Top products from r/3dprinters
We found 8 product mentions on r/3dprinters. We ranked the 8 resulting products by number of redditors who mentioned them. Here are the top 20.
1. IWISS Crimping Tools Works on Mini Connectors XH2.54mm XH3.96mm Dupont D-Sub Terminals JST Pin Crimper SN-01BM Crimping Tools for Crimper Plier for AWG 28-20 （0.08-0.5mm2)
Sentiment score: 1
Number of reviews: 1
Capacity of AWG28-20 ( 0.08-0.5mm2)PRECISE PRESS LINE: Wire-electrode cutting jaw ensure a high-precise crimping result.LABOR-SAVING,COMFORTABLE,DURABLE: ergonomically designed for terminal crimping, labor saving 50%, comfortable grip,durable, firm and easy to useRatchet type pressure line clamp com...
Show Reddit reviews2. Monoprice Select Mini 3D Printer v2 - White With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models
Sentiment score: 1
Number of reviews: 1
Support for All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA.Supported ...
Show Reddit reviews3. WAHHING 10PCS 2mm thick Heater block cotton Safe Working Temp less 300°C For 3D printer Hotend
Sentiment score: 0
Number of reviews: 1
★Recommend Safe Working Temperature : ＜300°C★You can Punch Holes or Cut fit size to the cotton.Heat preservation, keep heater block and consumable work better.Size: 3.35in/85mm x 0.8in/20mm x 0.08in/2mm (+/-0.05in)Package: 10 pcs * WAHHING heater block cottons.
Show Reddit reviews4. XLX 1220Pcs 2.54mm 2 3 4 5 6 7 8 9 Pin housing (and Pin Pedestal Housing) Kit and Male / Female Pin Header Terminals Connector Adapter Plug Set Compatible with JST XHP
Sentiment score: 1
Number of reviews: 1
1.Pin Pitch : 2.54mm2.Material : PVC , Metal3. Pin : 2 / 3 / 4 / 5 / 6 / 7 / 8 / 94. Quantity : 1220pcs with plastic box5. Type : Compatible with JST-XHP
Show Reddit reviews5. HONG111 9pcs GT2 5mm Bore Aluminum Toothless Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt
Sentiment score: -1
Number of reviews: 1
Bore Diameter: 5mmNet Weight: 3g/pcsToothless timing blet pulley, use with 16T 3mm bore idler pulleyUse for GT2 6mm Wide Timing Belt100% Brand new and high quality!!
Show Reddit reviews6. Iverntech MGN12 300mm 400mm 450mm 700mm Linear Rail Guide with MGN12H Carriage Block for 3D Printer and CNC Parts
Sentiment score: 1
Number of reviews: 1
Model: MGN12 miniature rail guideBlock: MGN12H carriageWe have tested each item by hands, all works good
Show Reddit reviews7. BALITENSEN 2Pcs Smooth GT2 Idler Pulley 20 Teeth Bore 5mm Perlin Passive Pulley Toothless 20 Geer 2GT Idle Pulley for 10mm Wide Belt CNC 3D Printer
Sentiment score: -1
Number of reviews: 1
Show Reddit reviews8. ANYCUBIC MEGA I3 3D Printer with Patented Heat Bed and Free 1kg PLA Filament, Works with PLA/Hips/Wood etc
Sentiment score: 1
Number of reviews: 1
【Fast Assembly】: Mega i3 3D printer came in two modules and all it takes is 8 screws and 3 cables to plug in, easy to assemble and get printing right out of the box; Perfect choice for beginners. Kindly note: not workable with ABS.【Easy Leveling】: This 3d printer is equipped with dual Z limi...
Show Reddit reviews
It is a JST connector
Im not sure of the size however
I have this kit
https://www.amazon.com/gp/product/B01M5FIDT9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
that fits all the control board connections but they are too big for the connections on the stepper motors them selves and too small for the one on the heated bed,
I ditched the connector on the bed any way and directly soldered some super flex 12awg wire to the bed and crimped prong connectors on the other side that connect to the mosfet.
That would be your best bet to avoid THAT again
You will need a JST crimping tool as well.
JST Crimping tool: https://www.amazon.com/Iwiss-XH2-54mm-Terminals-SN-01BM-0-08-0-5mm2/dp/B00YGLKBSK/ref=sr_1_1?ie=UTF8&qid=1491418309&sr=8-1&keywords=JST+Crimping+tool
How to Crimp JST Pins: https://www.youtube.com/watch?v=c-pTsccCizA
I have a MP Mini V2 and its a decent machine, just has a smaller build plate.
I also have a Anycubic I3 Mega that has been a great machine.
I’ve used a couple of the other monoprice printers, but that’s it. These have been great out-of-the-box printers for me, but they are limited by your knowledge and willingness to spend time to dial them in for anything other than PLA. I struggled trying to get my I3 running PETG, but ultimately didn’t have the patience so I’m back on PLA. Going to give it another shot soon since I know it can do it.
https://www.amazon.com/Iverntech-Linear-MGN12H-Carriage-Printer/dp/B076337N16
This is the system my printer uses (printrbot metal plus) and it is extremely sturdy. Definitely would recommend, if you do get a cheaper, non name brand you may have to replace the bearings with high quality ones.
There's some on amazon, 10 pack for $8, if you prefer to use Amazon for things.
The White parts are two nylon/derlin spacers. You can find these at homedepot locally but shouldn't need replacing.
Take it apart, turn the bearing, is it damaged or can you just oil it? If this doesnt fix it then either replace the bearing (long wait time from china) or buy the right size. It's more than likely a 10mm long GT2 smooth pulley
10mm Thick Version
https://www.amazon.com/BALITENSEN-Smooth-Passive-Toothless-Printer/dp/B079DMNDBQ
6mm Thick Version
https://www.amazon.com/dp/B071KK6Z8X/
Measure the thickness, and the bore size.