Top products from r/HondaElement

I put a cargo net between the two hooks in the cargo area to keep grocery bags from sliding all over the place.

This guy put a net on the ceiling to store blankets and stuff - I haven't done this, but I want to sometime

I got one of these from harbor freight and put it in the back - it fits perfectly between the backseat and the hatch. Into that I put a tire inflator and jumper cables from harbor freight, and a first aid kit from Amazon

I also did a mod that keeps the rear 12v socket on when the car is off so I can inflate the rear tires without turning the car on

I haven't installed one, but the U-haul trailer hitch for the element bolts straight in, so I want to get one of those sometime

Another thing I'm planning on doing soon is replacing the hatch struts with these because my hatch won't lift itself all the way up

I also replaced all my lights except headlights with LEDs - I can link all those here later if you want - I'd definitely recommend doing the map lights, you can get a huge brightness boost on those if you want. The rest of the lights aren't much brighter than the incandescents, but they use a lot less power and you can get colored or cool white lights if you're into that

Edit: I remembered some more stuff I did

I added these floor mats from Walmart - it's like $15 for a set of two. They keep dirt and gravel from getting everywhere and help keep my feet from sliding around

Another harbor freight addition is this clamp that I use to hold down the door switch if I want to keep the radio on with the doors open. This disables the beeping and is a lot easier than finding a plastic screw or wiring in a relay and button. It also fits perfectly in the drivers door pocket

Only my second time doing it, so I'm no expert.

I bought the Mequires clay kit.

Washed the car thoroughly.

Dried with a chamois.

Started with the roof because it's the hardest part, it had tree sap and would require additional work, and I'm putting a roof rack on soon.

You want to do this in the shade for many reasons, but the biggest reason is you want the panels cool so the spray solution stays on the panel longer. It's a lubricant of sorts so the clay slides easier.

Work the clay over the entire panel, spraying more solution as needed. I recommend doing small sections at a time.

Periodically wipe the section down with the supplied microfiber cloth and inspect your work. You should feel an obvious difference between a clayed area and an untouched area.

Once you've completed the job, apply wax so the paint is protected. I have always used carnauba paste waxes so I stuck with Meguiar's Gold Class. Paste is more difficult to apply but I feel I get better application than liquid.

I also mask off the edges of the plastic and trim because wax is a PITA to remove from them. And I can be a little sloppy with the application.

I'll try and get some before and after close-up pictures when I do another panel.

I can confirm
I bought these Sachs SG225002 Lift Support https://www.amazon.com/dp/B000WO4JPQ/ref=cm_sw_r_cp_api_i_PrqUCb3A7ZQKP
They fit perfectly on my 07 EX, and add a bit of extra height (what I wanted so I can walk under it) but I have to be careful not to get hit in the face as it opens VERY strongly

Qty (2) StrongArm 4325 1998 To 2010 Rear Hatchback Lift Supports Struts W/O Spoiler https://www.amazon.com/dp/B007RVQYI2/ref=cm_sw_r_cp_apa_i_0RiUCbDKH81JV

Fit my 03 EX perfectly.

It was my first time driving with the kayaks loaded and strapped down so I took it easy. About 30 miles at 60mph. When I got off the freeway I checked how secure the straps were and everything held nicely.

I bought these kayak racks.

Bought one of these. Pricey but easy to put on and I haven't thought twice about it. I would recommend it.

Genuine Honda 08P33-SCV-100 Seat Cover https://www.amazon.com/dp/B001EEC45A/ref=cm_sw_r_cp_awd_B.R8wbWJMSXQ4

After using different products found at auto parts store, an auto detailer recommended this: https://www.amazon.com/gp/product/B006NZRAFE/ and it's been the best and longest lasting so far.

I put this on my 03 with 155K, like another poster I did also have to replace one of the 02 sensors but has been fine since. https://smile.amazon.com/gp/product/B07QVWR1GB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/Coleman-2000020271-ComfortSmart-Camping-Cot/dp/B0075D2J2C/ref=pd_bap_m_rp_26?_encoding=UTF8&pd_rd_i=B0075D2J2C&pd_rd_r=c6b8fb29-f4fc-4072-a296-cf576827bbda&pd_rd_w=sxOTy&pd_rd_wg=JEZ9y&pf_rd_p=7092fda7-28a2-4e44-9254-b40e2cad6f55&pf_rd_r=PV2PC48QE537J45PC87H&psc=1&refRID=RNZCKBMFT2QHPA60TYR4&th=1

If you take the back seats out this fits behind the passenger seat nicely. And you can put boxes underneath. However you won't be able to stretch out on it if you're taller than 5'4"

It’s not a Honda part, this is what I bought. Install was quick and easy, and raises the clearance a few inches so you don’t hit your head.

Kwiksen 234-9064 234-4733 Heated... https://www.amazon.com/dp/B01I28UF1U?ref=ppx_pop_mob_ap_share


Catalytic Converter for 2003-2011... https://www.amazon.com/dp/B07QVWR1GB?ref=ppx_pop_mob_ap_share

I got these and no CEL return, just passed emissions in OR!!

I highly recommend you get the OEM exhaust “donut” gasket over aftermarket. I spent about 3 hours trying to get an aftermarket one on, OEM slipped on like butter...

I've heard good things about this stuff for faded trim: https://www.amazon.com/Wipe-New-WN6PCMSTRRT-Trim-Restorer/dp/B00AYXM4DY

In a pinch you can also use foam tire shine, but it will only stay on for a couple days.

They're on Amazon for around $50. Dorman 748-131 Honda Element Front Driver Side Power Window Regulator with Motor

No problem!

Head Unit

Wiring harness

Double Din Mounting Bracket

Antenna Adapter

• You may not need this.
  
  Backup Cam
  
  Android Auto / Apple Car Play Adapter
  
  
• required if you want android auto/Apple Car Play to work. Eonon makes other units that do not require this adapter.

I installed the replacement clip, it's looks identical to the original. I still struggled to get it to go in properly, but it seems to be in place. If you want to buy some the link is below, and if you live in the US I could probably be talked into shipping you a handful of them for just the shipping costs.

https://www.amazon.com/Honda-Interior-Push-Type-Clips-91550-S50-000ZL/dp/B0040CWVBU

I used these magnets:

25 Round Disk Magnets Crafts Home Office Part 3/4" https://www.amazon.com/dp/B000RB7E5Q/ref=cm_sw_r_cp_api_i_zE05Ab3C2ZD5N

And this screen
Shatex Fiberglass Door, Window Screen, Fiberglass Mesh Insect Barrier, 48"x84" https://www.amazon.com/dp/B01NBHWRDH?ref=yo_pop_ma_swf

And just cut the screen to size and magnet it on. Cheap and easy. Got the two front windows, sunroof and extra from this.

https://www.amazon.com/Cuisinart-CPT-180-Classic-4-Slice-Stainless/dp/B0000A1ZN1/ref=sr_1_6?keywords=toaster&qid=1568900555&s=gateway&sr=8-6

These are the LED headlights I used.

Stock bulb Vs LED

And this is the USB.

USB installed

Just ordered this one. We'll see...

https://www.amazon.com/Bushwhacker%C2%AE-Barrier-Smaller-Restraint-Backseat/dp/B0076A0M6Y/ref=mp_s_a_1_3?keywords=Bushwhacker&qid=1556424130&s=gateway&sr=8-3#

Also not cheap I use the Ram Mount X-Grip: https://smile.amazon.com/dp/B0066BWMNU/ref=cm_sw_r_cp_awdb_t1_dtMwCbFD2QK3H