Top products from r/FocusST

We found 71 product mentions on r/FocusST. We ranked the 266 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/FocusST:

u/MagneticGray · 3 pointsr/FocusST

Here are some that I ordered from:

JST Performance - Cobb Accessport, Custom Tune, Turbosmart blow off valve, NGK 1 step colder spark plugs

James Barone Racing - Weighted short shift plate, Aluminum shift cable bracket bushings, Symposer delete, Green Air Filter (because they sell the gray one)

Depo Racing - 3.5" intercooler, catless downpipe, intercooler pipe kit

Boomba Racing - shifter base bushings, short shift lever

Tire Rack, Discount Tire Direct - wheels and tires. Both offer great deals but I go with Tire Rack because they include an amazing road hazard warranty for free with every tire you buy.

Tasca Parts - OEM Ford parts. Some good options: RS airbox lid, RS Shifter, RS engine cover, RS intake pipes

Amazon - ZL1 Rock Guards (tiny but very effective mud flaps), CravenSpeed stubby antenna, 3D (Mugen) style Window rain visors, Philips H11 Xtreme Vision headlight bulbs (same color as stock but 100% brighter), Stainless T-clamps for your intercooler, Motul Multi DCTF transmission fluid, and TONS of Meguiars car care products.

Walmart - best price for Mobil 1 5w-30 full synthetic engine oil, often have coupons for it too.

u/Collin317 · 3 pointsr/FocusST

I used motul dct fluid. It takes 1.8qts. I got 2 qts on Amazon for like $40ish bucks. If you decide to do it, make sure you get a pump of some sort with it. It would have been damn near impossible to try to pour it from the bottle. Even with their funnel extension thing that comes off the top.

I ended up having to loosen my rear motor mount and kinda swinging the transmission out of the way to get my 8mm Allen key socket to fit, and then fit a wrench over the rest of the bit to get it to work. It sounds a lot more difficult than it is, but trust me. It's worth it. There are a few videos on YouTube that show what I mean pretty well. Seems like most people use a shortened Allen key, but I didn't have anything to cut an Allen key

Just make sure you keep the car level. I used a jack and jack stands and it worked well.



Motul Multi DCTF - Dual Clutch Transmission Fluid (Pack of 2) https://www.amazon.com/dp/B00N30M7S2/ref=cm_sw_r_cp_apap_BDfTo3WyYlhH1

u/soldersmoker · 2 pointsr/FocusST

First off, congrats and welcome!

Hardwiring the DashCam was pretty easy, this is what I got for the job:

[Mobius ActionCam] (https://www.amazon.com/gp/product/B00GPXYVQU/)

12V to USB Power Adapter

Mini Add-A-Fuse Kit

Crimps

Crimping Tool

And finally the instructions for wiring and routing the cable nicely:
http://www.focusst.org/forum/focus-st-electronics/13092-simple-instructions-hard-wiring-radar-detector-other-device.html

There's different fuses you can use depending if you want it on all the time or just when the car is on.

For floor mats I got these and they're great:
3D MAXpider

u/Kiethavemezo · 3 pointsr/FocusST

The bot is getting down voted, but I thought it was pretty funny.
Here's the actual link - VCiiC Leather Car Remote Key Case Cover Fit for Ford Mondeo Focus 3 MK3 ST Kuga Fiesta Escape Ecosport Titanium , etc https://www.amazon.com/dp/B01LZ9CNG7/ref=cm_sw_r_cp_apa_51A6Bb68XAE55

u/Al_Tilly_the_Bum · 1 pointr/FocusST

I have an A119. Good picture quality and a decent price. Street Gaurdian has some of the best night vision around. Blackvue is one of the most discrete.

Don't get the Rexing. It is a clone of the A118 and they bought their way to Amazon's best sellers. It is not a terrible cam, but the A119 is better, cheaper, and is not a knockoff with fake Amazon ratings.

u/theprimeministr · 1 pointr/FocusST

There are plenty of options for mounting your phone, but I suppose it's a matter of what your preferences are (e.g., vent mount, CD slot mount, dash mount, other) in terms of obstructing certain things in the car.

I personally use a Kenu Airframe vent clip mount. I mount it on the left center vent which offers great visibility. I personally don't mind vent clip mounts as the A/C keeps my phone cool during the Summer months and it doesn't interfere with the nav display at all and is quite discreet.

If you're okay with using a case and/or sticking a magnet on your phone, then you could also consider the KUDA mount which offers a fairly OEM appearance.

u/ReallyQuiteDirty · 1 pointr/FocusST

https://www.amazon.com/gp/aw/d/B01IDHOBJM?psc=1&ref=ppx_pop_mob_b_asin_image

I have these in yellow and I love them. Easy to "install" and look great too. They have quite a few color options.

I also have yellow LED bulbs under the vinyl as well.

u/SneakytheThief · 3 pointsr/FocusST

I bought this :

Noico 80 mil 36 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening https://www.amazon.com/dp/B00URUIKAK/ref=cm_sw_r_cp_apa_i_eaFRCb9SKPTV6

I also bought a cheaper third party roller for the install.

That said I bought way too much. I only needed about three sheets for the spare tire well.

When the weather's nicer I'll probably work on deadening the rest of the car for general comfort and vibration reduction. I don't expect any additional improvements for drone, just road noise.

u/DigitalBaka · 3 pointsr/FocusST

Open ended oiled filter. Seen them in the $40 range on Amazon occasionally. Not much performance gain but the noise is good for miles of smiles.

https://www.amazon.com/Green-Filter-7159-High-Performance/dp/B000CMHIR4/ref=sr_1_3?keywords=green+filter&qid=1555005232&s=gateway&sr=8-3

u/MonkeySpanker22 · 1 pointr/FocusST

No none at all. It's honestly the perfect amount of noise. Loud enough for me when I want it, but quiet when I want it quiet.

The bov I have is www.amazon.com/Turbosmart-TS-0203-1061-Blow-Off-Valve/dp/B00IGWW5UC

Very easy install. Placement of BOV is behind front right wheel.

u/Tylerb4955 · 3 pointsr/FocusST

I went with the 3D MAXpiders for the front and love em. Whole set is pretty cheap though

https://www.amazon.com/3D-MAXpider-Complete-Custom-All-Weather/dp/B009TA4U94

u/Gorky1 · 2 pointsr/FocusST

They're nice filters. Super cheap on amazon with next day shipping as an add-on item.
https://www.amazon.com/Motorcraft-FL400S-Oil-Filter/dp/B000AS3D42/

That, with full synthetic oil at $28, makes my oil change just over $31.

u/Lobstrich · 1 pointr/FocusST

I use the Kenu Airframe You should check out their video. Really great product, even better than I expected. Works with any phone, and even a tom tom, if you remove the bracket first.

u/pdevente · 1 pointr/FocusST

Got it. And yep, you'll just need thinner/'tuner' lugs for the wheels.
Lots of people (including myself) run Gorilla Lugs and have had good experiences. Of course any lugs a shop provides should do just fine as well.

Gorilla Automotive 21133BC Small Diameter Acorn Black 5 Lug Kit (12mm x 1.50 Thread Size) - Pack of 20 https://www.amazon.com/dp/B001O0AMZS/ref=cm_sw_r_cp_apa_i_7fajDbFTTNN40

u/Mr_Snippy · 2 pointsr/FocusST

Take a look at these. They sell the fronts and rear separate, very subtle, clean easily, and relatively cheap.

Only thing I noticed, don't expect them to function as well as some of the larger mudflaps. They won't keep all the mud off of your car, simply because they are much smaller.

u/j73214793 · 1 pointr/FocusST

I got the Boomba kit. Personally, I think its worth the $150 not only because of the materials but also the R&D that went into the design. Though I'm curious how your DIY kit goes, let me know!

One thing I will say is to look into getting a stubby antenna when you do the riser otherwise the stock antenna will hit the spoiler when you lift your hatch. I got this one from Amazon for $25 and so far its held up really well.

u/ac2531 · 5 pointsr/FocusST

Not OP, but the front lip looks like it’s either Maxton Designs or Triple-R composites.

The fog light films are crazy cheap and easy to install.

Not sure on what intake snorkel that is, but I’m assuming it’s a Velossa Tech Big Mouth.

---

Edit: formatting

u/Cory-FocusST · 1 pointr/FocusST

I ended up getting one of these for mine. Doesn't have an ST logo, but it looks pretty good and I've had it in that for about 7 months now with no signs of wear.

u/Jljoejl · 1 pointr/FocusST

VCiiC Leather Car Remote Key Case Cover Fit for Ford Mondeo Focus 3 MK3 ST Kuga Fiesta Escape Ecosport Titanium , etc https://www.amazon.com/dp/B01LZ9CNG7/ref=cm_sw_r_cp_api_meA6BbFFCH4V0

u/Ambitious_Transition · 1 pointr/FocusST

>https://www.amazon.com/dp/B00URUIKAK/ref=cm\_sw\_r\_cp\_apa\_i\_eaFRCb9SKPTV6

Man this seems tempting but wow that's expensive. Any DIY ideas that are cheaper? I'll look at the material type.

u/ryanliftsheavy · 1 pointr/FocusST

I bought these and they Work great. Held on with 3M tape, and they’ve been on for a few months now through rain and sunshine with no issues.

u/mkelleygcsi · 2 pointsr/FocusST

Got it here..

http://www.amazon.com/Green-Filter-7159-High-Performance/dp/B000CMHIR4/ref=sr_1_1?ie=UTF8&qid=1425668660&sr=8-1&keywords=focus+st+green+filter

Came pretty quick, got it in 2-3 days. As far as performance goes, there isnt much of a difference. It sounds great though! Left the top of the air box off.

Ive been thinking of getting the rokblokz myself. Window tint is iffy for me, due to it being illegal. Got popped in my RSX for it.

u/morriscode · 1 pointr/FocusST

Running a rexxing(https://www.amazon.com/V1-Dashboard-Recorder-G-Sensor-Recording/dp/B00X528FNE). Honestly I'd just buy some Chinese knock off if I was looking to replace it. But it works well.

u/krazysrfr · 2 pointsr/FocusST

this one: https://www.amazon.com/gp/product/B000CMHIR4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

i like it so far it adds a bit more induction noise and it looks like it keeps the oil cooler just by a little bit.

u/d_4bes · 1 pointr/FocusST

They are available on Amazon again.

Fortunately it’s not totaled. I’m very happy about that.

u/nonoriginal85 · 1 pointr/FocusST

Check this out, pal.

https://www.amazon.com/dp/B01090YNX0/ref=cm_sw_r_cp_awdb_Y52pyb8Y5TG0T

I was a get one but the front license plate bracket was already drilled in. Can't decide if it looks better with holes or the plate.

u/westcoastroasting · 1 pointr/FocusST

Sure. Philips H11 X-tremeVision Upgraded Headlight Bulb with up to 100% More Vision, 2 Pack https://www.amazon.com/dp/B00U1OIESK/

u/maximos92 · 4 pointsr/FocusST

They should fit, but for that price you might as well get some 'aftermarket' ones.

These are the ones I use.

u/Silenthunter87 · 2 pointsr/FocusST

purchased mine from Amazon because, free prime shipping.

u/utility_truck · 2 pointsr/FocusST

Gorilla Automotive 21133BC Small Diameter Acorn Black 5 Lug Kit (12mm x 1.50 Thread Size) - Pack of 20 https://www.amazon.com/dp/B001O0AMZS/ref=cm_sw_r_cp_api_i_1GMQDbJW3H393

fiesta lugnuts size : 12x1.5

u/poolhaus · 2 pointsr/FocusST

So far these are the only ones I have considered.
Ford Focus ST rock guards - 1 pair https://www.amazon.com/dp/B00R6UOPEO/ref=cm_sw_r_cp_api_xuQoyb8WC58G0

It creates a more squared off body shape without being ridiculously oversized.

u/Astarlyne · 1 pointr/FocusST

Where are you seeing $250? CJ has it for $170, and its $157 on amazon.

http://www.amazon.com/Turbosmart-TS-0203-1061-Blow-Off-Valve/dp/B00IGWW5UC/

u/Cincy-with-a-y · 1 pointr/FocusST

These are what I have on my car.


Gorilla Automotive 21133BC Small Diameter Acorn Black 5 Lug Kit (12mm x 1.50 Thread Size) - Pack of 20 https://www.amazon.com/dp/B001O0AMZS/ref=cm_sw_r_cp_api_i_O.NQDbX1GHN1V

I’ve had them since January 2018 (According to my amazon page)

I don’t know if it’s a solid piece or a cap, but the way it’s splined, you don’t get the sheering of the bolt that the OEM ones do.

I haven’t had any issues or warping with mine either, and I take my wheels off often enough rotating them and such.

u/ewhite81 · 4 pointsr/FocusST

Not OP but I found this one that looks similar.

u/rallispec · 2 pointsr/FocusST

I had the husky ones, I did not like them at all... Seemed like they didn't sit very flush with the floor and just seemed cheap and plastic-y.

Replaced with these and couldn't be happier, liked them so much I picked up a set for our other car too.


https://www.amazon.com/3D-MAXpider-Complete-Custom-All-Weather/dp/B009TA4U94/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1525264779&sr=8-1-fkmr0&pi=AC_SX236_SY340_FMwebp_QL65&keywords=3d+max+focus+floor+mats


u/Swiss_ST · 1 pointr/FocusST

Turbosmart TS-0203-1061 Blow-Off... https://www.amazon.com/dp/B00IGWW5UC?ref=ppx_pop_mob_ap_share

The dual port shortie is the 100% recirculating BOV. There is no ventilation into the atmosphere so you will not get the “pshhhh” sound when you close the throttle.

u/Black92hawk · 2 pointsr/FocusST

Green Filter 7159 Green High Performance Air Filter https://www.amazon.com/dp/B000CMHIR4/ref=cm_sw_r_cp_tai_IaEszbMN7H88X

Resonator is part of the exhaust system, $50 From my local muffler shop to remove it and put a straight thru . Gives the exhaust a little character without being loud

u/skurdnee · 1 pointr/FocusST

I went with these front and back. I like how subtle they are compared to the other ones out there. They came with a sheet that helped with mounting them. The rear ones were confusing at first, but it's three screws total. You have to remove clips from the carpet liner and use those holes for the screws.

https://www.amazon.com/Ford-Focus-ST-rock-guards/dp/B00R6UOPEO