(Part 2) Top products from r/Nerf

Jump to the top 20

We found 108 product mentions on r/Nerf. We ranked the 1,095 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/Nerf:

u/Jangular · 1 pointr/Nerf

Ok, apologies for the length of this post, but I want to give you multiple options and reasons for them.

Loadout 1 - Flywheels

Target
Rapidstrike Holiday Bundle - Normally I would recommend a stryfe as a starter blaster over this, because the rapidstrike usually needs some level of modding to reach it's potential, but since the holiday bundle comes with 2 18 clips rather than 1, I feel that since you're essentially getting the rapidstrike and 2 clips for the same cost as a stryfe and 2 18 clips then it warrants looking at. Should you prefer the smaller form of the stryfe and the semi auto rather than full auto, then you can get that and 2 more of the 18 dart clips linked below from amazon.

Hammershot - If you want a secondary, this is the way to go in my opinion, since you can use it with one hand and it just is a great platform.

$60~ Shipped

Narrowbase
Nmag Clip Holder - These clip holders are fantastic and not super bulky, giving you quick and easy access to your clips while wearing a belt. Certainly an investment, but a worthwhile one.

Belt Loop Adapters - Same as the clip holders, but for your hammershot.

Belt Loop Adapters - These are to use your clip and hammershot holders on your belt, meaning you don't need to buy a molle platform. Choose size according to belt width.

$70~ Shipped

Amazon
[Extra Clip](http://www.amazon.com/N-Strike-Elite-18-Dart-Quick-Reload/dp/B0083TXZCA/ref=sr_1_20?s=toys-and-games&ie=UTF8&qid=1421366408&sr=1-20&keywords=nerf
) - Having extra clips is near essential to avoid having to constantly stop and reload your clip. Since the Holida Rapidstrike comes with 2, another clip on top of that puts you at 3 which is a decent start.

$11~ Shipped

Ebay
Koosh Darts - These are the go to darts for affordable and effective darts. They're more accurate than elite streamlines, but you might encounter some that have quality issues. Overall the price and accuracy is worth the occasional bad dart.

$20~ Shipped

Total - $161~
I know that's a little over what you listed, if you needed to be firm on the $150, you could drop the hammershot and holster, pick up another clip and a single clip holder from Narrowbase and I think that should be closer to the $150 mark.

Loadout 2 - Springer

Amazon
Rampage - The rampage is a good springer platform to start with, and the extra ammo capacity is always a plus.

[Extra Clip](http://www.amazon.com/N-Strike-Elite-18-Dart-Quick-Reload/dp/B0083TXZCA/ref=sr_1_20?s=toys-and-games&ie=UTF8&qid=1421366408&sr=1-20&keywords=nerf
) - Same reasons as loadout 1 except buying 2 this time rather than one.

$52~

Blastersmiths UK

MkI Battle Belt - This is in my opinion a good molle platform since it has built in clip holders, with molle space you can build on. Also since it isn't a full vest it isn't as bulky or restrictive.

Large Dump Pouch - Something that I wasn't able to squeeze into the other loadout, and was less necessary because the NMAGS can serve as a storage for used clips as well. Basically this just gives you a place to quickly drop used clips when switching out. This is more necessary for this loadout because you have the drum that comes with the rampage you need somewhere to drop.

Molle Attachment Bars - These are used to attach your dump pouch to your battle belt or molle platform of choice.

$75~

Ebay
Koosh Darts - Same as the first loadout.

$20~

Total - $147~

This loadout has some different gear than the first because I wanted you to see two different ways you could go with a loadout, so don't be afraid to take aspects from one to apply to the other, it's all about finding what works for you, this is just what I would go with if I had that kind of budget, because I feel like having good gear is just as important as a good blaster, because having reliable and quick or easy access to your clips is important in games, especially HvZ, which I have no idea if that's something you intend to play or not. Anyways, I hope this gives you a good starting point! If you have any questions on why I picked certain things, let me know!

u/Meishel · 6 pointsr/Nerf

I run this instead of a Dremel brand tool. I have had a couple Dremels die on me over the years, so I tried this one and it has lasted 4 years so far! I also got a lot of my bits from harbor freight. I use the cuttoff wheels (ALWAYS WEAR FACE PROTECTION WITH THESE), Sanding Drums, and grinding stones the most. Use the cutoff for cutting out large swaths of material, sanding drums for tighter areas, and grinding stones to debur and smooth it all out. Most work that needs a dremel can be done with hand tools for better control. Coping saw, files, and flush cutters can go a long way. A lot of the "pros" don't use Dremels because they can jump out of control and hit a part of the blaster you planned on leaving stock and leaving a huge gash.

As for soldering Irons, I've heard wonderful things about this model, but cheaper models will work fine. TBH, I'd grab something in the $10 range and see if he sticks with the hobby. Maybe for christmas you can get him a nicer one if he's still going at it. I use a super duper old school Weller soldering station, so really anything will work. The issue you'll get with the cheaper soldering irons is the tips will tend to not last long and the heating element might crap out after a few months. Don't go cheaper than $10 here as some of them are meant for wood engraving, not soldering and wont get hot enough to melt solder. Any size solder is fine. I personally use lead/tin solder and just avoid breathing fumes as well as wash my hands when I'm done modding. Lead solder is MUCH easier to work with and requires less heat. Look for "Rosin Core solder" as it's easier to work with as it has flux in the center of the solder.

Good flush cutters, hobby knife, wire strippers, heatshrink, wire, loctite, etc are all valuable modding supplies. We sell some on our shop (shameless plug). I would recommend for plastic to plastic bonds he use Devcon Plastic Welder (make sure it contains Methyl Methacrylate as this acts as a solvent weld to bond the plastics together chemically instead of a weak adhesive grip like putty). Putty should be used as a filler material. I use two different putties. Free form Air for large amounts of gap fill, it is 6 times less dense than normal putty so it wont make the blaster weight 8 pounds when done. It is VERY easy to sand, but sometimes requires a thin layer of bondo over top of it to leave a perfect finish. I also use Apoxie Sculpt which is a direct replacement for normal putty for gap filling purposes. It's MUCH easier to sand than JB Weld putty, and leaves a nice smooth finish when sanded down.

Speaking of sandpaper, get various grades of sandpaper from 100 down to 600 grit (I go as far as 1000 if I want a gloss sheen on something).

Other than all of that, the tools I have on my bench that I would hate to mod without now are: Helping hands (for soldering), various different sizes of needle nose pliers, numerous sizes of small to medium screwdrivers, silicone lubricant, hot glue (for securing wires inside the shell), Electric Screwdriver, and various tweezers.

u/Salty_Chemist · 5 pointsr/Nerf

Oh baby my time to shine. Easily my favorite blaster!

So I recently purchased and received this shell for my sledgefire after seeing another review on it.

It's fantastic. Drop in, no other mods needed, gets unreal shots out of it with the darts he supplies as well (10 short stefans, looks to be cut down VTN or FVN). Still manages quite a punch with elite darts as well!

Also, the MTB sledgefire guide linked by another comment is wonderful, and the spring they mention is this one.

I can honestly say that even without a spring replacement, the shell I linked earlier, as well as the seller's longer range kit (has a 200 mm brass insert, same length as MTB for their sledge) is a wonderfully easy drop in and have fun. He even has multiple color options for the shorter barrel options! Give it a shot, you won't be disappointed.

TLDR: Get this shell and have fun!

u/ben827 · 1 pointr/Nerf

What you could do is get a Vendetta Sword. It breaks into two swords, so then you have one for you and one for your friend. You can also try the ZombieStrike Blade, but I think it's more cost efficient to get the Vendetta Sword. Also, the Marauder Sword is no longer in production and the likeliness of finding one for a reasonable price (or 2 as you requested) is rather slim. eBay is the place to go for the Marauder Sword. You can get the Vendetta Sword on eBay. I hear it actually is quite durable.

I'm kinda happy that I got my Thunder Fury swords back in 2008 before they were put out of production for less than $20 now that I know they're up to $150 each.

Here's a link for the Vendetta Sword. Amazon probably doesn't have the best pricing, but it's an option. Do some searching. And waiting. Prices can go down if you wait with Amazon.

Heres a link to the ZombieStrike Blade, I recommend waiting to buy this, I got one for $12 not too long ago. Prices can rise or drop.. It's basically a newer version of the Vantage. Here's a better deal from Target for $12.99 each. If you're looking for 2, I'd recommend getting that. I hear Target is offering some good deals this weekend, so I'd take advantage of that if I were you.

Nerf swords typically don't have incredible durability, but they cost a hell of a lot less than many LARP swords. I recommend this site if you're looking for high quality swords. It's super expensive, though. And if you don't want to go out and buy foam and stuff to make your own, I suggest finding deals on Nerf swords. It's a cheaper and less time-consuming alternative.

See what I mean about the Marauder?. The pricing is crazy. Note: Those links were from mobile, just click to go to the main site if you're having any issues.

u/entrluzrnaam · 3 pointsr/Nerf

If you can get a good balancing charger and can be responsible and safe with it, a lipo will definitely be better than IMRs as far as performance goes. If you do go with lipos, you should probably get a better rev switch.

Here's a good rev switch:
https://www.amazon.com/SODIAL-Microswitch-V-156-1C25-plunger-action/dp/B00K67YO8G/ref=sr_1_2?ie=UTF8&qid=1496202242&sr=8-2&keywords=15A+microswitch

And here's a great lipo:
https://www.amazon.com/ZIPPY-Compact-1000mAh-Lipo-Pack/dp/B00TDCDKLW/ref=sr_1_1?ie=UTF8&qid=1496202444&sr=8-1&keywords=zippy+compact+1000mah+3s+25c+lipo+pack

u/murse_joe · 4 pointsr/Nerf

I'd say buy a Nerf Hammershot It's pretty easy, it's a five shot revolver. It's got a hammer to cock instead of a slide, so you can prime and fire it one handed. Easy to still have a drink or hold on to something, or you can dual wield. It's pretty cheap, takes most any dart, and is a lot of fun to cock like a revolver.

There's also the Strongarm and the Disruptor. They're both six shot revolves, slide primed so harder to dual wield but they're solid and you won't have any problems running them, and they take pretty much any dart. If you ever played with a Maverick when you were younger, they're basically the modern equivalents.

EDIT: the Hammershot is actually on sale on Amazon. You can also grab them cheap at Walmart or Target.

u/Mistr_MADness · 2 pointsr/Nerf

Awesome! Recommend you use Meishels for your Demolisher. Run them off a proper Lipo. If you don't have a charger, get a charger. I use the IMAX B6A2. Wire everything up in roughly the same way MTB did their super Stryfe. Use Foamblast's rewire kit, a 10 amp Cherry switch and a voltage alarm/meter. Oh, and get good balanced flywheels, either Hooligan's or Worker's.

u/FC-TWEAK · 7 pointsr/Nerf

> Is it a good deal?

Sledgfire is a ton of fun, but can be a pain to reload if you only have the 3 shells. Stock ranges are pretty crap, a C-836 is a welcome upgrade. Stock Sledgefire spring fits the BoomCo Farshot/Halo M6, making it a powerhouse.

Or you can single the Sledgefire using MTB's awesome guide.

u/Hawki007 · 1 pointr/Nerf

Sweet. Keep us up to date on the ammo counter! Get this, stuff works great =)

u/ThunderKrunk · 1 pointr/Nerf

The nerf rebelle 4victory is actually a great choice. Smaller than the hammershot and more reliable. It is as fast and as easy to load as the triad and can be primed with one hand.

u/RevelHalcyon · 3 pointsr/Nerf

Yeah dude, just straighten them up and use some epoxy as Dogmai781 said, or better yet, some plastic welding methyl methacrylate such as this guy, my personal favorite.

https://www.amazon.com/Devcon-22045-Plastic-Welder-Dev-Tube/dp/B003NUGL9S?ref_=fsclp_pl_dp_5

u/dangman4ever · 5 pointsr/Nerf

The classic cheap recommendation for mag holders is the VISM NcStar AK Chest Rig. Costs around $20 shipped if you have Amazon Prime ($16 shipped if you're willing to buy the used Camo from Amazon Warehouse Deals) and can fit six 18 dart stick mags just fine. It even has side pouches that you can use to store a Hammershot:

https://www.amazon.com/VISM-NcStar-Chest-CVAKCR2921B-Black/dp/B005G0FADG/?th=1

As for dump pouches, this pouch has been working out pretty well for me:
https://www.amazon.com/gp/product/B005WUDRN0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/bs1110101 · 7 pointsr/Nerf

Yep, but generally only when it's a new mod.

I have a pneumatic toilet plunger i've attached a barrel to, and i call it the Doompistol, seeing how powerful it is and it's a huge pistol. In wars it's generally shotgunned to shoot 2-4 darts at once, as with enough pumping, it can still outrange most of everyone.

There's also the BAAM! Drain Blaster which i've nicknamed the Bigger Blast, as it's very similar to a Big Blast, but well, huge. This one i plan to make into a single shot rifle type thing with a rate of fire much higher then that of the blunderbuss-esque Doompistol. This likely means adding a pressure relief valve, or unscrewing the airtank and filling a lot of it with something to take up space, as without doing either, i expect it would be powerful enough to be instabanned.

u/foam_data · 2 pointsr/Nerf

Carrying blasters- A simple one or two point sling works great for primaries. Holsters are available all over from loads of places for carrying secondaries.


A basic Molle vest or battlebelt offers great flexibility if you want more overall coverage.

Mag pouches and pod holders offer belt mounting for less money.

Lots of other gear on the gear up database.

Avoid all the Nerf or PPG gear, it's awful.

u/torukmakto4 · 1 pointr/Nerf

Devcon Plastic Welder

info

hardware store/retail example packaging

...And other similar products (methacrylate plastic welding adhesives) like Loctite Plastic Bonder and Permatex Plastic Weld.

They are FAR more suited to doing anything with ABS and PVC than any epoxy, since:

  1. they actually do WELD, since the methyl methacrylate monomer in the uncured resin is a solvent for many plastics; thus preparation is unimportant and bond integrity is inherently way better than any epoxy can possibly match

  2. unlike hardware store epoxies, they are tough and impact resistant when cured, and match the mechanical properties of ABS and PVC well, for a seamless and low-stress bond

    The stuff is one of my most indispensable tools as a modder.
u/Yowomboo · 1 pointr/Nerf

Any adhesive using methyl methacrylate (MMA) will work.

Devcon Plastic Welder Link

Loctite Plastic Bonder. It MUST SAY "Plastic Bonder" This stuff. Another link The loctite plastic epoxy without the word bonder on it doesn't work on the same materials. It inconveniently comes in the same color packaging.

I'm pretty sure there are others available but I don't know their names. If you look at the packaging and it says methyl methacrylate you should be good to go.

/u/Raviable

u/Myvenom · 3 pointsr/Nerf

Ok good because I’d recommend this stuff. It’s very easy to work with and fill holes. A little tip is to wet your fingers down after it’s pretty much in place and smooth it out. It takes awhile to set up but after that a little sanding and paint away.

u/megachainguns · 2 pointsr/Nerf

FYI: Nerf is coming out with a new modulus style longstrike that shoots elite standard fps. It's pretty expensive though, 70 bucks (on Amazon).

u/DarconRenozyle · 5 pointsr/Nerf

I ended up using a rig like this for a year when I mained my Zeus.
Condor M4 Mag Pouch - MOLLE

If you don't use Molle, I used the same rig with this belt:
JT Paintball Pod Holder

I did add some tubing to make them friction fit and they never fell out while running.

I was able to hold 4 12-round sticks easily with this setup and used it for a long time.

You can see how it holds up here in one of our videos (I'm the guy w/ the green bandanna).

u/mikejonas · 3 pointsr/Nerf

http://www.amazon.com/Nerf-Rebelle-Secret-Shot-Blaster/dp/B00NCZZJ6U/

http://www.amazon.com/Nerf-Rebelle-Secrets-Mischief-Blaster/dp/B00NBVTFZ6/

http://www.amazon.com/Nerf-Rebelle-4Victory-Blaster-Set/dp/B00NBVTG7I/

Also, on the Super Soaker front, a new listing for something called a "Microburst 2" (and is probably a mere remold of the original three shot piston squirter nah, looks like a straight-up squirt gun like the crap from last year; the original Microburst at least had a nice piston pump for its size) but is actually branded and packaged as the "ZombieStrike Extinguisher": http://www.amazon.com/SuperSoaker-Microburst-Blaster-Water-Soaking/dp/B00MXT4Y8U/

u/BLU_X3V2 · 1 pointr/Nerf

Or Amazon.ca i have had luck getting TRU to price match Amazon

$32 Nerf 100

$23 XCsource 100

$30 Ekind 100

u/wynevans · 1 pointr/Nerf

I use these in UCP for both paintball and Nerf. They hold 2 pods or 4x18's perfectly, and will close, albeit barely, over the 18's. Academy sports has them for ~$12.

u/Omneya22 · 3 pointsr/Nerf

Amazon has sentinels for sale for $40 right now. I may just grab me one of them then =)

u/New2Nerf · 5 pointsr/Nerf

The dart and Rival round packs are also on sale, which should be compatible with the free dart promotion at NerfPerks.

u/Virisenox_ · 2 pointsr/Nerf

Strongarm, Disruptor, or Hammershot: Great cheap pistols. Not great for modding though.
Retaliator: A basic mag-fed rifle with that's been modded by a lot of people.
Stryfe: Semi-auto battery powered mag fed flywheel blaster. Not great stock, but it has a huge modding community.
Stratohawk: Full auto flywheel blaster. Comes with a 25 round drum. Very usable out of the box.

u/rmoekzmoyai9 · 1 pointr/Nerf

TRU will price match from amazon.com . They have the cycloneshock listed for $22, so you can save $8 and still get it in person.

u/TheOnionBro · 2 pointsr/Nerf

They're a bit expensive, but worth it.

Note: that's a U.S. Amazon link, so it might not work for folks in other countries.

u/Kyhan · 3 pointsr/Nerf

There is a $20 kit that replaces the handle and all of the internals for better ones, but it's been discontinued. Currently it's only available on amazon for around $35.

u/BorisMoreso · 2 pointsr/Nerf

The Elite Alpha Trooper or Retaliator (or Recon MKII if that's easier to find) will be most different from what he already has, being larger magazine-fed blasters. If you think you may mod them in the future, lean towards the Retaliator/MKII as it's a little sturdier.

As u/The_Backwoods_Nerfer pointed out only having one magazine can be tedious, but you can buy an extra flip clip or banana mag on Amazon fairly cheaply.

u/Lordsquiggles7 · 5 pointsr/Nerf

Here's the best mod [kit] (https://www.amazon.com/Nerf-N-Strike-Elite-Rampage-Blaster/dp/B00DW1JT3I) that maintains shell aesthetics. Price has gone up lately, but still is reliable.

You don't even need a dremel.

u/iCANhazRECON · 4 pointsr/Nerf

For 12-round mags specifically, you can never go wrong with the Modulus Flip Clip kit. They frequently sell for ~$12 (currently on Amazon for $15), guaranteed to work with Nerf blasters, and the grey piece can be added or removed for two 12-round mags or a single jungle mag/"flip-clip"

u/flibby404 · 12 pointsr/Nerf

Right now the Nerf Delta Trooper is $20.49 plus tax on Amazon, maybe slightly over budget, but it's got magazine compatibility and slam fire. A Mediator is also a springer with slamfire, but it's magazine feeds out from the side and it is pump action, and is sold without any attachments and a small magazine (6 rds). I would recommend going to Ross though, as they sell quite a few magfed Buzz Bee blasters that are cheaper (~$8) such as the Reaper and the new Revolution. I also found a Retaliator there (more recommended for modders, but since you do not plan to mod, the Delta Trooper is a better choice due to having slamfire) for about $16. The Nerf Alpha Trooper is also on clearance at Kohls for only $7.50, but there's $9 worth of shipping (at least for me) plus tax, so it really isn't that cheap.

The Strongarm (also available in fancy colors) and Disruptor are a decent plinkers for $10 ($13), but their more inexpensive alternatives are the Dart Zone Blitzfire Two Pack for $13, the Adventure Force Destructor for $7 and the Xshot Reflex 6 two pack (or one pack if you can find it) for $12 currently but $16 msrp. The Destructor and Reflex are the same things made by the same company but sold under two brands: their own and the Walmart one, under different colors.

For the Double-drum revolvers, there is the Nerf Flipfury, the Adventure Force Hyperspin, and the Xshot Xcess (note that the levers on the Hyperspin/Xcess just release the cylinders and don't completely rotate them, while the Flipfury's mechanism does completely swap the cylinders). The two larger blasters in the Dart Zone Commando Iconic 4 Turbo Dart Blasters are also multi-drum, but are the worst in the group and resemble the old-model Xshot Xcess.

A Dart Zone Magnum Superdrum is also only $20, and gives you a 40 shot cylinder with slam fire, but it's misgivings is that is it very loud because it doesn't have air restrictors, and the plastic feels a little bit on the cheaper side and is super creaky. The $25 Xshot Turbo Advance and Adventure Force Superdrum (again, same blasters different brand and color, Turbo Advance is usually $30 but it's on sale right now)

Some other $20 or under offerings from Adventure Force are the Double Trouble, Havoc Powerclip, and Quatroblast. The Double Trouble is a good flywheel blaster, but the Quatroblast is known to sometimes not rotate properly and the Powerclip uses proprietary clips but is a decent blaster otherwise.

This is accurate as far as I know as of October 1st, 2019 CE as of 5:52 UTC. Props to you if you read the whole darned thing.

u/high_meme_lord · 1 pointr/Nerf

Recently I finished a 3S Rapidstrike build:

Motors

Microswitches

Some wire

a lipo battery

Also tools, like a soldering iron or a dremel (i don't have a recommendation here, i just use a hobby knife).

My stock flywheels recently gave up the ghost, so I replaced them with some Worker flywheels.

The only other thing that comes to mind right now are flywheel cages: consider one of these 3D printed ones from the Open Flywheel Project, or an Artifact Red cage + flywheels.

u/ahalekelly · 2 pointsr/Nerf

Devcon Plastic Welder.

It's strong stuff, but I don't think it's this strong.

u/Thingymrbob · 4 pointsr/Nerf

Is this the "larger" one? Also the one OP linked has more than enough power for any sane person, I wouldn't even worry about wanting more.

u/FarMoreBadass · 0 pointsr/Nerf

I believe you want this one: www.amazon.com/BAAM-87000-Drain-Blaster-Cleaner/dp/B00HPMPPWY

u/garvisdol · 2 pointsr/Nerf

I think K26 itself only comes from McMaster.

I have read/heard (I think from Captain Xavier on youtube) that the following spring is supposed to be K26-like. I bought some, but I haven't used them yet.

https://smile.amazon.com/gp/product/B000BQOUIQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/morpheus1229 · 2 pointsr/Nerf

Century Spring C-836 - Sledgfire spring, used in MTB's guide.

u/[deleted] · 1 pointr/Nerf

I think they've been found at Target. It's on Amazon.com.

u/rumpletuffin · 2 pointsr/Nerf

You can get a CycloneShock For cheaper here

u/Megashockman · 2 pointsr/Nerf

Modulus Flip Clips?

They're $10.50 for two 12s (they come attached but you can separate them) along with 24 elite darts.

Just so you know, the clipazines that come with the Modulus Flip Clip are entirely opaque (not see-through), and have tabs along the sides that you can see in the picture.

u/The_Backwoods_Nerfer · 1 pointr/Nerf

Amazon. I know it is a bit pricey, but they are still available.

u/Umikaloo · 1 pointr/Nerf

It was a longstrike with an Orangemodworks upgrade kit. You can buy the modulus longstrike now, which make the OMW kit redundant.

u/collegenerf · 1 pointr/Nerf

There was a zombie strike sword, but it is a little different than the Marauder

u/foambrewer · 3 pointsr/Nerf

You guys have hardware stores in Canada, right?


Seriously, though, I just googled "drain blaster canada" and got this as my 1st result, so I'm sure they're out there...

u/K2TheM · 2 pointsr/Nerf

I must be confused about how switches are rated. This was is listed as a 15A rating. Which should be adequate right? Or maybe you were meaning that for the given size of the switch it could have a higher amp rating?

u/MeakerVI · 4 pointsr/Nerf

I think this is the one that everyone usually reccommends. It's got a 3x2 mag configuration, map pouch, two utility pouches. Not sure if it also has drings or points for blaster and radio, but you could probably rig something up.

I'm not in Aus so I can't confirm availability there.

u/nucleartime · 1 pointr/Nerf

You can try buying some of the premade Chinese ones. They probably work a lot better than 3d printed ones. Though firing faster than ~140fps is going to chew through your darts no matter what flywheels you use.

The worker ones:
https://www.amazon.com/Modified-Plastic-Flywheel-wheel-Accessories/dp/B015NAF588

You can get them for less if you wait for China shipping.

The aluminum Artifact ones (Get the smooth ones):
https://world.taobao.com/item/541683021215.htm?spm=a312a.7728556.2015080705.17.VjnPnE&id=541683021215&scm=1007.12006.46753.i525734658219&pvid=f4d21363-e097-43b0-83fa-0c9353cacc8d

Though you'd probably have to do some machining to get them on outrunners.


Also, what's the kV of the motors you're using? Depending on the diameter of the flywheel you'd probably need 30-40k RPM to get max velocity.


u/LamoidZombieDog · 0 pointsr/Nerf

from what i can see, the rampage is basicly just a Drop smaller newer version of the cs-35 raider? they look very similar.. and no, im not attached to that gun specificaly, im just trying not to spend a ton of money, and since thats the only gun i had and got it for 5.00 i figured id mod that..i found this https://smile.amazon.com/Nerf-N-Strike-Rampage-Blaster-Exclusive/dp/B00DW1JT3I/ref=sr_1_1?ie=UTF8&qid=1537811713&sr=8-1&keywords=nerf+rampage for 31.89 then theres also a sonic ice version for 60 which i wouldnt be buying https://smile.amazon.com/NStrike-Elite-Rampage-Sonic-Blaster/dp/B00UMZEKU4/ref=sr_1_2?ie=UTF8&qid=1537811713&sr=8-2&keywords=nerf+rampage so ill think about buying the rampage, suppisvely it shoots 75FT without mods?
i see it doesnt come with a stock which is kind of od.. i could always use my Raider one until i buy the mod one..
is that gun much smaller at all then the cs-35 raider? i like having the big long gun and having one thats drasticly smaller would suck
it seems a lot smaller but it could be because it doesnt come with a stock

u/bookchaser · 3 pointsr/Nerf

My experience with garage sale and thrift store Nerf guns is that 9 out of 10 of them are jamming problems. That's a non-starter if you're not prepared to repair them.

I chose the N-Strike Elite Disruptor as the gun to buy in bulk so every kid has a shooter.

It's $10 on Target too, and this week Target has a sale: $10 off $50 purchase, $25 off $100 purchase of eligible toys and games. Nerf is eligible. So that's 7 six-shooters for $75.

I opted for a 400 pack of ZTOZZ darts. Maybe a hardcore Nerf fan can tell you why cheap knock-offs are bad, but I've noticed no difference in shooting accuracy or distance, and it's not as if you'll be that worried about these issues in a birthday party war.

A group in my area that hosts Nerf war events in community halls and school gyms makes structures for players to hide behind using U-Haul-style wardrobe boxes (big moving boxes) that are held together with binder clips (the boxes are clipped together flat, not kept in cube/box form). I can dig out a photo if you're interested.