(Part 2) Top products from r/EDH

Jump to the top 20

We found 31 product mentions on r/EDH. We ranked the 180 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/EDH:

u/Yogurt_Ph1r3 · 2 pointsr/EDH

I don’t even watch the show but I can confirm, it is one of the most fun board games I’ve ever played. It relies very little on rng so you’d think it would get stale, but it does have rng elements and enough unknown factors that it never seems to. They also have an expansion that adds House Arryn and Targaryen and I haven’t played it but my brother had it and I’ve heard great things. If you have a friend with it, try it out. If not, go to a board game cafe to test it out. If you are willing to spend money already because you’re that confident of the quality here’s a link.

u/Spaceman1stClass · 1 pointr/EDH

Hmm, not really. Not that meet your specifications anyway. I like to store my decks individually and usually use Dragon Shield's Nesting Deck Boxes of various colors. I keep these in a camera case, specifically This one.

I prefer not to share cards between decks because it limits me from making samey, expensive decks. If it's not worth two copies it only goes in one deck.

Just searching online though I found this. It may work for you, but I haven't tried it myself. Seems like it could hold about 1500-1800 cards single sleeved.

Edit- Some of my friends who've gone off and had kids and thus have better things to spend money on have started using tackle boxes from Home Depot. They seem to fit pretty well, but if I were you I'd pick one out in person, since they certainly weren't designed with your cardboard in mind.

u/sigismond0 · 2 pointsr/EDH

Don't know about piface, but here's what I do.

  1. Use acetone to remove the face from a foil. Amonkhet foils, for whatever reason, are really really easy to wipe off, so I recommend that.
  2. Print out your proxy on adhesive transparency paper. (I use this.)
  3. Stick the transparent printout to the blank foil.

    Easy as pie. Costs less than a dollar per proxy, and they look excellent.
u/Barrett82A1 · 1 pointr/EDH

I have tried the transparencies method and printed the image reversed, then glue the image face down but that leaves tiny glue spots on the image and it is another step. I have been using Clear Sticker Paperand it is much cheaper. Sticker paper leaves no marks on the image, but the ink is exposed. I put the cards in a perfect fit sleeve and it is now protected from smudging. The extra benefit of sticker is you can peel the image if you need to and reuse the card.

u/Cobalt_Anubis · 4 pointsr/EDH

This one is what I use. Its big, and obnoxious, but holds my current decks (14) in jewel cases laying flat, big dice bag, and 4 playmats. The inside has a rubber foam padding and it comes with some dividers (tho the are kinda cheap and will tear up the padding if you arent careful). The lid has a divider that can be removed and if you bend or remove the metal tabs on the lid (ment to keep the lid divider in place) you can fit even more decks if you place them on end.

With my set up i can set up with friends and be able to have a solid multiplayer game without anyone else needing to bring anything

*ninja edit: if you have prime it knocks $20 off the price making it much more worth it

u/DutchSpoon · 1 pointr/EDH

I know this is not what you asked, but i had the same problem as you did last year. It's kind of expensive but I use this:

Ultimate Guard Superhive Flip Case 550+. It holds 550 lose double sleeved cards, 2 playmats and has a dice compartment (although it's rather small). But that's not why I bought them. It holds smaller deckboxes as well! For edh I use the Ultimate Guard 100+ Sidewinder. Four of these deckboxes fit in the Superhive with some spare room for tokens.

The Superhive also fits perfectly into my backpack. Hope it might help someone.

u/MusicIsFleeting · 2 pointsr/EDH

UltraPro makes postcard sleeves that are larger than oversized cards, but open on the short side and shuffle nicely. They are clear instead of having a colored/textured back so they look like penny sleeves. But they're cheap and work well. I got them after having the same complaint for my Planechase stuff, and commanders.
http://www.amazon.com/gp/product/B001A3BEW4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Also for my planechase stuff, I had a shopkeeper suggest laminating them. Which really isn't a bad idea if you intend to keep things for a long time (and planes aren't super expensive, I don't think).

u/LinkOpensChest_wav · 4 pointsr/EDH

Here's what I do: I put them in these first, and then slide these postcard sleeves over the top. The postcard sleeves fit perfectly over the top of the Ultra Pro oversized commander sleeves. There is a little overhang at the bottom which can be easily trimmed with a hobby knife if it bothers you. So it's sort of a reverse double sleeving, but just as protected nevertheless.

u/brianv3ntura · 3 pointsr/EDH

Hmm I was looking at amazon and found this:
https://www.amazon.com/dp/B0779Z1VLG/ref=cm_sw_r_cp_apa_i_3A.VDbTV9J97B

Judging by the reviews, it looks like it can fit 1000 double sleeved cards. Someone mentioned 800 double sleeved card in 4 rows and used the 5th row of misc accessories.

 

But personally for me in use something similar to these:

https://www.amazon.com/dp/B00FO802R4/ref=cm_sw_r_cp_apa_i_aE.VDb45ZQBGR

I buy them at my LGS that sells them for pretty cheap and put them into my backpack ( 3 at most). Each can hold abt 3 decks each.

It's not the sexiest way to carry around decks, but it sure is cheap and effective...

u/EdithKeelerMustDie · 2 pointsr/EDH

Supplies: Clear Inkjet Printable Film with Adhesive Backing, Inkjet Printer, Software that allows you to specify the size of printed image (for example OpenOffice), Foil Magic Card, Acetone (aka Nail Polish Remover), Cotton Balls/Paper Towels, Newspaper/Packing Paper (or any surface cover that you don't mind getting ink on), Masking Tape/Painter's Tape (or any tape that will peel away from a magic card without tearing the magic card), Scissors.

Roll masking tape into 4 small cylinders with sticky side out. On the back of the foil magic card, tape the back corners to the newspaper using the masking tape cylinders. Wet cotton balls with acetone. Rub the front of the foil magic card using the acetone-wet cotton balls to remove ink from the front of the foil magic card towards the newspaper. Once all ink is removed, you should have a magic card with a blank foil front.

Download digital alter image. Open the digital alter image in your software. Resize image to approximately 63 mm x 88 mm (2.48 inches x 3.46 inches) while preserving aspect ratio. You can probably fit 4 images per page, so also try a few sizes bigger and smaller, in case your printer prints slightly smaller or bigger than you specified. Load clear inkjet printable film in inkjet printer. Print page of images. Let the page dry for at least 10 minutes.

Cut image stickers out using scissors. Peel adhesive backing from image sticker. Align corners of cut-out image sticker over the blank foil magic card, and lower the image sticker down very slowly. You only get 1 chance at adhering the image sticker to the blank foil magic card. Go very slowly. If you adhere it mis-aligned, it is nearly impossible to separate the sticker image from the magic card, you will probably permanently bend the magic card, and the adhesive will smudge and look like a blotch in the artwork.

Due to the thickness of the clear printable film, the printed card will not fit in an inner sleeve, and will sometimes not fit in a normal sleeve unless you cut the edges even more with scissors.

Here is an example digital alter image

https://i.imgur.com/WyBBwbv.png

and the corresponding printed card

http://u.cubeupload.com/EdithKeelerMustDie/SylvanCaryatid.jpg

​

u/lglugo · 3 pointsr/EDH

https://www.amazon.co.uk/gp/product/B00B9Q9QY0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I've had this link saved for a while since someone posted a full art foil black lotus. You can make your proxies on this and stick it to acetoned foils and it turns out pretty well. Not super extra thick and not noticeable if you double sleeve the non proxies

u/buggy65 · 1 pointr/EDH

The sleeves I linked are top loaders. Shipping stinks, but if you buy multiples at once it doesn't stack too bad. Do not be fooled, with the art supplies, rarer Oversized cards, and sleeves this was not a cheap deck to build.

u/Derpin-outta-control · 1 pointr/EDH

I took the mono blue precon commander and made it all big sea baddies and added as much water based cards that are good and fit the theme.
And then I put it in these sleeves https://www.amazon.com/dp/1616616717/ref=cm_sw_r_em_awd_l-FGwb9NY34G1
I've contemplated changing out the commander from the teferi planeswalker but it's hard to beat his untapping of mana rocks for ramp.

u/Sopor42 · 2 pointsr/EDH

I use one of the Ultra-Pro "Dual Flip Box" with the fake leather and mana symbol (green of course). There is a divider that moves to allow for either 2x100 card decks, or 2x60 card decks and ~30 oversized cards. I've removed that divider and the whole 80 oversized cards fit with sleeves.

u/Tartaras1 · 1 pointr/EDH

That's note quite the one I was thinking of. The one I was thinking of was this.

I might order a PL deck box and give it a try.

u/RamsyElKaboom · 1 pointr/EDH

I triple-sleeve all my decks. This fits all 100, triple-sleeved cards in the main compartment, leaving room for tokens and dice in the sub-compartment:

Amazon link.

u/ProtoJMan · 1 pointr/EDH

Something very similar to this. Take out the yellow containers and use my plastic double-sleeved dragonshield cases and single-sleeve normal cases with art on them. Fits 12ish decks, maybe more.

u/MayhemMessiah · 2 pointsr/EDH

I use two chessex minidice boxes in different colors to keep track. Which I generally use one color to track untapped/can attack, the other color to say which have summoning sickness and the like.


But depending on the deck multiple tokens might be necessary, especially if Cathars’ Crusade is involved.

u/intracellular · 1 pointr/EDH

I use one of these bad boys. It can hold 16 decks in Ultimate Guard Flip 100 boxes, or 12 plus a playmat tube and dice bag. It looks a little bit like you're carrying a bomb or a bunch of cash, but depending on who you are that could be a pro or con. Plus it has optional locks and keys if you have some valuable cards or shifty characters at your shop and it's damn near waterproof.

u/InsidiousToilet · 1 pointr/EDH

Out of curiosity, is this this same thing? How does it stayed securely closed? All I'm seeing is a little clasp on the side. I usually use the big, cheap Ultimate Guard tower things that have the little die tray on the bottom that slides out...but after 3 months, my most-used one is starting to loosen up and has spilled the cards out twice, so it's time for a replacement.

u/SirPasta117 · 3 pointsr/EDH

I bought these inner sleeves, and these sleeves. Although when I got them they were a little cheaper. Although I only got 80 sleeves total so unfortunately I had to leave 6 sleeved (I just choose the 3 worse plane cards to leave un-sleeved) I also modeled and 3d printed a deck box for them.