(Part 2) Top products from r/Challenger
We found 23 product mentions on r/Challenger. We ranked the 92 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. Eastfly Never Fade Car Door LED Logo for Dodge Challenger Projector Ghost Shadow Lights, Entry Welcome Lamp Logo Light, LED Courtesy Step Lights Ground Lamp (1. Scat Pack Emblem for Challenger)
Sentiment score: 1
Number of reviews: 1
High Definition PC Lamp Head ----High-transmittance three-layer combination lamp, triple filter, energy saving, environmental protection and high efficiency; High-quality glass projection material, not film material, the projection will never fadeHigh temperature resistance Flame-retardant shell----...
22. ARKON APGN-VSM Vehicle Specific Mount Adapter Plate Connects 4 Hole AMPS VSM to Garmin Nuvi 17mm
Sentiment score: 0
Number of reviews: 1
Easy to installConnects to Vehicle Specific MountsDirectly compatible with Garmin NuviPackage weight: 1.0 lbs
23. California Car Duster 62442 Standard Car Duster with Wooden Handle
Sentiment score: 0
Number of reviews: 1
Won't scratch finishDon't just move dust--remove itNo need to use spray waxes, etcEffectively "lifts" dust with one passSafe and non-toxic
24. Cruiser Accessories 78410 Suction Cups License Plate Frame Accessory, Clear (4) Pack
Sentiment score: 0
Number of reviews: 1
These multi-purpose suction cups are designed for use with novelty plates to help keep the novelty/license plate secureMade of durable, clear plasticVersatile usesIncludes four (4) clear suction cupsUser friendly and easy to install, see back of package for installation instructionsMulti-purpose acc...
25. 3M Adhesive Remover, Helps Remove Tar, Attachment Tape & Bumper Sticker Adhesive, 12 oz., 1 aerosol
Sentiment score: 1
Number of reviews: 1
Adhesive Tar and Wax Remover quickly removes wax, grease, oil and adhesive residueIt will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces
26. Autoloc WC1000 One Touch Up and Down Window Unit
Sentiment score: 0
Number of reviews: 1
One direction operationCompatible with any window systemWorks off factory window switchesLoad sensor, auto stop, may be used with any remoteMicroprocessor controlled and works with alarms
27. VHT SP999 Nite-Shades Lens Cover Tint Translucent Black Paint Can - 10 oz.
Sentiment score: 0
Number of reviews: 1
Nite shades is a transparent black tail light lens coatingLight lens coating for creating custom European stylingBlack until they are lit, then the natural red color appearsRecommended for off-road use onlyThis item is not for sale in Catalina Island
28. TEKTON 14191 3/8-Inch Drive by 10 mm Deep Socket, Cr-V, 6-Point
Sentiment score: 0
Number of reviews: 1
6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slippingAdvanced design grips flat sides of fastener heads, not corners, to prevent round offExtra-deep broach reaches over long, threaded shafts to access nutsDetent notches in drive end lock onto ratchets and ext...
29. Hurst 5380402 Black Comp Stick Kit for Dodge Challenger RT
Sentiment score: 0
Number of reviews: 1
CNC machined console plateStainless steel Hurst engraved handleSold as a kitDurable; Hurst quality
30. Chemical Guys Leather Cleaner and Conditioner Complete Leather Care Kit (16 Oz) (2 Items)
Sentiment score: 1
Number of reviews: 1
It’s not just for car seats & interiors: This kit works on all things leather, seats, interiors, jackets, shoes, sneakers, boots, sofas and more; Everyone has something leather in their home.Treat your leather like your hair & skin: We all wash our skin and hair on a regular basis, and use conditi...
31. Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz)
Sentiment score: 0
Number of reviews: 1
This can remove many moderate to heavy surface imperfections.Works on all colorsWorks like a compound, a polish and a cleanerEliminates surface imperfectionsWax and silicone free
32. Nouvelles horrifiquement zarbies: Ésotériques, fantastiques, psychosomatiques... (French Edition)
Sentiment score: 2
Number of reviews: 1
33. Door Shox (VALET EDITION) - Car Door Protector, Car Door Guard, Car Door Protection, Door Ding Dent Protector
Sentiment score: 0
Number of reviews: 1
Helps Prevent Against Paint Scratches, Door Dings and Door DentsDurable and WeatherproofMagnetic Car Door ProtectionEasy to Attach and RemoveHeavy Duty Security Cable Prevents Theft
34. Flowmaster 842518 Super 10 Muffler 409S - 2.50 Offset IN / 2.50 Offset OUT - Aggressive Sound,Black
Sentiment score: 1
Number of reviews: 1
Super 10 seriesSuper aggressive sound level409 stainless steel constructionDelta Flow technology for maximum scavenging effect
35. Clipsandfasteners Inc 25 1/4" Nylon Blind Rivets 5/32"-13/32" Grip
Sentiment score: 2
Number of reviews: 1
GM, Ford & Chry.Diameter: 1/4"Grip: 5/32 - 13/32Nylon Blind RivetsBlack
36. Chemical Guys BUFX_102_HEX5 Hex-Logic Medium-Heavy Cutting Pad, Orange (5.5 Inch Pad made for 5 Inch backing plates)
Sentiment score: 0
Number of reviews: 1
Professional grade padHex-logic laser cut surfaceFaster, easier and more accurate resultsPerfectly centered padRing is flexible, bendable and easy to wash and re-useOne pad is included in pack
37. CORSA 14529 Dual Cat-Back Exhaust System for Dodge Challenger 5.7L
Sentiment score: 1
Number of reviews: 1
Dual walled design protects against heat distortionAdorned with high definition, precision laser engraved CORSA logoCORSA Performance tip kits are designed to fit directly to CORSA exhaust systemsPremium Stainless Steel ConstructionClamp-On Tip Design
38. BOYO VTL425HD - Ultra Slim Bar-Type License Plate HD Backup Camera (Black)
Sentiment score: 0
Number of reviews: 1
Bar-Type License Plate Mount DesignSuper-Slim Zinc Metal Frame - 50 U.S. States LegalHD CMOS Image Sensor with 520 TV Lines (768 x 494)175° Wide Viewing AngleIP67 Waterproof RatingRemarkable True Color ReproductionCamera Angle Adjustment (up or down)U.S. UTILITY PATENT No. US8,432,446U.S. DESIGN PA...
39. 3M Tape Primer 94 PEN .02oz For Vinyl Di-Noc (10 PACK)
Sentiment score: 1
Number of reviews: 1
3M-24216_10PENS Primer PenUsed to promote the adhesive of 3M Tapes to many surfacesCan be applied using brush, swab, pressurized flow gun or knurled rollerTakes 5 minutes at room temperature for product to dryQuantity: 10 Pens
Great timing on the question I'm looking to treat my Demonic Red leather seats and love the matte finish. My seats generally stay clean, so a dry soft microfiber is what I have been using. I'm looking to protect and treat the leather to keep it from cracking over time, while NOT adding shine.
​
I didn't do such a good job treating my scat pack seats and after 4 years noticed the beginning of wear and creases. Not really noticeable to the normal person, but my OCD was triggered... I had been using Turtle wax blue Ice which is great 1 step for cleaning and protecting normal leather or fake leather, but not really a good regimen for protecting soft leathers.
​
I've been researching for a while and found my 2 go to brands have products that "allegedly" work really well at cleaning and conditioning without adding shine. It's really tough to find good true reviews with all the sponsored content out there. These are the 2 products I plan to order and test.
​
​
The basic process is to clean the leather with a proper leather cleaner first to remove any dirt and oils from your skin that build up over time, this can create issues with the leather even though you condition regularly. Once you have a clean surface you can then treat with conditioner, let soak in, then buff off. I'll be using my favorite microfiber towels 1 for cleaning 1 for conditioning and 1 for buffing off.
Adding in where I got everything for those interested:
This stuff is awesome! It's the RedLine Interior I used
Also, these, I went with the rear lights, reflectors and side lights and the darkest they had to go with my black/white motif.
Finally I got some sweet strobe vinyl decals on ebay and the classic challenger emblems for the sides.
Can't forget about the HellCat Intake Not sure if it adds much in terms of HP but it definitely gets the intake temp down on the freeway. You'll need this as well for it to connect to your headlight. FYI it's not very tight of a fit around the lip but I don't think it matters much. There's a few videos out there on how to install it, super easy, only took about 20 minutes. ( Note: you need a '15-'17 Challenger to do this)
bro im just going to tell you this. Do yourself a favor and get the dealership to install. This thing is a mother fucking BEAST to install. It took me and three of my buddies 6 hours to install this thing with the part list the other guy posted.
I would have paid the dealership TWICE to install it. Its doable with the right tools, but man, it was 9.5 on a scale of 1-10 in difficulty.
​
And just a heads up, the rivets and push pins he posted didn't work well. I bought other rivets and push pins later, and went back and replaced the ones he posted.
These are the ones that worked for me
https://www.amazon.com/gp/product/B0040D2PEW/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
​
and these push pins
https://www.amazon.com/gp/product/B07H87MWHN/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
​
​
good luck man. Like i said its doable. But devote an entire day to do it
​
​
Eastfly Car Door LED Logo for Dodge Challenger Projector Ghost Shadow Lights, Entry Welcome Lamp Logo Light, LED Courtesy Step Lights Ground Lamp Kit Replacement (1. Scat Pack Emblem for Challenger) https://www.amazon.com/dp/B07VNY21LR/ref=cm_sw_r_cp_apa_i_ImpXDb0HVYGEF
I just changed it with a flat head screwdriver and tweezers, super easy
Here's Mopar's instructions for removing the front fascia. Just disregard the part of the instruction about removing the chrome grill surrounds (that has nothing to do with what you're doing)
Tool for putting in plastic pop rivets
plastic pop rivets
replaceable rivet clips - not really necessary as you can re-use the ones you take out. But good to have handy.
Trim removal tool - not completely necessary, but helps to have them and prevents scratching things
at 10mm deep socket - this is necessary to get 2 nuts that are stuffed up in the fender. You'll also need a long extension to get to those
It took me about 5 hours to do start to finish, by myself in my garage. Only help I had was lifting the front fascia off (my wife helped) because you really need 2 people lifting (one on each end) to get it off without breaking anything. If you have someone to help you, you can get it done in much less time
i have the corsa cat-back xtreme for my 2014, i love it. not sure if it will fit on a 2015 though.
when i picked it up from my mechanic he commented on how nice of a system it was, i value his opinion very highly so it was nice to hear a professional thought it was a good system.
edit: not my video but here's a sound clip of it: https://www.youtube.com/watch?v=8SQ7ThWjaxk
Flowmaster Super 10s I got from Amazon, just had them installed at a local muffler shop. Also, had the resonators cut out.
Ordering my Mopar pins from amazon through Steve White Motors.
2008-2011 DODGE CHALLENGER CHROME HOOD PIN KIT MOPAR
https://www.amazon.com/dp/B005LGXYQ0/ref=cm_sw_r_cp_tai_.MejDbBE6KP6Y
https://www.amazon.com/VHT-SP999-Nite-Shades-Cover-Translucent/dp/B000CPCRS6/ref=sr_1_sc_1?ie=UTF8&qid=1468273398&sr=8-1-spell&keywords=vht+nightsahde
if you really wanna ;)
awesome. get these or youll be sorry. https://www.amazon.com/Door-Shox-VALET-Protector-Protection/dp/B002BB3VWA
I know they work because everytime i get lazy, thinking, "oh i parked all the way in the back theres plenty of parking for these A holes.." I come back to a nice new ding from some dipshit that couldnt resist parking next to me with their junkyard on wheels.
I bought this one like 3 and some years ago so there might be better options at this point, but mine has worked ever since without any issues. I can actually see a bit of the sides of the car where the license plate dips in because of the wide lens.
https://www.amazon.com/dp/B0051XB46A/ref=cm_sw_r_cp_apa_9Uyzzb51W06EN
Hurst 5380402 Black Comp Stick Kit for Dodge Challenger RT https://www.amazon.com/dp/B001P22NGG/ref=cm_sw_r_cp_api_SZ0KAbYMY1AP3
i dont know if this is similar to what you want?
I got a proclip mount, added a plate with a mounting ball to it then attached a wireless charger phone mount to the ball. I did have to drill out the holes in the proclip in order to attach the mounting ball and I do sometimes bump into it when I shift into reverse (6 speed).
Proclip: https://www.proclipusa.com/product/855052-proclip-angled-mount
Mounting Ball:
https://www.amazon.com/gp/aw/d/B002ACP2FY?psc=1&ref=ppx_pop_mob_b_pd_title
Wireless charging Phone Mount :
https://www.amazon.com/iOttie-Wireless-Samsung-Standard-Devices/dp/B0792ZNXCV?ref_=bl_dp_s_mw_4533650011
They also make a version of this mount that doesn't have a charger built in
There’s a module available that can be used with the OEM hardware. (AutoLoc WC1000 One Touch Up And Down Window Unit https://www.amazon.com/dp/B000BTQMW0/ref=cm_sw_r_cp_api_x4aWAb522AE7K)
I might give it a try since it’s not too expensive.
I don’t own this beautiful car yet, but from what I gathered they are using this they suctioned it to the windshield, don’t think it would scratch anything.