(Part 2) Top products from r/Chevy

Jump to the top 20

We found 11 product mentions on r/Chevy. We ranked the 31 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/Chevy:

u/colethetechie · 1 pointr/Chevy

Yes and no. I didn't touch anything metal or have to take airbag out. I just undid three screws below and took off plastic housing. Below is what I purchased, I'm not sure if it will fit Malibu or not, as mine is the Cobalt. I think it was pretty easy, make sure you don't strip screw like I did. It was a pain to get out. 😂

ACDelco D6254E GM Original Equipment Turn Signal and Headlamp Dimmer Switch https://www.amazon.com/dp/B004940ZSK/ref=cm_sw_r_cp_api_i_SWqwCbS8T67Q2

u/stiv2k · 1 pointr/Chevy

> how big of a job am I looking at?

We need to make sure your wiring harness is not damaged/chewed by critters before making that call. Wiring repairs generally aren't too hard if you know how to properly cut and splice. The O2 sensor is only 4 wires. The sensor itself is only held in by the threads, so it's as easy as unscrewing the old one and screwing the new one back in. Sometimes these oxygen sensor adapters for your ratchet can help a lot for loosening the old one since it can be on there pretty tight.

u/HotPretzelz · 1 pointr/Chevy

I have decided to purchase these from amazon. I will let people know how they fit. I figured a universal set would be better than a custom one that did not fit at all.


u/Eine_Bier_Getrunken · 1 pointr/Chevy

Well, out where i am in Cali, I rarely see temps < 40 haha. Are they by chance these? I would probably replace the halos that come in them because the reviews say they die.

u/seuss_-MD · 1 pointr/Chevy


I got mine at home depot

u/ShaneTrain13 · 1 pointr/Chevy

I work as a detailer and my tool of choice is a brush with rubber "teeth" on it similar to [this one] (http://www.amazon.com/Chemical-Guys-ACC_S06-Professional-Removal/dp/B0042B4B3U)

u/KubaWysota · 1 pointr/Chevy

The mount is just a regular mount that is meant to be hung off of houses. I mounted that at the bottom of my bed, and then toward the top I actually used a door handle (lol), intentionally not big enough to go around the pole, I drilled it around the pole so it kind of bent around it, securing it.

For the pole, it is just a black steel pole, 3/4", 5 foot tall. I got all of those at my hardware store.

It sits just fine, I've had at 100 mph and it sure as hell wasn't going anywhere.

I can't get to my truck right now, the transmission blew just yesterday unfortunately, but I drew this picture to kind of show how it looked.