Top products from r/CalamariRaceTeam

Best bang for the buck? Cheap Amazon bar ends for $10. Here. Same exact ones that they sell at my local bike shop for $90. I mount them under my bars like this.

This particular pair takes a little while to ship, so I usually order two because I break/lose them a lot. Cheapo is the way to go.

http://www.amazon.com/gp/product/B002GTKAHQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

10 bucks, look great. i bought 2 pairs in case one of the breaks haha.

Yea I bought these. The trick is to make sure you twist them first prior to putting in your ear, this allows the earplug to go deep into your ear and expand to block out the noise.

It makes riding my motorcycle 100x more enjoyable honestly.

Dango Design Gripper Mount for GoPro https://www.amazon.com/dp/B01BBAW028/ref=cm_sw_r_cp_apa_i_b1pYDbPMPGQ1X

I have one that I use on my rpha 10 helmet, works well and I love it. It does kinda have a weight effect on your helmet tho

I have a drz with a mirror in the same spot. What you do is buy THESE. Take the bar end piece out and you have a mirror that can be mounted on the skinny part of your bars. Honestly the view from them is pretty shit and you cant really adjust em much, but I did it mainly for the look and its still good enough to see if there is something behind you

Cramp buster isn't a throttle lock, it won't hold the throttle open when you move your hand. It's supposed to rest on the heel of your hand to hold open the throttle. THIS is about the hokiest throttle lock I'd use.

Ive had success with this spray but it comes off fairly easily.

My next project is to install a servo to a switch on the bars that just flips the plates up when going through them.

This is the mount you're looking for. I have one, it's the shit.

https://www.amazon.com/Dango-Design-Gripper-Mount-GoPro/dp/B01BBAW028/ref=sr_1_2?keywords=DANGO+GOPRO+CHIN+MOUNT&qid=1573475624&sr=8-2

http://www.amazon.com/gp/aw/d/B00ERXG4TM?cache=9be59cb0101eb1a2523cb05073f1c93b&pi=SX200_QL40&qid=1409021355&sr=8-1#ref=mp_s_a_1_1

Makes long trips way better.

Wash the bike so it's spotless, then spray it down with Maxima SC1. It'll shine and smell amazing, no way she could possibly object.

Now, invest in a helmet mount

Mounting helmet on top is ok. Get annoying at highway speeds as it wants to pull your head back

Mounting on side looks better (the video itself) , but leaves your helmet unbalanced.

Mounting on nose of motocross helmet seems to be the ticket.

If you want to talk, get a mic. I use this one.

https://www.amazon.com/gp/product/B005J43I56/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Nah you want this if you have a FZ or something with similar style handlebar clamps. It looks like this on the bike

http://www.campidiot.net/dump/photo/FZ09Mount1.jpg

I used this for my stuff. But its thin, so itd be a pain for tracing a decal out.

There are 2 inch versions that would be easier to use. Finding the color you want might be hard. Example 1, Example 2

It looks like plain electrical tape until you shine a light on it when its dark.

Oh totally worth it. that one was $30 and its made of metal so its pretty sturdy too.

Amazon sells the T-shirt


https://www.amazon.com/Smaller-Bigger-Funny-Motorcycle-T-Shirt/dp/B07Z4CPR2K/ref=sr_1_fkmr0_1?dchild=1&keywords=the+smaller+the+CC+the+bigger+the+PP&psc=1&qid=1571936083&sr=8-1-fkmr0

Tending 4 at once is not cheap but Dealerships do it all the time. http://www.amazon.com/Battery-Tender-022-0148-DL-WH-12-Volt-Management/dp/B000CIPHUI

They even have 5 and 6 bank tenders.

Here are the ones I use.

Also, check this out man. Tight areas of the muscles around the neck can cause tinnitus, earache, migraines, painful jaw, etc. Consider getting these treated. Relief is immediate. I'm getting it done very soon. Let me know if you want some links with info, and I can find a place for you too!

Insurance covers it as physcial therapy.

https://www.amazon.com/dp/B01BBAW028/ref=cm_sw_r_sms_apa_i_bOvYDbVWRMVSY

Bam! https://www.amazon.com/dp/B00V54CLNO/ref=cm_sw_r_apa_Og.qxbJ6KYP2P

Amazon link

I use one of these. Lets me put the mount off to the side and wrap around to the front.

Bought here and took about 20 mins of some steady Xacto knife skills

[i got this]{http://www.amazon.com/gp/aw/d/B006563RRQ/ref=redir_mdp_mobile/176-1753381-7021463}

Here is the desktop version of your link

Center mount using the handlebar clamp mount

It's not. It's the standard helmet mount
https://www.amazon.com/GoPro-AHFMT-001-Helmet-Front-Mount/dp/B004536LUG

It's just angled back all the way

http://www.amazon.com/BIC-BICWOFQDP1WHI-Bic-Correction-Fluids/dp/B000LNSHSS/ref=sr_1_14?s=office-products&ie=UTF8&qid=1463096849&sr=1-14&keywords=white+out

That has might eat up that plastic. Or add chemicals to your gas. I don't know but I picked up one of these.
Laken Fuel 1-Liter Bottle https://www.amazon.com/dp/B000AR7BY6/ref=cm_sw_r_cp_api_rjpLxb0VHH1H4)

I'm sure actual plastic specific fog shit exists put i just used fog x and I haven't had a problem in ~2 years.

Here you go. Buy a used mount it's stupid cheaper that way. It just clips in and clips out. I leave the little puck connector on when I don't bring my cam which sucks since it blocks my chin vent from opening on that particular lid. But the alternative is to replace the tape/mount every time. Crap on that.

Here. You're welcome.

Let me get a pic of that man! I've always wanted to make my 6 into a fighter but I know it'll kill the resale seeing as everyone will just think it's crashed. Maybe I should just go crash it to get it over with.