe-Richard-Butz/dp/0961039671 but first you have to build the boat to glass it.

I've glassed a couple, it's not difficult, lots of flat surfaces, no big deal. Kids can do it.

If you don't want to go to the trouble of building a boat, and I don't blame you, then just buy the cheapest sheet of plywood from the orange or blue box and go to town. Try to get a perfect finish.

Contoured surfaces are slightly different, but you don't want to start there, mainly because it involves you building a boat with contours to work with.

I have experience from GlassMaster, and what you do now has no actual relevance to individual construction and finishing.

u/rabbits_for_carrots · 2 pointsr/space

This is more focused on rocketry than space; however, this might be interesting. I have only read bits of it, but this sub has recommended it before as a relatively "gentle" introduction into rocketry, but also contains more technical material in the appendices if your child would like to forge ahead.


http://www.amazon.com/Handbook-Model-Rocketry-Edition-Official/dp/0471472425


Though it concerns model rockets, many of the basic principles are all still relevant.


There are plenty of cheap older versions out there too that cover similar material, maybe just lacking a bit on electronics and internet resources.



Edit: if they are interesting in astronomy and those aspects maybe a basic introductory parent-child project on radio astronomy or a simple telescope would be fun too!


Here is an "Itty Bitty Telescope" project to make basic radio telescope if you happen to have an old TV Dish:
http://www.aoc.nrao.edu/epo/teachers/ittybitty/procedure.html


Other radio astronomy ideas too: http://www.radio-astronomy.org/getting-started

u/loptopandbingo · 1 pointr/boatbuilding

try the six-hour canoe. It's a stable little vessel, easy to understand the construction, and very little spiling needed to lay it out. Built one when I was 13 for my first boat, and I still have it (31 now)

u/keepfighting · 1 pointr/Random_Acts_Of_Amazon

I'm just looking forward to a nap and cuddles with my dog. And I'm feeling motivated to start a few craft project this weekend. Thanks for the contest! I hope your week gets better :)

catdog god I miss that show.

u/idjitfukwit · 1 pointr/woodworking

If you've never built a boat before I would recommend getting "Building the Six-Hour Canoe".

$100 and 20 hours of work (never trust a designers building estimate) will give you a surprisingly able little boat and a pretty good feel for what you're letting yourself in for before you write a check for $1300.

Which, incidentally, seems a lot of money to pay for the materials necessary to build a plywood canoe.

u/Yoda-McFly · 1 pointr/rocketry

Check with the National Association of Rocketry http://www.nar.org/ and look for a club near you. Attend a launch, and ask questions.

Pick up a copy of the Handbook of Model Rocketry.
https://smile.amazon.com/Handbook-Model-Rocketry-7th-Official/dp/0471472425/ref=mp_s_a_1_2?keywords=handbook+of+model+rocketry&qid=1566343391&s=gateway&sprefix=handbook+of+mo&sr=8-2

u/Tzelanit · 1 pointr/Warhammer40k

If this is the Codex you have, you'll definitely want to switch to the new Codex.

The new Codex doesn't just include the new Vanguard Primaris units, but is an over all refresh of the Space Marines, including rule and points adjustments across the range.

The older Codex is essentially obsolete, and the new one would be required if you were to enter any sort of competitive event.

u/magnumix · 1 pointr/woodworking

Get yourself a block of basswood. While it does not have the best grain, it is an excellent and easily carve-able wood--probably the most highly recommended for beginners due to the ease to work with for carving. I've actually seen basswood for sale at the wood working section at Micheal's.

Pick up maybe a beginners handbook with some guides if you want some patterns such as this

Finally, you'll need yourself some tools. There are expensive tools, and not-so-expensive tools. Honestly, I'd go with the inexpensive just to try it out.. if you find yourself more interested invest in something better. This is a really cheap set and will give you everything you need Amazon Link Here

u/heres_one_for_ya · 1 pointr/modeltrains

I totally agree with what CiderDrinker said. I started out on a 4x6 and got a feel for what I liked, built some models, and really affirmed that I wanted to keep going with the hobby. I started out with Bachmann EZ track and I suggest you do the same. Actually I would recommend using Kato's version of EZ track, called Unitrack. I hear better things about the quality, etc... But the "plug and play" aspect will let you focus on the basics of setting up a layout without getting bogged down in things like electrics, feeder wires, etc.

My advice to you... Plan plan PLAN! Download one of the track planning softwares on the sidebar. I have the free version of AnyRail which is more than plenty. It has every track library possible including Kato and Bachmann. If you really want, get a basic layout going but don't lay down anything permanent. Then you can see things hooked up and working which is pretty satisfying. But in the meantime, plan out a more permanent layout with one of those track planners. I've made some mistakes in planning by just setting things up without really planning out how everything will work, and to be honest I'm kind of losing interest because I don't have a ton of things to "do" on my layout right now.

You'll hear this in any FB group or subreddit, so I'll just start the conversation. Buy a copy of Realistic Track Planning... I haven't read it yet but I have a copy and I need to get into it. Everyone tells me it's a great book to have around. Pick up a couple more of those books too. Maybe one on trackwork, one on realistic operation, one on scenery... whatever looks interesting to you :) . The moral of the story is, have patience and know that it might suck to wait so long but the end result will be far more fulfilling than just winging it and hoping it works out!

The best part about this hobby is all the learning and information. You will make mistakes and come across things you like and don't like, and can adapt from there

u/TallForAStormtrooper · 1 pointr/modeltrains

I strongly recommend starting with a simple operations plan that covers what trains will do on your layout. You don't need to use prototype rules but if your trains have nothing to do besides go round and round for no reason, you will get bored after a couple weeks. Knowing why your railroad exists will inform your track plan much better than what will fit in your space.

For example, I'm building a railroad which carries supplies to a dam construction site.

Track Planning for Realistic Operation by John Armstrong is the bible for model railroad track planning.

I also like Byron Henderson's website for learning basics while waiting for the book to arrive from Amazon, and for tips and tricks which the book doesn't cover.

u/handamputation · 1 pointr/Warhammer40k

Would this be the most up to date Codex?

Thanks for the reply!

u/crusader86 · 1 pointr/AskMen

A) You're a dick
B) I got her a copy of The Nutshell Studies of Unexplained Death because she likes murder.

u/Houki01 · 1 pointr/tarot

I use a slightly smaller than playing card sized (67mm x 81mm) deck that was published by Running Press as part of their Miniatures series in 1996 and rereleased in 2002. Its art is evocative in that it has images linked to the meanings on each card (similar to the Rider Waite deck) but the art style is very Modern, almost cartoonish. I find it very comfortable to use, but I've never seen another like it, in size or art style.

Edit: found it on Amazon, if you want to see/buy it: Running Press Tarot

u/r12ski · 1 pointr/rocketry

Make: High-Power Rockets: Construction and Certification for Thousands of Feet and Beyond https://www.amazon.com/dp/1457182971/ref=cm_sw_r_cp_api_HwOXBbN91AJZ2

u/misterthirsty · 1 pointr/buildaboat

If you want an good first project that incorporates several building techniques that are used in boat-building but not-so-common in traditional construction, check out either the 6 hour canoe (amazon) of the Bevin's Skiff (asf.org). Both boats are great in the water, use very similar build techniques, and don't require many tools.

BTW, what is your current tool inventory? The Bevin's Skiff can be bought as a kit that requires only basic tools, yet provides more boat-building techniques than a stitch and glue boat.

u/koalityfellatio · 1 pointr/tipofmytongue

Sorry that's not it, but i think it lead to what i was actually looking for!

I'm pretty sure I was thinking of the Wisdom and Know How series.

Thanks for the help anyway!

u/ALexusOhHaiNyan · 1 pointr/conspiratard

If I may, I'd like to take a different tack here as there's more than enough detailed debunking already listed.

For me it's less outer debate and rather inner work if you will. In other words - " Thinking about your thinking" will get one far more out of disseminating conspiracy theories than the actual debates themselves. Because that's the ultimate problem here - the thinking. As Chomsky urges the questioner to do more of in the link above.

If any word came close to understanding a conspiracy theorist it might be this...

"Control Freak"

Because the capital 'T' truth is this - ...the world is rudderless. Nobody is in control...

But that's terrifying. Especially to those who like things organized. Which many men do, especially nerdy men. And that's why most conspiracty theorists are so predominantly men aged 18 -35. That's part of their struggle - how to temper this need for control with a chaotic world - but that's a subject explored best in art, poetry. wise philosophy, psychology and most likely good comedy. And it's most definitely worth asking why the the gender attributed with 'womens intuition' - aka 'understanding people' - doesn't concern themselves at all with conspiracy theory. It betrays a commonly limited understanding of human nature that many males, especially immature ones have.

These individuals. Often smart, possibly improperly or under-educated, but with the sufficient intelligence (and free time) to occupy themselves with such thing. At worst they are "rudderless nerds" like an american muscle car with more power than steering - that comes with a proper education and critical thinking that college forces on you wether you like it or not. Some more than others.

With that being said the most common factor they all share is their need to organize, explain, and control a chaotic world.

Lastly. If I were to offer my own take on "why things suck" I would offer that Psychopathy is why things are the way they are and that there is far less cooperation amongst power than competition - be it corporations, media, governance or education. Nobody is solely in power but they're all vying for it, and we're all just stuck in between.

Beware The Psychopath My Son by Clinton Callahan

So in that sense I would argue that a book on developing critical thinking skills, self actualization, and thinking about ones thinking will do far more to help your friend than any one de-bunking video.

Because the problem isn't that there is a vast conspiracy, it's that he's thinking is undisciplined and down right shitty at times. Work on solving
that* problem and familiarizing oneself with the pitfalls of bad thinking...

http://youarenotsosmart.com/2010/06/23/confirmation-bias/

Because that's the bigger, and harder one standing in the way of his future.

u/bitfriend · 1 pointr/space

Start here, and try out Kerbal Space Program If you want to go further (as in get a real rocketry-related job) realize that you'll need to specialize in something (structural engineering, fuel chemistry, electronic telecommunications, etc) to get a job.