(Part 2) Top products from r/GalaxyNote3
We found 22 product mentions on r/GalaxyNote3. We ranked the 56 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. N3 SlimPWRcard - 0.5mm Ultra Thin Qi Receiver Card Module for Samsung Galaxy Note 3 III Compatible with S-View Cover and NFC Function
Sentiment score: 0
Number of reviews: 1
Qi Wireless Receiver card fits discretely under your existing Samsung Note 3 cover to enable Qi charging with any Qi charging pad (pad not included, the perfect companion Qi pad is the Fonesalesman QiStone+, WoodPuck or Koolpad)Just stick onto your Phone, under the battery cover. It is Light, Ultrat...
22. Bezel Frame Case Cover LCD Holder Plate Replacement for Samsung Galaxy Note 3 LTE N900A at&t
Sentiment score: 0
Number of reviews: 1
23. PNY Elite 128GB, up to 85MB/Sec, Microsdxc Card -UHS-I, U1 (P-SDU128U185EL-GE)
Sentiment score: 0
Number of reviews: 1
Upto 85mb/s read speedClass 10 UHS I, U1 speed class performance allows for fast and smooth continuous shooting and full HD video recordingPerfect for android smartphones & tablets, action cameras, drones, computers, and moreRecord and transfer videos, photos, music, files and more at amazing fast s...
24. Arkon Sports Running Jogging Neoprene Smartphone Armband iPhone 6S 6 with Case Samsung Galaxy S6 S5 HTC One M9 - Retail Packaging - Black
Sentiment score: 1
Number of reviews: 1
For iPhone 6S and 6 with case Galaxy S6 and phones with screen size up to 5.3 inches or 5.5 inches in heightIncludes a small storage pouch and touch compatible coverNeoprene armband secures with nylon hook and loop closure2 year limited warranty
25. Sennheiser CX200 Twist-to-Fit Earbuds
Sentiment score: 1
Number of reviews: 1
Connectivity Technology: WiredInnovative holding system (Twist to Fit system) ensures best possible fit, High passive attenuation of ambient noiseImpedance: 16 ohm, Frequency Response: 20 - 20000 Hertz, Sound Pressure Level (SPL): 110 dB, THD (total harmonic distortion): <0.2 percent, Cable Length: ...
26. Infrared Resources 9ft 38-56kHz Dual Band External Universal IR Receiver Extender for Verizon FiOS + Most Cable Boxes, Hotel and DTA Units.
Sentiment score: 0
Number of reviews: 1
AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the lbox is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into t...
27. Arkon Friction Dashboard Car Mount Holder for Apple iPhone 5 5S 5C 4S 4 3GS iPod touch
Sentiment score: 1
Number of reviews: 1
Item is discontinued see Model IPM6122 year limited warrantyU.S. Pat. No. 6,585,212
28. Monoprice IR Extender Cable - 5 Feet (Receiver)
Sentiment score: 0
Number of reviews: 1
This Ir Receiver Extender Cable Is A Receiver Device For Use With Infrared Remote ControlsIt Plugs Into A Source Device Or IR Extender And Serves As The IR Sensor For Remote Control InputIt Is Compatible With The HDMI Extender Wall Plates From MonopriceCable Length 5 FeetReceiver included onlyThis I...
29. IK Multimedia iRig Mic Cast with Stereo Mini-Jack Headphone Output, Podcasting Mic for iPhone/iPod Touch/iPad/Android Devices
Sentiment score: 0
Number of reviews: 1
Compact condenser microphone for podcasting and field recording with outstanding sound quality1/8” headphone output for real-time monitoring with supported appsUnidirectional design rejects noise for clearer recordingHi/Low sensitivity setting for ideal sound quality in a range of environmentsBump...
30. 2-Pack Micro USB 2.0 Cable 6FT (Manufacturer Discontinued)
Sentiment score: 0
Number of reviews: 1
Cable Matters 2-Pack Micro USB 2.0 Cable 6FT (manufacturer discontinued)
32. AmazonBasics USB 3.0 Cable - A-Male to Micro-B - 6 Feet (1.8 Meters)
Sentiment score: 0
Number of reviews: 1
One USB 3.0 Cable - A Male to Micro B - 6 Feet (1.8 Meters)Ideal for connecting USB 3.0 enabled PC peripherals such as hard drives, printers, network hubs and moreEnables throughput of up to 4.8Gbps when used with a USB 3.0 host and deviceConstructed with corrosion-resistant, gold-plated connectors ...
33. AmazonBasics 7 Port USB 2.0 Hub Tower with 5V/4A Power Adapter
Sentiment score: 0
Number of reviews: 1
Package includes: 1 USB 2.0 7 Port Hub / 1 5V/4A Power Adapter / 1 USB 2.0 Cable (3 feet) / 1 Owner's ManualInstalls with Plug-and-Play easeComplies with USB specification version 2.0; backward compatible with USB 1.1Check your device loading current when used for charging (e.g. iPads/Tablets) or fo...
34. Minisuit Bluetooth Keyboard Stand Case for Google Nexus 7 (1st Gen 2012) Rubberized Back
Sentiment score: 1
Number of reviews: 1
Compatible Model: Google Nexus 7" Inch Android Tablet (tablet not included)Feature 1, As a keyboard: Rechargeable, wireless, bluetooth keyboard is sleek, professional, easy to use, and easy to carry. Charging time: 4-5 hours, Standby time: 60 days, Uninterrupted working time: 55 hours.Feature 2, As ...
36. iBOLT xProDock Active Car Dock/Holder/Mount for Samsung Galaxy S3, S4, Note 2 & Note 3 with aux-Out to car-Speakers. Works with All Cases and Extended Batteries.
Sentiment score: 1
Number of reviews: 1
New lower price while supplies last!!!! Keep your phone charged and in a secure and easy to view position while driving. Listen to Music & GPS Apps through car-stereo using the included Dock'n Play cable (3.5 mm aux-in required on car-stereo). 2 meter cable allows left side of steering wheel placeme...
37. CHOETECH Wireless Charger, 10W Max Qi-Certified Fast Wireless Charging Pad Compatible with iPhone 11/11 Pro/11 Pro Max/XS Max/X/8/8+, Samsung Galaxy Note 10/Note 10+/S20/S20+/S10+/S9, AirPods Pro
Sentiment score: 1
Number of reviews: 1
【7. 5W /10W /5W Wireless Charging】Fast wireless charge up to 10W for the Samsung Galaxy Note 10, Note 10 Plus, S10, S10 Plus, S10E, S9, S9 Plus, S8, S8 Plus, Note 9, Note 8, S7, S7 edge, S6 edge , 7.5W qi wireless charging for iPhone 11/11 Pro/11 Pro Max/Xs Max/XR/XS/X/8/8 Plus (Note: QC2.0/3.0 ...
38. Tune Belt Model AB89 Armband for iPhone 11 Pro, SE (2020) X Xs 8 7 Samsung Galaxy S8 S9 S10e This size fits OtterBox Defender / Large Case - For Running & Working Out - Sweat-Resistant
Sentiment score: 1
Number of reviews: 1
FITS OTTERBOX and LIFEPROOF CASES – Keep your case on! Design fits iPhone 11 Pro, SE (2nd gen 2020), X/Xs, 7/8, and Galaxy S8 S9 S10e when these devices are inside an OtterBox Defender, LifeProof or other large caseEXCEPTIONAL COMFORT – For women and men, the soft, cushioning fitness armband mai...
39. TYLT VU Qi Wireless Phone Charging Pad (Black, 3 Coil) Tilted Stand & Fast Battery Charger Station for Compatible iPhone, Samsung, Google, Android & Qi-Enabled Cell Phones
Sentiment score: 0
Number of reviews: 1
FINALLY, FAST Qi WIRELESS CHARGING: Wirelessly charge any Qi-enabled phone with no plugs or connectors. The VÜ Charging Stand is a future-proof stand that creates a fast, safe, and easy charging dock that can quickly recharge your phone's battery at the same speed as a traditional charger. Pick you...
I use a $10 charging coil from Amazon and a $12 charging pad from eBay. Works perfectly and was super cheap. I don't get the point of $70 charging pads considering the $12 direct-from-China ones I have work so well. For the price just buy several and keep one by your bed, one in the kitchen, one at your desk, one at work, one in the car, etc.
Edit: I own the following:
DigiYes Qi Standard Charger Module with NFC for Note 3:
http://www.amazon.com/gp/product/B00GV0Q78M
Choetech Choe Upgraded Qi Wireless Charging Pad:
http://www.amazon.com/gp/product/B00C40OG22
Itian Qi Wireless Charger Mat (own 2 of these, one black and one white):
http://www.ebay.com/itm/231161584047
The receiver module is quite nice, fits easily into the Note 3 under the stock cover. It causes a slight bulge under the camera but it's not too bad. I haven't tested the NFC as CM11 doesn't have NFC working yet. It works through my Neo Hybrid case as well.
The Choetech charger was the first charger I got and while it works, I actually prefer the Itian ones from eBay. The Choetech is small and so you have to deal with lining up the center of the phone on the pad, plus the included USB cable didn't work. I ended up taking it to my office at work and keeping the new ones for home.
The Itian chargers I got because they were cheap, but they turned out to be very nice. Build quality feels nice and solid and the included cables work fine. It's almost the exact same size as the Note 3 so alignment isn't really an issue if you set the phone down in line with the pad. The red/blue LED isn't bright so I can put it in my bedroom without lighting everything up at night like the Choetech charger did. I'd highly recommend buying this charger.
Neither of those chargers came with an AC adapter so I use my spare HP TouchPad chargers (5.3V 2A) to run them. Works fine.
I picked up this case and abso-friggin-lutely love it. The phone's so slim, and this case doesn't bulk it up... I had two people ask me if I was going to get a case for my phone... then I told them it was ALREADY in a case!
http://www.amazon.com/gp/product/B00F423NQ2/ref=oh_details_o01_s00_i00?ie=UTF8&amp;psc=1
I also picked up this car mount that I love. It's not specific to the Note 3 but is much nicer than most universal mounts I've found and the company also provides a car-dock app that amazingly ISN'T garbage! This car mount works whether your phone is in a case or not but isn't nearly as bulky as a lot of universal mounts.
http://www.amazon.com/gp/product/B00AOCSFYC/ref=oh_details_o02_s00_i01?ie=UTF8&amp;psc=1
I use AutoGuard BlackBox as a dashcam app with this mount and the iBolt Dock'n Drive dock mode. It works great. I have the Dock'n Drive turn on Bluetooth only when I mount the car in the dock and it turns it off when I remove it from the dock as well. It's all around a very nice setup.
I have the iOttie One Touch XL and love it. The super sticky suction cup is awesome, and getting my phone in and out of it is completely no fuss.
I used to have an iPhone 4S and had an Arkon friction mount for it, but I got fed up with it because the suction cup kept coming unstuck from the base in the middle of driving. I love the idea of a friction mount because then I can move it out of view very easily when it's not in use, so when I got the iOttie and saw how sticky the suction cup was, I put it on the Arkon base, and it works like a charm.
I don't care much for sleek on a phone when a Zerolemon or something similar is available. I have my first Gen Nexus 7 with no case, and I baby my tech, so there's only one little scratch on it after almost 2 years. I've had it since August of 2012 and had a flip cover on it for a couple months when I first got it, because flip covers are cool. but I got a cheap one and it got filthy, so I stopped using it.
right now I've got a Captivate Glide with a Hyperion battery. the phone was already a little bigger because of the keyboard, but I nearly doubled its width to double my battery life. I would easily do the same on a Note 3 with a Zerolemon, which will triple the battery capacity. that's just me though. I'd rather have it be a little bulky with 4 days of battery life on light to moderate usage. that and one of Zerolemon's protective cases will be ideal for me. with a Zerolemon, it's worth the trade-off. but if it was just a case, I don't need it. both of my main devices are unprotected right now. I've thought about getting one of these for my tablet, and I've also thought about getting an Asus flip cover for it. one of the nice ones. as for the phone I have now, cases don't exist that fit over it with the battery. but this used to be my brother's and he's dropped it more than I have and there's not a single scratch on it. not everyone is that careful, and with a nice case, they shouldn't have to be.
what program was that, by the way? I've never heard of such a program. is that perhaps buried in the SDK somewhere?
I like the Sennheiser earbuds that I bought. I've had them for about 5 months now, and they've been pretty durable. I did not think they would hold up as much as they have for the cost, but I think they're really worth it!
I use this for my Note 3. Works great.
http://www.amazon.com/gp/product/B00910TQE6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&amp;psc=1
http://www.amazon.co.uk/gp/aw/d/B007V2G59K/ref=mp_s_a_1_1?qid=1397303699&amp;sr=8-1&amp;pi=AC_SX110_SY165
S pen with eraser
http://www.amazon.co.uk/gp/aw/d/B00FFBL47C?pc_redir=1397189961&amp;robot_redir=1
BT pen
http://www.amazon.co.uk/gp/aw/d/B00A7II980/ref=mp_s_a_1_13?qid=1397303789&amp;sr=8-13&amp;pi=AC_SX110_SY165
Wacom bamboo.
Enjoy.
I would check to see if your receiver has a secondary IR receiver port. Usually a 3.5mm jack on the back of the unit for an external IR receiver you can mount outside of your cabinets. Something like this.
Edit: Here is a much cheaper version.
Ok, yes, I get that. What I'm saying is the only thing avaliable in my town is this... the USB 2.0 micro B. But maybe my town is just in the stone age and no one carries them, which wouldn't surprise me in the least.
I've had the Samsung S-View flip cover for a few weeks and love it. I bought it on a whim when I saw the white/cream one -- the one that would have been my first pick anyway -- was under $10 on Amazon (and still is). It doesn't have a magnet to keep/hold it closed (which is ridiculous but beside the point) but the Spigen magnet is about $10 on Amazon and works great. I used the cover/case without the magnet for a few days (while waiting for it to arrive) and it's not un-usable without it, but it doesn't want to stay closed without it, especially after having the cover folded back.
Edit: Oh, I should mention: if you're into wireless charging, you don't necessarily need the S-View case/cover with built-in wireless charging. I bought my S-View case before I knew a wireless-charging version existed, but there are thin Qi receivers with NFC that work with the case. Mine charges wirelessly just fine with this one sitting on the battery.
Wireless charging has made my life a lot easier. I got this one for beside my bed.
http://www.amazon.com/dp/B00DG8NUC8/ref=cm_sw_r_udp_awd_BRjlub03TT9Y8
Charges as fast as a cable.
This one hasn't sold out yet: http://www.amazon.com/AmazonBasics-USB-Cable-Micro-Meters/dp/B008EQZ25K
Hi, i just ordered this one
http://www.amazon.com/gp/product/970771638X?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00
Is 7400 so i hope is not as big as the 10000 one, also it comes wit the case.
Actually I'm going to try out the iRig Mic Cast - http://www.amazon.com/IK-Multimedia-IP-IRIG-CAST-IN-Ultra-Compact-Microphone/dp/B007517AKK/ref=sr_1_2?ie=UTF8&amp;qid=1396485672&amp;sr=8-2&amp;keywords=irig+mic
I bought one of these 7 port USB 2.0 hubs. The 2 front ports supply plenty of power, they charge my phone just as fast as the charger that came with the phone.
This is half the price of that one. Still includes the bezel.
http://www.amazon.com/gp/aw/d/B00GGF7ZJM/ref=mp_s_a_1_1?qid=1417733834&amp;sr=8-1&amp;pi=AC_SY200_QL40
LINK.
I don't use my phone heavily, so it rarely gets hot. I would assume heat issues are from heavy use not from SD cards. note3's have thermal protection, but I've only triggered mine by leaving the phone in sunlight.