Top products from r/Bowling
We found 58 product mentions on r/Bowling. We ranked the 185 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Bowling: How to Master the Game
Sentiment score: 2
Number of reviews: 4
Used Book in Good Condition
2. Ebonite Ultra Fit Tool with 5/8-Inch Blade
Sentiment score: 3
Number of reviews: 3
Fine-tunes finger and thumb holes with precisionRemoves tape and residue from finger and thumb holesQuality anodized aluminum handle
3. The Game Changer: A Simple System for Improving Your Bowling Scores
Sentiment score: 0
Number of reviews: 3
Used Book in Good Condition
4. Dexter Max Powerstep T3 Traction Sole
Sentiment score: 2
Number of reviews: 3
Compatible with Dexter SST 5, 6, 7 and 8 shoesThis is not Compatible with the Dexter SST the 9 shoesThese are cut to fit
5. Genesis Pure Pad Bowling Ball Wipe Pad
Sentiment score: 4
Number of reviews: 3
Buffalo Leather Ball Wipe Pad Make a pure shot every time with our new ball wipe padMade of durable all natural genuine Buffalo Leather, the heavy nap of the Pure Pad will effortlessly absorb dirt and oil better than any microfiber towel or shammy ever couldIt's been specifically sized to fit in the...
6. bowlingball.com Bowling Shoe Slider (Black)
Sentiment score: 2
Number of reviews: 3
Slips on over the sliding sole of the bowling shoe to increase sliding abilityPerfect for synthetic approaches, high humidity areas or anywhere additional slide is neededScan-suede construction with elastic retaining bandOne size fits most, From Youth size 5 up to a Men's size 14 medium width
7. Tac Up Bowling Ball Cleaner- 8 Ounce
Sentiment score: 2
Number of reviews: 3
Package length: 5.08 cmPackage width: 5.08 cmPackage height: 18.415 cmProduct Type: SPORTING GOODS
8. Vise Three Ball Tote Roller Bowling Bag, Black
Sentiment score: 3
Number of reviews: 3
New zippered pocket flap, great for custom embroideryHeavy duty zippersReinforced stitchingCountry of Origin:China
9. KAZE SPORTS Bowling Shoe Slider (1 Pack)
Sentiment score: 0
Number of reviews: 2
10. Ebonite Heavy Duty Shoe Brush
Sentiment score: 1
Number of reviews: 2
Prevents slips and stops by keeping sole a uniform texturePlastic handleWire brush fibers
11. Storm Bowling Products Reacta Shine Bowling Ball Cleaner
Sentiment score: 0
Number of reviews: 2
Package length: 5.842 cmPackage width: 5.334 cmPackage height: 13.462 cmProduct Type: SPORTING GOODS
12. Dexter Bowling - Mens - Jack Black/White
Sentiment score: 1
Number of reviews: 2
A sporty style with twin stripes and sleek, fluid linesSoft, durable man-made upperLace to toe upper pattern for a custom fitFully fabric-lined with padded tongue and collarNon-marking rubber outsole with defined horseshoe heel
13. BSI Men's #751 Bowling Shoes, Black, Size 10
Sentiment score: 1
Number of reviews: 2
Sport leather uppersPadded tongue and collarStitched and glued slide soleLightweight EVA midsoleEmbossed logo
14. Motiv Flex Protective Performance Tape Black - Pre Cut 40 Pieces
Sentiment score: 0
Number of reviews: 2
Protects skin from blisters, cuts, and irritationsFast release speedImproves FitCountry Of Origin: China
15. Dexter Max Powerstep T3 Traction Sole , Medium/9-13
Sentiment score: 2
Number of reviews: 2
Compatible with Dexter SST 5, 6, 7 and 8 shoesThis is not Compatible with the Dexter SST the 9 shoesThese are cut to fit
16. Joby JB01325 GripTight GorillaPod Stand for Large Phones – This Smartphone Stand and Tripod Will Provide You a Multitude of Solutions
Sentiment score: 2
Number of reviews: 2
Universal smartphone compatibility for large phones: patent-pending design supports an iPhone 6, 6+, Galaxy notes, and any other large phones without a case, and most with oneCapture better perspectives: flexible, wrappable joints secure phone to objects and allow for adaptable camera positioning fo...
18. Johnson & Johnson Coach Sports Tape, 1.5 Inches By 10 Yards
Sentiment score: 0
Number of reviews: 1
Sports tape supports and protects jointsProvides support to help speed recovery after sprains and other injuriesContains natural rubber latexIdeal for taping fingers, wrists, or anklesBreathable cloth tape provides comfort
19. Triple Store Bowling Sports Game Room Wall Clock
Sentiment score: 0
Number of reviews: 1
High Quality 3D Glass LensColorful contemporary styling with Unique 3 Dimensional bowling pin ClockInnovative Vacuum PlatingSize: 10 1/2in. Dia. x 2 1/2in. DBattery Use: One AA Size (Not Included)
> Thanks for the reply! The bowlingball.com scale helps a lot when comparing different manufacturers.
Pleasure! And yes, it does. I've found it's pretty dang accurate so it's helpful for comparing apples to oranges (or C300 to Roto Grip, but you get the point haha)
EDIT I'd go with 15# if I were you. No real reason to be throwing 16# unless you just throw everything else 25mph or something lol
> Would you recommend going with a symmetric core?
Yes, I would definitely recommend a symmetric core for your first ball. It won't be as flashy as an asym, but will also be a bit easier to control and work well as a ball to build around as you expand your arsenal.
> I have looked at the Storm Rocket Ship and am considering that one but will definitely talk to the pro shop next time I go. I have a friend who has the Storm Code Black which I tossed a few times and liked; do you think that would be harder to control due to its core?
I actually had a chance to throw the Rocket Ship, Code Black, and a bunch of other stuff at a Storm/RG demo day last week (write-up is here). The RS would be a fantastic ball to get - I'd also take a look at the new Motiv Chronic Paranoia (releases today, IIRC) and the Ebonite GB2 MVP. The Code Black is an awesome ball as well, but it's a bit more specialized - it definitely has a much more violent reaction due to the polished pearl reactive coverstock and asymmetric core.
> Regarding the finish on the balls and how long they will last: I have read people saying they have had a ball "die" and stop hooking after several games. Any tips on a type of ball that would be less prone to this, or does it just require proper cleaning?
Usually it's more like several hundred games, but yeah proper maintenance is key. This is the maintenance schedule that I follow for all of my reactive gear:
Doing this, I have several hundred games on a few balls in my bag (Ebonite GB2 MVP, Track Paradox Pearl, Motiv Graffiti Tag) and they're still going strong with no signs of quitting. :)
> Without knowing much about cover stocks in general, to me it seems like a ball with a polished coat like the Code Black would be easier to clean the oil off than the matte ones, but I have been unable to find anything on that.
No, not really. If you use a dedicated ball cleaner, this isn't something to worry about.
> When shooting spares I usually get a house ball and chuck it straight at the pin. I was planning on picking up a T-Zone or Ice Storm to carry as my own spare ball for more consistency and so I could have a proper fit.
YES absolutely. 100% recommend this for anybody.
> Would you recommend getting the same drill dimensions and weight as my strike ball? I usually throw a lighter house ball because due to the finger placement on house balls I don't have as much control over the heavy ones.
Same weight, same drilling measurements, same everything. The fit & weight should be identical across everything in your bag.
> Also is plastic the way to go just to pick up straight shots or would it be worth investing in something like the Pitch Black or BTU which could posisbly be more versatile? From what I have read so far, plastic should hook less but can slide where urethane will have a nicer roll but may hook down lane.
Your assessment of plastic vs urethane is correct, and honestly comes down to personal preference. I generally recommend plastic for most bowlers.
:)
> What's the best way to clean them?
A spray cleaner like this or this would work for a basic clean up, but the balls may need a full detox and resurface at a pro shop depending on their condition. With 30 balls, I'd probably just clean them up with a spray cleaner and let the future owners have the resurface done when they plug and re-drill them. (See below)
> Anything I should check for besides cracks?
Cracks and big divots in the surface of the ball are the big ones. Minor scrapes and scratches can be worked out at the pro shop when the new owner has the ball plugged and re-drilled.
> I think they may have custom finger holes. Anything I can do about that?
If any of the balls get sold (depending on age/condition, many of them may not be worth the hassle), the new owner would need to take the balls to a local pro shop and have them fill in the holes (known as plugging) and then redrill to their hand's measurements. Nothing for you to do about that.
> I notice a lot of these balls have another hole besides the three finger holes. What is the purpose of it?
You're referring to a balance hole/weight hole. You can read more about them here.
> What's the best way to sell? eBay? Craigslist? Bowling forum?
Like anything else, take lots of pictures and try to be as detailed as possible about the specifics (brand, model, etc.) Many of the balls may not be worth anything, so it could be a diminishing rate of return. I think you can post for sale items here as long as you don't spam the boards. Might be worth checking with the mods to be sure. Craigslist would be another good option. Ebay also.
I'd love to see pictures of what you've got just out of curiosity.
You're gonna go through some ups and downs. The ups are great, but the downs can really mess you up.
Here are some tips from me:
Work on your spares. Picking up your spares make all the difference. When you can practice, use a significant amount of time on the harder spare shots (10 for a righty, 7 for lefty).
Stretch. I like to get a good stretch session out before league night. The legs, groin, chest, arm, and shoulder should all get worked over a bit before getting out there.
Get a routine. Whether it's something you do on the approach, or something you think about while standing up there. For me, I have the same routine I follow on every shot, and then I sing a song inside my head while starting my approach. Helps me to focus.
Find your mark and hit it every time. Unless you're a lucky dog and was born left handed, you will likely have to make adjustments as the game goes on, but don't let that affect you too much. Don't take your eyes off where the ball needs to go.
If you've thrown a few bad balls and you're getting heated, take a little walk. Just walk from one end of the alley and back. Try not to dwell on the last throws and just focus on the next one.
This book called "Bowling: How to Master the Game" by Parker Bohn was a very good resource for me when I first came back to the game. It gives you not only delivery and strategy, but helps with many mental aspects of the game as well. There are many tips and advice that I've used to help adapt my game. Check it out at your local library or whatever.
Finally, relax. It's just a game. Don't take it too serious. If it feels like work, then you're doing it wrong.
If it is rubbing you raw on a certain side, your PSO can also use a tool like this or a rasp to remove material from just that side. I already know any time I get a thumbhole drilled that I need a little taken out on the left side of the hole, and the saddle at the front beveled a bit. .
Since your issue is on the side of your thumb and not the back, I don't suspect it's from gripping the ball, but I have been wrong many times before on educated internet guesses.
I also like to take some really fine sandpaper (I keep strips of 2000-grit in my bag) to get the inside of the hole nice and smooth, and put a piece of grip tape (or two or five) in the front of the hole.
Given your flair, I'm guessing you're a newer bowler, it may take you some time to find your favorite fit and feel, but if you can't figure out how to get out of it cleanly enough to avoid injury, you might have your PSO watch a few shots and see if they think moving the thumbhole position or changing the pitch might help. Especially if it's your first ball, getting the thumb perfect is a challenging thing to do.
I used wet/dry 3m sandpaper in stages of grit: 220, 320, 400, 800, 1000. Each sanded by hand wet. I then dampened an Abralon 4000 grit pad and did a final resurfacing. I would have liked to use a 2000 and 3000 grit abralon, but I didn't have one. Finally, I used this ball cleaner and polish which added a nice shine to it. I am impressed with how well it came out and reacts on the lane. By hand, it took about 2 hours total.
I turned a 2500 grit/matte finish surface into a 4000 grit/polished surface.
If you drag your non slide foot the toe cap wont last long. These are basically the old Brunswick TPU-X shoe that I have. I almost went through the toe cap in like 2 months. I ruin all my bowling shoes but never anywhere this fast. I now wear the removable dexter toe cap on it since they basically look brand new except the toe guard and they are super comfortable shoes.
https://www.amazon.com/Dexter-Powerstep-Traction-Sole-Medium/dp/B004XG5NTU/ref=asc_df_B004XG5NTU/?tag=hyprod-20&linkCode=df0&hvadid=193133192523&hvpos=1o3&hvnetw=g&hvrand=14796870004048169475&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012055&hvtargid=pla-314969078801&psc=1
​
I think the 9s have a replaceable toe cap now. Big thing to consider if you burn through shoes because of toe dragging like a lot of us.
​
KR Strikeforce made the TPU-X for Brunswick and makes the Forces for Hammer. Their version is under $100. https://www.cheapbowlingballs.com/KR-Raptor-Mens-Bowling-Shoes.aspx
​
https://www.cheapbowlingballs.com/KR-Raptor-Mens-Wide-Bowling-Shoes.aspx
there are three standard outer diameter sizes for grips: 7/8", 31/32", and 1-1/32". the first and last are very rare; you have to have extremely tiny or extremely large fingers to need a grip in a size that only comes in those ODs so i wouldn't worry about it. 99% of bowlers use 31/32" grips.
the outside of the grip as well as the inside (at least on vise brand grips) will have a size on them so you can figure out what you need. the inside number (if there is one) will refer to the numerator in the fractional size, i.e. if it's an 11/32" grip it will say "11." on the outside it will list the full fractional size (ex. 11/32"), outer diameter (ex. 31/32"), as well as another number (ex. 4.5) that is intended to make buying grips easier/more convenient by making sizes go up in 0.5 increments from -1 so you don't have to remember the fractional size. in this handy chart it is referred to as "equivalent" and it is the same across all brands. i would just worry about the fractional size because you don't have to translate that to another numbering scheme; the size is the size.
because your PSO is so far away, i would recommend learning how to remove and install grips yourself. you will need a grip puller and glue. a work-out tool isn't completely necessary but i would recommend it for removing any remains from the grip left on the inside of the hole so that the next grip you put in fits true instead of being slightly more snug than it should be. a grip puller makes removing grips super simple and straightforward. for glue i suggest loctite ultra gel control. it will stay where you put it instead of running all over the place which makes mistakes less annoying and lets you be more precise. it also gives you a little more time to make any last-second corrections in grip orientation due to its slightly longer setting time.
hope this helps.
https://www.amazon.com/Salmon-Creek-NuBall-Bowling-Rejuvenator/dp/B00BCQ0YG6
I have one and swear by it. It's amazing and an awesome investment. Much better than other homemade alternatives IMO.
I can second this. I bought the one that akimbojimo229 recommended and was amazed at how well it pulls the oil off the ball. Almost like a sponge. https://www.amazon.com/Genesis-Pure-Bowling-Ball-Wipe/dp/B014YVXW00/ref=sr_1_36?dchild=1&keywords=leather+shammy&link_code=qs&qid=1570196315&sourceid=Mozilla-search&sr=8-36
So there are ways to go about this. Amazon is a very good friend. Idk if there is a better deal but.
New shoes will take some getting used to. If you look at the bottom of rental shoes they are (almost always) entirely leather except for the heel. Most bowling shoes the slide portion is only on the sole of the foot ending just past the balls of your feet.
So if you learned to slide more whole-footed with rental shoes then you will get that catching feeling with your new shoes. You'll probably need to learn to slide more on your toes and ball of your foot.
An option that may help is a shoe slide. I've been bowling with a shoe slide because my shoes are too tacky. The shoe slide tends to cover more of the shoe and might help you not to catch. Though it may not help in the long run to become reliant on a shoe slide.
https://www.amazon.com/bowlingball-com-Shoe-Slider/dp/B004KQ75ZS/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1510862214&sr=1-1&keywords=shoe+slide
I have this one, works great for my Galaxy S7.
https://www.amazon.com/gp/product/B00M9C9EVS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
BSI makes some really good looking bowling shoes that I was looking at. There are also some more flamboyant ones if that's the way you get down.
I also drag my brake toe. This SST8 sole protects the toe of the shoe from wear and is definitely not coming off unless you want it off. http://www.amazon.com/Dexter-Max-Powerstep-Traction-Sole/dp/B009GDHBIQ
Side effect, it looks goofy.
I would look at Dexter's, been in the bowling shoe business forever.
This is a very common first shoe here in the states. Affordable, decent slide, and comfortable.
https://www.amazon.com/gp/aw/d/B003TOSP2Y/ref=mp_s_a_1_7?ie=UTF8&qid=1497315015&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=bowling%2Bshoes&dpPl=1&dpID=51qGS6jCgWL&ref=plSrch&th=1&psc=1
Later if you're looking to up your game with changeable soles, look at Dexter's 9s or the Brunswick tpu x.
Pyramid apparently has one: https://www.amazon.com/gp/product/B07TVFNV9Z?pf_rd_p=183f5289-9dc0-416f-942e-e8f213ef368b&pf_rd_r=4ERVYZC7XHR0R48NV4R8
Also since you seem relatively unfamiliar with buying bowling balls: balls generally come undrilled so no need to look for a black market haha!
Gamechanger by Mark Baker. A book that really changed my game. Really explains technique and how to become a really good bowler.
http://www.amazon.com/The-Game-Changer-improving-bowling/dp/1604947748/ref=sr_1_1?ie=UTF8&qid=1394823546&sr=8-1&keywords=game+changer+mark+baker
How to Master the Game by Parker Bohn III is a good one. My brother taught himself the game with that book.
http://www.amazon.com/Bowling-Master-Parker-Bohn-III/dp/0789304945
Yes, in a ball oven (not in the oven in the kitchen)
Ball Oven example
It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!
Here is link number 1 - Previous text "BSI"
----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete
I suggest trying one of these to develop your slide. Your knee will thank you later.
https://www.amazon.com/bowlingball-com-Shoe-Slider/dp/B004KQ75ZS/ref=sr_1_2?ie=UTF8&qid=1493157579&sr=8-2&keywords=shoe+slide
General athletic tape. I use stuff I buy at Wal Mart for like ~$2-$3 a roll.
Here's what I get.
Repetition first. Try to take your mind off the actual stroke and let your body remember the motion. Don't try to increase speed or rotation with force. You're paying quite a bit for the ball. Let it do its job.
You could add triceps curls, dips, shoulder shrugs, crunches, and practice your drawback with your ball. The muscle building will stabilize that form for consistent releases.
I learned a bunch of this from Parker Bohn's book . I recommend it for its descriptions of the mechanics and mentality of bowling.
Bowling: How to Master the Game https://www.amazon.com/dp/0789304945/ref=cm_sw_r_cp_api_IgZXzbAKF5CGA
Not so much history...
The Game Changer
I've looked for them on Amazon.fr, and they are in stock !
Can you tell me if you spot a difference between https://www.amazon.fr/Dexter-Chaussures-bowling-homme-Blanc/dp/B003TOSP2Y/ref=sr_1_1?ie=UTF8&qid=1497315375&sr=8-1&keywords=dexter%2Bjack&th=1&psc=1 and https://www.amazon.fr/Dexter-Bowling-Shoes-Black-White/dp/B0155RIBIA/ref=sr_1_75?s=sports&ie=UTF8&qid=1497315506&sr=1-75, since one is €87 and the other €150 and both are labelled as "new" ?
What if I were to get the dexter jack and put one of these on my shoes?
Awfully common background image
So rubbing alcohol is a decent cleaner, people have been using it for a long time. The only thing is that it is not designed as a de-greaser and has a bit of trouble picking up the oil. It would be better than no cleaning at all but IMO not quite as good as a specific bowling cleaner.
My recommendation would be tac up
I have this:
http://www.amazon.com/Vise-Three-Roller-Bowling-Black/dp/B00EREJE9I/
You can add a shoe bag (that clips on to the roller tote) for about $25.
IMO you won't find anything better.
https://www.amazon.com/Dexter-Max-Powerstep-Traction-Sole/dp/B009GDHBIQ
get that. i destroyed the sole on my tpux and that's basically solved everything.
A link for the lazy, Amazon claims it's not released for sale yet. They are taking pre-sale orders however
Amazon Link
Appears to be released on May 15, 2012.
I was developing a callus on the back of my thumb from it rubbing because I was gripping a little too much and started using [tape](http://www.Motiv.com/ Flex Protective Performance Tape Black - Pre Cut 40 Pieces https://www.amazon.com/dp/B01KP41V2G/ref=cm_sw_r_cp_apa_i_wSyoDbJQ7863T) on the area and it's helped tremendously.
The other thing I have found in my own experience and wether it's a mental thing in my head or not with thumb slugs, but any colors other than black or white feel rough on my thumb and irritates it and increases swelling. I have no proof if the color matters, but it seemed to for me and is why I went to switch grip insert.