Best water softeners according to redditors
We found 43 Reddit comments discussing the best water softeners. We ranked the 27 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 43 Reddit comments discussing the best water softeners. We ranked the 27 resulting products by number of redditors who mentioned them. Here are the top 20.
You can add a filter to your main water line that filters for the whole house, usually restaurants/big companys use them but they are not that expensive just require filter being changed more often as more water is being used/needs to be filtered. https://www.amazon.com/Pentair-5600sxt-48k-10-Softener-Upgraded-Capacity/dp/B00YFOTWZG?ref_=fsclp_pl_dp_1
Oh thats nothing, wait till you see this.
https://www.amazon.com/Natural-Action-Technologies-Dynamically-Structured/dp/B00MPDBPK4
It's a Nikken Magna-Charger
>The Nikken Magna-Charger has powerful neodymium and ferrite magnets that reduce mineral clumping, acting as a natural water softener without adding chemicals or salt. It decreases buildup inside pipes and may help prolong plumbing life
Looks like they sold for roughly $150
I’ve heard the crystals are best. There are also pellets and the big blocks. I use the crystals and then once a month I put in resin cleaner.
(Package Of 2) Pro Products RK41N Pro Res Care Resin Cleaning Solution (1 Bot... https://www.amazon.com/dp/B00FKFMVVG/ref=cm_sw_r_cp_tai_5KcYCb7K2DP88
Scam
I looked at the product and immediately thought scam...ten I saw that there were over 200 reviews and most were positive and then I thought "Could it really work?"
I read the reviews. All of the positive ones were very well written, they were very specific (ex purchased on February 12, 2017 or my gpg is 197) and most contained photos...hmmm.
The reviews on Amazon are VERY different from the HD reviews https://www.amazon.com/ScaleBlaster-SB-175-Water-Conditioning-System/dp/B0089FLDWM
Scam 100%
Like this one? https://www.amazon.es/Descalcificador-descalcificadores-Water2Buy-Elimina-derivaci%C3%B3n/dp/B009SOYMTE/ref=sr_1_1?ie=UTF8&qid=1502895019&sr=8-1&keywords=water+softener
check my edits that I was making probably while you were replying. If the filter is hanging off there as well, then you most likely have all the parts screwed onto to that connection awaiting your use. You just need to unscrew them, assemble them in order on your tubing as I described (adding in the filter in between where shown int he diagram).
I just caught you that you said you don't have that male union. If that is truly the case, this is a special part called a BLFC (Brine Line Flow Control). Appears just like a union, but has a special insert for Flow Control. You can get BLFC for the more common Fleck control valves, but you need to contact your supplier as the insert is specific for your filter.
​
EDIT: appears Hankcraft duplicated the design of a Flek 5600, and the parts are interchangeable. If so, here is your part that you said you are missing:
https://www.amazon.com/AFWFilters-FP-13244-Brine-Fitting-Softener/dp/B07NJCFNTB
source of claim parts are 90% interchangeable:
https://www.softenerparts.com/kb_results.asp?ID=231
I think there are a couple of questions you should ask yourself first.
If you are using the Sawyer Squeeze, you could use something like 3L CNOC bags (the thread on top matches the Squeeze, unlike other bags), and the 3L CNOC bag is 3.7oz each ($23 https://www.amazon.com/Cnoc-Outdoors-Vecto-Container-Orange/dp/B07F1BBWHC). Good lightweight construction. If you plan to use Aquatabs, Aquamira, or bleach, you could use something even more lightweight like the Platypus 2L bags at 1.3oz each ($9 https://www.amazon.com/Platypus-2-Liter-Ultralight-Collapsible-Bottle/dp/B000J2KEGY/). Those do not match the Squeeze threads, but if you're not using Squeeze anyway it wouldn't matter. Both the CNOC and Platypus bags roll down to nothing when empty, and are easy to travel with. You could carry 2 of the CNOC or Platypus bags + 2 1L Smartwater bottles (again, the threading on these matches Sawyer Squeeze) for a total of 6-8oz, without using that much space, and without costing that much money. Just remember that water itself is pretty heavy, which is why most people try to camel up and drink a lot at water stops, and then not have to carry as much all day.
They are nice, but they are grossly overcharging you:
https://www.amazon.com/Aquasana-6-Year-Gallon-Whole-Filter/dp/B00XAJKA4E
It sounds like you need a softener. The fleck ones are popular. A softener would help with the problems you described. https://www.amazon.com/gp/aw/d/B00OGN3162/
You should test again though and confirm.
The first thing you posted is basically 2 big blues but way more money. https://www.amazon.com/gp/aw/d/B0014C3IOS/
Both things you posted are housings. The second one is basically a single housing that has multiple filters where as the first one is 2 housings which would each have a filter each. Most likely 1 particulate, 1 carbon. They would both more or less do the same thing
That being said it sounds like you need the softener not the filter.
I have a Kinetico Sulfurguard system with Fleck water softener. The water softener I bought on Amazon and installed myself which is very easy. Kinetico only sells and services through their dealers. My drinking water is better than the city or county. This is the best setup Ive found.
https://www.kinetico.com/specialty-solutions/sulfur-guard-backwashing-filter/
https://www.amazon.com/dp/B00OGN3162/ref=cm_sw_r_cp_apa_i_uGqCDbP3RQG4Z
Edit,...the kinetico is a hydrogen peroxide system
You look to have really good well water. Low iron is always a plus. I have one of these, works great.
Fleck 5600SXT 48,000 Grain Water Softener Digital SXT Metered Whole House System https://www.amazon.com/dp/B00OGN3162/ref=cm_sw_r_cp_apa_i_oQkuDb0VQ1ATM
Adding a filter before for sediment will help work the softener lasting longer. I have some spin down filters (you just clean the screen and reuse them) and traditional water filters that I change every couple months.
Also have this RO at the kitchen sink. Replacement filters are very reasonable, 2 sets of 3 for around $50 I think.
APEC Top Tier 5-Stage Ultra Safe Reverse Osmosis Drinking Water Filter System (ESSENCE ROES-50) https://www.amazon.com/dp/B00I0ZGOZM/ref=cm_sw_r_cp_apa_i_5SkuDbSZ9M7QN
http://www.amazon.com/ScaleBlaster-SB-75-Water-Conditioning-System/dp/B00K80MWVM
Also in Home Depot / Lowes
Naja, dann brauchst du Zugang und Erlaubnis deines Vermieters. Und dann musst du dir überlegen, ob sich so eine Anlage rentiert:
https://www.amazon.de/Wasserenth%C3%A4rter-w2b800-durch-Water2buy-Softeners-Franz%C3%B6sischen/dp/B007ZC37II?SubscriptionId=AKIAIXP4FQX3UT65YDYQ&tag=wassrhtprodktpage-21&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B007ZC37II
Die wird auch nur zwischengeschalten und regelmäßig mit Salz nachgefüllt.
Can you at least access the incoming water main, like where a cutoff valve might be? Sometimes in apartments they are in a closet and/or near the water heater.
If so then this would do the trick:
Eddy Electronic Water Descaler - Water Softener Alternative
https://www.amazon.com/dp/B003Z96GR4/ref=cm_sw_r_cp_tai_URY2Db6QNSSC1
>I’ll just say I don’t think determining if something works or not can be measured by whether or not builders include them in new constructions.
If they worked, why wouldn't they be used in place of real water softeners that use the well-established chemistry of ion exchange.
After all, these electronic gizmos are cheaper, easier to install, and have no routine maintenance required.
When they first hit the market ~20 years ago, they were called "electronic water softeners". The FTC came down on that term, so they've rebranded themselves as "electronic water conditioners" or "electronic water descalers". The revised claim is that they change the "shape" of magnesium/calcium salts so they won't bind surfaces.
My house came with one (installed by the previous owner). I left it running till it died about 2 years ago. When it died, I looked into replacing it, but didn't follow through. And surprise, surprise - there's zero difference in how my dishes dry, or the scale in fixtures. So, it's big fucking placebo effect.
P.S. This is the one my house came with:
https://www.amazon.com/Clearwave-46100000-Field-CW-125-WHITE/dp/B00795B9IQ
has anyone used some like this?
it seems doable for the price and how easy it looks to install. im skeptical, but i also understand I have a hard time grasping electrical knowledge.
Reminds me of this thing
https://www.amazon.com/dp/B01JEYL7AO
I'm in the desert so can't say anything to colder climates. Typically they break down due to scale buildup which can be remedied with a descaler, ie something like this at the input line. Like with anything follow the reviews. There should be a unit that works for your climate and the number of people in your house. If you only run one shower at a time then a big tank seems overkill, to me anyway, and some of these units can provide enough for two showers and two sinks at the same time.
However, living in MN definitely drops a wrench in the idea. You may just be better off sticking with a tank.
Yeah, I'm thinking the furnace is probably a no-brainer. Not sure about unexpected costs that might spring up along the way, or if I'm being unreasonable in expecting it to cost in that range; probably the best answer is to get an estimate so I know.
The filtration system (like this) I'm also unsure about whether it could be reused, and that's a big part of the question. If anybody knows which of these might be reusable for new construction I'd appreciate the insight.
Insulation, like the furnace, is what makes these questions so gray. The timeline is right on the edge between making these things obvious money-saving things or being worth that many years of comfort and being a frivolous waste of time when we could be spending the money on the new house.
> Savings tip: calculate your spendings in reflection to your savings/month. let's say you can save 500,- a month towards the new house; an expense of 6k now adds a year to your expected moving day.
This is a great way of looking at it. Thanks for that.
http://www.amazon.com/Fleck-5600SXT-softener-digitial-metered/dp/B004GEFKN8
That exact setup, but I got it from another website for a little less and I got to choose the resin tanka and brine thank size. I don't remember the website though
Do you recommend one other then this Fleck? https://www.amazon.com/Fleck-5600SXT-Softener-Digital-Metered/dp/B004GEFKN8/ref=sr_1_4?s=kitchen-bath&ie=UTF8&qid=1478113584&sr=1-4&keywords=water+softener
Also, since I already ordered the unit (which is obviously bulky), could I just replace the valve and not the tank?
I ordered the Fleck 56000SXT 48,000 grain
It seems like some de-ionization resins are rechargable (ex: this one) by putting them in a salt water bath occasionally (weekly?). They dont last forever but you might get a year out of it. I think something like this plus using brita filtered water should prevent the vast majority of scale from accumulating.
I'm thinking of this one from Fleck. Any big differences between it and what I have now?
Fleck
https://www.amazon.com/gp/aw/d/B004GEFKN8?vs=1
Kenmore
http://m.sears.com/kenmore-extra-high-efficiency-water-softener/p-04238350000P
It needs to be replaced, because you can not trust it anymore. Even if you got it working again, it will screw up later on down the road.
https://www.amazon.com/Fleck-Timer-Filter-Backwash-filter/dp/B004N8VLNK
https://www.ebay.com/itm/Flotrol-Whole-House-Timer-Backwash-Filter-Valve/283199216719
You could convert to a manual valve, but you'd have to remember to go out and actually do it on a regular schedule.
This is only $200, can be installed by anyone, and will stop calcium and lime from depositing on your pipes or appliances. It won't help with rust but that doesn't look to be a problem for OP.