(Part 2) Top products from r/GuitarAmps
We found 24 product mentions on r/GuitarAmps. We ranked the 71 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. Genuine Fender Replacement 1/4" Internal Speaker Cable, 003-8566-049
Sentiment score: 2
Number of reviews: 1
Fender Model#0038566049
22. Lifetime 28241 Adjustable Folding Laptop Table TV Tray, 30 Inch, White Granite
Sentiment score: 0
Number of reviews: 1
Great for parties, work space, and moreMade of heavy-duty polyethylene plastic and steelAdjustable height settings for lots of optionsFold flat for storageStronger and more durable than wood, they will not split, chip or peel.
Dimensions (Open): 30" L x 20" W x 21" - 28" H
(76,0 cm L x 49,5 cm W x 5...
23. Guitar Amplifier Handbook
Sentiment score: 1
Number of reviews: 1
"Softcover 240 pages Size: 11"" x 8-1/2"" Author: Dave Hunter ISBN: 087930863X"24 pages"Size: 11"" x 8-1/2"""Author: Dave HunterISBN: 8793863X
24. The Guitar Amp Handbook: Understanding Tube Amplifiers and Getting Great Sounds
Sentiment score: 1
Number of reviews: 1
Backbeat Books
25. Hosa CSS-115 1/4" TRS to 1/4" TRS Balanced Interconnect Cable, 15 Feet,Black
Sentiment score: 0
Number of reviews: 1
Stereo 1/4" Male Phone to 1/4" Male
26. Hosa GPP-151 1/4" TS to 1/4" TS Right Angle Adaptor
Sentiment score: 0
Number of reviews: 1
Type: unbalancedConnector: female TS to angled male TSHosa adapters have received praise for their durability and excellent performance
27. Hosa D5S-6 CAIG DeoxIT 5% Spray Contact Cleaner, 5 oz.
Sentiment score: 1
Number of reviews: 1
Cleans, protects, lubricates, and improves conductivityReduces intermittent connections, arcing, and RFI as well as wear and abrasionSafe for use on all metal connectors and contacts and will not harm plasticsDispensing Type: SprayVolume: 5 oz
28. Furman Power Conditioner (SS6B)
Sentiment score: 0
Number of reviews: 1
15 foot power cordIlluminated ON/OFF switchCircuit breaker6-outlet blockEMI/RFI noise attenuationHeavy-duty metal constructionIlluminated on/off switchCircuit breaker
29. Ebtech Hum Eliminator
Sentiment score: 0
Number of reviews: 1
Uses 1:1 isolation transformers to break loop antenna and balance audio linesAlso converts balanced and unbalanced signals and cable types1/4" smart jacks can accept any combination of mono or stereo plugsPassive device (No power required)Cold-rolled steel housing. Two Year warranty.
30. Hughes & Kettner FS2 Footswitch for Triplex and Tour Reverb
Sentiment score: 0
Number of reviews: 1
Heavy-duty FS2 footswitch controls dual functions on your Triplex or Tour Reverb
31. JJ Electronics Amplifier Tube (T-12AX7-S-JJ)
Sentiment score: 1
Number of reviews: 1
12AX7 vacuum tube,U.S. Product Code: 12AX7European product Code: ECC83For guitar and Hi-Fi amplifiers,Can be used in any preamp or microphone application
32. Palmer Audio Interface (PAL-PLI01)
Sentiment score: 0
Number of reviews: 1
Passivebalanced/unbalanced input/outputTransformer balanced
33. Whitmor 4 Tier Chrome Supreme 4 Tier Adjustable Shelves and Leveling Feet-350 lb. Capacity per Shelf, 4-TIER
Sentiment score: 1
Number of reviews: 1
Whitmor supreme shelf holds up to 350 pounds per shelf (evenly distributed)Durable steel construction that is NSF CertifiedLeveling feet & grid wire shelves that adjust in 1" incrementsAssembled dimensions: 14.0 x 36.0 x 54.0 inchesEasy assembly, no tools requiredProvides storage for kitchens, attic...
34. Furman Power Conditioner, Silver (PST-6)
Sentiment score: 0
Number of reviews: 1
Advanced surge suppression with zero ground contamination offers superior protection over a standard power stripCable satellite and Telco connectors deliver advanced protection to connected equipmentCompact design enables discrete placementSturdy Aluminum chassisFrom the #1 brand in professional pow...
35. Danelectro Electric Guitar Mini Amplifier, Aqua (N10A)
Sentiment score: 1
Number of reviews: 1
Great clean and overdrive tones (Best with Polaroid 9V Batteries)Leather handleBelt clipHeadphone jackColor: Aqua
36. EMINENCE LEGENDV128 12-Inch Lead/Rhythm Guitar Speakers
Sentiment score: 1
Number of reviews: 1
Classic British rock guitar tone Very mellow but with lots of definition and rich tonal harmonic balance Medium break-up modes Very smoothA very balanced speaker with lots of definition and rich harmonic detail More mellow than most Red CoatsIdeal For Classic Rock and Blues
37. Marshall MS2 Battery-Powered Micro Guitar Amplifier
Sentiment score: 1
Number of reviews: 1
Battery Operated (Best with Polaroid 9V Batteries)1 WattVolume & tone controlHeadphone jack0.34 lbs.
38. CRC 05103 QD Electronic Cleaner -11 Wt Oz
Sentiment score: 1
Number of reviews: 1
Quick drying, plastic safe formula leaves no residueIdeal for applications where lower flashpoing materials can be toleratedHelps prevent contact failureThis item is not for sale in Catalina Island
39. Behringer V-Tone Guitar Driver DI GDI21 Amp Modeler/Direct Recording Preamp/DI Box
Sentiment score: 1
Number of reviews: 1
Analog guitar modeling preamp/stompbox with DI recording outputThis BEHRINGER product has been designed to compete head to head with leading products on the marketAuthentic V-TONE modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations. Easil...
My personal favorite is the Orange Micro Crush. It has decent volume, actually has pretty good tone once you dial it right, and most importantly, doesn't buzz. It also accepts a 9v power cord.
The only other one I have tried was the Danelectro N10. It was horrible. I mean absolutely awful. Terrible tone no matter what the knobs were set to, and buzzed constantly. And by buzz, I mean, every single piece in this thing would rattle around every time you played a note. Also, if you played too loud, it would just cut out. I spent 5 minutes attempting to get my money's worth out of it, and then took out the battery to save for my Micro Crush.
The next one I want to try, because I have an obsession with these little things now, is the Roland Micro-Cube. I've heard nothing but good about it, even though for that price, you could have a significantly larger practice amp.
Edit: I know what I said about the Roland, but I just got the Pignose 7100 as an impulse buy, while at GC for another impulse buy. I have a problem, I know. So this amp is, first of all, really cool looking and solidly built. Second, it requires 6xAA batteries instead of the usual 9v. ...Also, it seems to have a different 9V adaptor port than all other micro-amps and pedals I own. The tone is pretty good, up there with the Orange and I would say even clearer, and you can open the back for a more airy, spacey sound. I like this amp alot, and it may replace my love for the Orange.
There are tons of reasons, it could be bad grounding in the amp somewhere, it could be capacitors or tubes gone microphonic, etc, (Not sure if it's tube or solid state). Do you have a good power filter on the amp and pedals? I don't know what is the best out there, but I have a furman like this: https://www.amazon.com/Furman-SS6B-Plug-Surge-Protector/dp/B0002D017M/ref=sr_1_3?ie=UTF8&qid=1475258359&sr=8-3&keywords=furman+power+conditioner that I like. that may be all you need, but I'd suggest at least looking to replace your tubes also, see if one is microphonic (You can also test this by getting a pencil and gently tapping hte tubes to see if you get weird noises in the tube when you do it. There are a few good videos on the internet showing microphonic tube testing.
Mojotone, Weber, BYOC, Ceriatone, Marsh, TubeDeopt, Allen Amps, Mod Kits DIY, BrownNote, Mission Amps, Trinity Amps, Triode.
More information would be helpful. What style of amp are you looking at? What type of music will you be playing through it. What type of cabinet, speakers and tubes did you buy? Where are you located? How handy are you with a soldering iron? Have you ever built an amp before?
If you are a noobie, I'd suggest you get the Dave Hunter book "Guitar Amplifier Handbook - Understanding Tube Amplifiers and Getting Great Sounds". Super useful.
For $30, this little thing takes care of the whole problem for you: https://www.amazon.com/BEHRINGER-V-TONE-GUITAR-DRIVER-GDI21/dp/B000CZ0RKG
Three different voiced preamps - fender, Marshall, and boogie - and variable cab sim and built in active DI, and effective baxandall tone stack. It's a little noisy if you turn the gain up but for a backup amp solution it's great.
I used an Eminence Legend V128 https://www.amazon.com/gp/product/B000BBDBEU
I would have probably be more patient putting it all together, I rounded corners and inner edges of the front frame before putting the grill cloth, it would have looked better had I waited a bit.
I used a combination stain and polyurethane finish but I wish I had just given it an oil finish... I could still do that but that would required not playing with it for some time and I'm really enjoying it...
It looks like parallel wiring so...maybe not cheapest way (if you have a soldering iron then definitely not cheapest) is to hook this up (I bought this for a 2x10 cab I built after I found the speakers had only 2 tabs not 4):
​
https://reverb.com/item/5704954-earcandy-2x12-guitar-amp-speaker-cab-parallel-wiring-harness-w-jack-cup-hardware-already-soldered
​
If you don't mind it (the connection) being outside you could use a spade bit to make the hole in the lower panel and put this in...you still need to make the internal speaker plug so I guess soldering iron is required.
​
So you are connecting this to the white and black wires before it goes to the speakers by cutting that wire coming out of your amp and solder the spliced end of something like this...
https://www.amazon.com/Genuine-Fender-Replacement-Internal-003-8566-049/dp/B07HY7562T/ref=pd_cp_267_2/135-2771638-8671050?_encoding=UTF8&pd_rd_i=B07HY7562T&pd_rd_r=964ee13b-9535-46d0-9d04-770e20160a5c&pd_rd_w=B1hC6&pd_rd_wg=8kObF&pf_rd_p=0e5324e1-c848-4872-bbd5-5be6baedf80e&pf_rd_r=9NQK3BR8T94XD5HYGYZ8&psc=1&refRID=9NQK3BR8T94XD5HYGYZ8
​
I can double check this tomorrow and try to think it through so don't order anything yet.
​
***You could also just buy something like this and then solder the wire parts that you leave on the speaker clips to this (about 14 dollars cheaper than the ear candy thing on reverb) :
https://www.amazon.com/Black-Speaker-Plate-Round-Switchcraft/dp/B0716NH7XZ/ref=sr_1_2?keywords=input+speaker+jack+guitar+plate&qid=1573768232&sr=8-2
I was able to solve this by removing the tubes and using DeoxIT on the pins. Careful not to get any on the glass; it will remove the ink markings. Some fine sandpaper on the pins might help, as well.
EDIT: Re-typing my reply after I've had a chance to reread yours.
It is like the TOP image on your drawing. Just like this, the linked image is "before" on the left, "after" on the right. The AC power connects to both ends of the Primary wiring. Sorry if that wasn't clear before. DO NOT rewire anything about the PT secondaries that go to the tubes.
But, just the fact that you asked, says you really should do more homework before you continue, I think you're rushing this without having a real understanding of how the amp, and AC appliance in general, work.
At the very least, I would pick up Dave Hunter's book, which explains the amp workings in layman's terms. But there is a LOT of recources out there to get yourself more up to speed.
I've got this one:
Marshall MS2 Battery-Powered Micro Guitar Amplifier https://www.amazon.com/dp/B000BVS7WQ/ref=cm_sw_r_cp_apa_i_RZgWDbDG3GV6G
If you turn everything to max it sound ok for a pocket amp, but anything less is too little. Also, the clean channel might as well not exist.
Contact cleaner, $4.77 @ Amazon, but you can buy at probably any store like Lowe's.
CRC 05103 QD Electronic Cleaner -11 Wt Oz https://www.amazon.com/dp/B000BXOGNI/ref=cm_sw_r_cp_api_m1G9Bb2YS6DMT
And the place on the pot to spray it (about halfway down on the page)
http://www.mtdkingston.com/thezone/repair_and_maintenance.html
I think you mean tonebone. But, I used the bigshot to AB my two amps through one cab, works great. It also has a phase lift so you won't get that horrible buzzing.
https://www.amazon.com/Radial-BigShot-True-Passive-Switcher/dp/B000FKIO6M/ref=pd_lpo_sbs_267_img_0?_encoding=UTF8&psc=1&refRID=GSBYWND9SXP2K5773XKR
Very complete answer, thanks man!
I'll order a T-12AX7. Is this one okay or are there subtleties about ''Medium gain'' that I should look into?
I did as you suggested with the single battery powered pedal in the loop, and it seemed to get rid of the hum. I then plugged the pedal back into the original pedal chain in the FX loop and the power conditioner and lifted the ground as that video described (I put a 3 prong to 2 prong adapter in between the power supply and the power conditioner) but there was still hum when I did that. If I buy an isolation transformer, like this where would you recommend putting in in the loop? Before or after the pedals?
I use these: Whitmor Supreme 4-Tier Shelving with Adjustable Shelves and Leveling Feet Chrome https://www.amazon.com/dp/B0007MHD1K/ref=cm_sw_r_cp_api_iRqVAbMB5FT87
This is most likely the problem. I have the combo version and it does this in my living room. Older house where there are a few circuits for the whole place. Dimmer switches, anything with a motor, etc can add interference to a circuit. Try a different room. I recently got a few power conditioners to help eliminate the noise. Not a surge protector strip, a power conditioner. Amazon has some that aren't crazy priced ($55. Furman Power Conditioner, Silver... https://www.amazon.com/dp/B0009GI65Q?ref=ppx_pop_mob_ap_share)
I would try it first after the pedals and before the FX loop return.
I would recommend the Ebtech, it's cheaper than the Palmer and it's got two channels so you could isolate before and after the pedals if need be. They would both do the job though.
Hosa GPP-151 1/4 inch TS to 1/4 inch TS Right-Angle Adaptor https://www.amazon.com/dp/B000068O45/ref=cm_sw_r_cp_apa_qpxwybHV4QGW1
Should work and is cheap.
I've used this table to stack two combo amps: https://www.amazon.com/dp/B0006D50RO/