Top products from r/Phanteks
We found 35 product mentions on r/Phanteks. We ranked the 35 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P)
Sentiment score: 1
Number of reviews: 7
Asus Aura ReadyCompatible with upcoming motherboards with 4pin RGB HeaderAllows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software.Customize and colorize your LED strip and case LED with the use of the moth...
2. Phanteks PH-CBRS_PR22 – 220mm Premium Shielded High-Speed Technology PCI-E 3.0 x16 Riser Cable, 90o Adapter
Sentiment score: 0
Number of reviews: 2
Over 64GB/s via rare shielded twin-axial wires and dedicated power lines for lossless signals at range.Flexible sectional design allows for aggressive orientations and better airflow.Quality hand soldered gold-plated contacts for signal integrity.Individual laneway shielding prevents external EMI/EF...
3. WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V
Sentiment score: -1
Number of reviews: 2
INDIVIDUALLY ADDRESSABLE. You can control each LED individually! Yes, that's right; this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with Fast...
4. Waveshare 7inch HDMI LCD (C) Capacitive Touch Screen Display Supports Various Systems for All Ver. Raspberry pi 3 Model B/3 B+ 2B/B+/B/A BeagleBone Black Banana Pi/Pro Video Photo Kit
Sentiment score: 0
Number of reviews: 1
1024x600 high resolution,capacitive touch control,supports Raspberry PiSupports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian imagesSupports BB Black, comes with Angstrom imageFor other mini-PCs, driver is required and should be developed by usersNot only for mini-PCs, it can work as a comput...
5. Funtin PCIe Riser Cable, 3.0 x16 PCI Express Riser Extender, Flexible High Speed 180 Degree GUP Riser Cable (25cm)
Sentiment score: 1
Number of reviews: 1
♦ FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH - Deliver all the performance of PCIe 3.0 to your GPU. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT, RX VEGA 56, RX VEGA 64 etc, support for all graphics cards produced after 2015.♦ EXTENDED & ANGLE...
6. Phanteks Halos 140mm Digital LED Fan Frame, Black (PH-FF140DRGBP_BK01)
Sentiment score: 0
Number of reviews: 1
There is no compromise on performance. Even high-quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated.Light is spread evenly thanks to high density Digital LED’s and diffuser.Daisy chain all of Phanteks’ Digital RGB products together.Sync the Digital RGB L...
7. DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
Sentiment score: -1
Number of reviews: 1
If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only...
8. 24 Pieces Set = 24-pin x 4,8Pn x 12,6-pin x 8 Cable Comb for 3 mm Cable Gesleeved Up To 3.4 mm/0.13inch) black,CM245
Sentiment score: 2
Number of reviews: 1
High quality PC cable comb3 different type comb: GPU 6Pin(3+3)x8, GPU 8Pin(4+4)x12, motherboard 24pin(12+12)x4;Fits 3.4mm silver plated cables or bare wireKeep your cables in a good managementPackage Contents: 24-pin *4, 8-pin *12, 6-pin * 8
9. RGB LED Light Strip 4 Pin Splitter - 5 Way Splitter for LED Tape Light (1 to 5 Splitter Cable (Black))
Sentiment score: 1
Number of reviews: 1
1 To 5 Splitter Cable For LED Light Strip1 End to Connect With LED RGB Controller, The Other Ends for 5 Rolls LED RGB StripsCorresponding to the number of plug adapter :6Good Installation Replacement for Connection Strips and ControllerEasy to Install,Durable Material
10. Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1
Sentiment score: 0
Number of reviews: 1
Compatible with most GPU/motherboard componentsRedesigned for improved compatibilityPCI E x16 3.0 compatible with 200mm cable lengthEMI shielded design reduces interference1 year Warranty
11. Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included
Sentiment score: 1
Number of reviews: 1
UNIVERSAL TRIPLE MONITOR DESK MOUNT: Fits 3 displays 24 25 26 27 28 29 30 31 32 inches in size, with a maximum support weight of 15.4 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure distance, in millimeters, between bolt holes in ...
12. Phanteks PH-LEDKT_Combo: RGB LED Strip Combo Set - Retail Cases
Sentiment score: 1
Number of reviews: 1
Our Phanteks RGB LED strips are extremely bright and are currently compatible with the Enthoo Luxe, Mini XL, Evolv ATX TG, and P400/P400S. M/B with 4pin RGB LED header (+12V, G,R,B) is compatible with PHANTEKS PH-LEDKT_COMBO.Phanteks RGB LED strip has integrated magnets in the silicone housing allow...
13. 3-Pin Fan Cable Y Splitter Extension with Black Sleeving & Black Connectors (6" Length)
Sentiment score: 0
Number of reviews: 1
Black Sleeving & Black Connectors6" LengthOne Female 3 Pin Fan ConnectorTwo 3 Pin Male Fan ConnectorsNote: Only one 3-Pin male connector has a tachometer/speed wire. This is because motherboards/fan controllers cannot accurately read the fan speed when two speed signals are being given simultaneousl...
14. Phanteks 24 Pin/ 8pin (4+4) M/B, 8pin (6+2) PCI-E Extension Cable Kit 500mm Length, White (PH-CB-CMBO_WT)
Sentiment score: 1
Number of reviews: 1
Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMaxConnector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female24 Pin/ 8pin (4+4) M/B, 8pin (6+2) PCI-E Ex...
15. LED Light Cable - TOOGOO(R) 1 to 2 Female 5 Pin Flexible Connector RGBW LED Strip Splitter Cable White
Sentiment score: 0
Number of reviews: 1
1 to 2 5 pin female connection cable for LED RGBW strips.Easy to install, connecting strip to strip, strip to controller.One end to connect with LED RGBW controller, the other end for 2 LED RGBW strips.
16. Waveshare 7 Inch Capacitive Touch Screen LCD(C) 1024 X 600 HDMI Interface Display Shield Panel Supports Raspberry Pi/PC/Various Systems/Raspberry Pi4 3 Model B
Sentiment score: 0
Number of reviews: 1
1024X600 high resolution,Supports Raspberry PiSupports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images;Supports BB Black, comes with Angstrom imageFor other mini-PCs, driver is required and should be developed by usersNot only for mini-PCs, it can work as a computer monitor just like any...
17. ELECROW 5 Inch Raspberry Pi Screen Touchscreen 800x480 TFT LCD Display HDMI Interface for Raspberry Pi 4B 3B+ 3B 2B+ BB Black Banana Pi Windows 10 8 7
Sentiment score: 1
Number of reviews: 1
5 inch HDMI display with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.It is resistive touchscreen monitor which comes with a touch pen f...
18. SilverStone PWM Fan Hub System Cables, Black (CPF04)
Sentiment score: 1
Number of reviews: 1
1-to-8 PWM connectors2200μF capacitor provides stable voltageSupport speed detection for accurately controlling fans
19. EVGA G2/G3/P2/T2 100-CW-1300-B9 Power Supply Cable Set (Individually Sleeved), White
Sentiment score: 1
Number of reviews: 1
Color: White.High quality with no visible heat shrink tubing. Supports G2/G3/P2/T2 models ONLY1 x 24-pin ATX Cable2 x 4+4pin EPS12V CPU Cable4 x 6+2pin PCI-E VGA Cables2 x 6+2pin + 6pin PCI-E VGA Cables4 x 3 SATA Cables1 x 3 Molex Cable1 x 2 Molex Cable + 1 Floppy Connector
20. Noctua NF-A14 iPPC-2000 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
Sentiment score: 0
Number of reviews: 1
Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTFAward-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency12V 2000rpm model (31.5dB) with 4-pin PWM connector for au...
> So... I think you're saying you don't need to drive anything but the LEDs built into the case, correct? And you specifically want to do it via software, not hardware?
Right. I was just asking whether the case lights (the 4 RGB strips and the RGB ring around the power button) can all be Y-connector-ed to one 12v header, or if that's too much to be putting on one header for voltage or current reasons. And yes, I want everything to be synced up in Aura.
> Generally, but isn't the JST SM connector 3-pin, rather than 4-pin? It is on my case, but it's possible you have something else.
The JST SM connectors coming out of the lights on my case are 4-pin, and Phanteks website (and Amazon) offers a cable that adapts this to the more standard 4 pin RGB connector. So it looks like I'll need two of those (the top cover and front panel lights are each already Y'd together, so you have one wire coming out of each) which I'll then Y together using a splitter with standard RGB connectors at both ends.
> I thought you meant general instructions for a wide range of hookups. If you just meant more comprehensive than they have now, I'd definitely agree with you.
I mean, even just a simple diagram of the RGB contoller's connections and a few notes about what the channels do would have been very helpful. I have no idea how this guy figured out what needs to be connected to what other than simple trial and error.
I just bought the Modmesh Pro RT series (for Seasonic PSU's) kit, so they are all just standard length from their website. There is a little slack behind the cable cover in the back, but not a ton. The only one that's really too long is the molex cable for the pump, and to get the DRGB and the fan hub, and the two drives, and the temp sensor I have is 5 sata power, and the default one comes with a 4 and a 2, so I had to use both, the 4 is a little long, but not too bad, though the 2 is obviously more than I needed for the 1 extra sata power.
And then I bought a couple of these for cable combs as they looked the most like the Cablemod ones: https://www.amazon.com/Pieces-24-pin-8-pin-Gesleeved-0-13inch/dp/B0756XF5ZQ/ref=sr_1_1_sspa?keywords=cable+combs&qid=1570029329&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExS0xMWExHMkhJMVlaJmVuY3J5cHRlZElkPUExMDQwNjI2MzY4Q0pBWDhDTjVYVyZlbmNyeXB0ZWRBZElkPUEwNTczOTg0MjdGWFRYRk8ySDZOWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Okay, like you can see in my photos, I have the lux and the exact same Mobo. That adapter will work just fine.
If you want an adapter plus 2 LED strips that is another option as well.
Sure. Just like this 1. There are a few variants. Yes between psu and shroud.
https://www.amazon.com/Elecrow-RPA05010R-800x480-Display-Raspberry/dp/B013JECYF2
I've only heard great things about the EVGA cables set. If i wasn't trying to save i'd be getting that instead of the Phanteks extensions.
​
EDIT: I got black and going for heavy white lighting and the cables are hopefully going to add a bit more visibility inside. Plenty of colors available from Phanteks and a few from EVGA too !
Did the change the fab hub from the old Evolv ATX? If so, that's a shame. I recommend this one if you plan to use a different one or go towards the splitter route.
Sure, it's this one from MountIt
https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_em_apa_i_2bjXDbEFW9P3D
Looks like it got even cheaper than when I bought it.
Oh gotcha. The one I saw on amazon was without a case.
Waveshare 7 inch 1024*600 Capacitive Touch Screen LCD Display HDMI Interface Custom Raspbian Angstrom Supports Various Systems for All Ver. Raspberry pi Beaglebone Black Banana Pi/Pro Video Photo Kit https://www.amazon.com/dp/B015E8EDYQ/ref=cm_sw_r_cp_api_80OUBb01M6Y1V
If you buy this adapter you can control your case's lighting via Asus's software and the mobo's RGB connector.
I'm using a HUE+ with my Evolv TG and while the standard set of strips don't fully circle the window (they make a 'u' for about 2/3 of the total distance, I'd guess), I'm still pleased with how it looks (in that photo you can see on the upper-left where the LED strip ends, just shy of the top of the 120 rad).
I bought something like this to connect everything.
https://www.amazon.com/LED-Light-Cable-Flexible-Connector/dp/B01FLRU1BO/ref=sr_1_12?s=electronics&ie=UTF8&qid=1526892160&sr=1-12&keywords=rgbw+5+pin
I recommend that you purchase our https://www.amazon.com/Funtin-Extension-Express-Flexible-Extender/dp/B07VJ5PB5Q, which meets your requirements.
​
And if it is not appropriate after you receive it, you can return it whitno reason.
Same dimensions as this one I'd imagine.
This is the IPS version which is almost certainly what is optimal for this use case considering the better viewing angles of IPS — I don't plan to have my case pointing right at me.
You think these models would fit inside the PSU shroud but not the one with the case? I never bothered measuring because Amazon returns are so easy, but I got charged like $7 this time which is kind of a bummer.
Yeah, but could you only use the one from them? What about the on from Thermaltake or did Phanteks made the holes so you can only use their?
Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1 https://www.amazon.com/dp/B06Y5YNGDJ/ref=cm_sw_r_cp_apa_o7gYBbPAE5SDM
There is a "SL" part and a "PR" part. The "PR" designates it as their "premium" cable. It has the individual ribbons of insulated cable as opposed to one single ribbon. The screw hole placement looks VERY similar to the Lian Li riser cable they sell for the O11 case.
I kept checking Amazon until it showed it was in-stock, which took about 3-4 days.
https://www.amazon.com/Phanteks-PH-CBRS_PR22-High-Speed-Technology-PCI/dp/B07H7MHHP6/ref=sr_1_2?keywords=phanteks+riser&qid=1551379815&s=gateway&sr=8-2
I purchased 4 of these fans (3 in the front / 1 in the back) https://www.amazon.com/gp/product/B00KFCRMSG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I have all my pieces, my 2080 ti comes in today but still waiting for the case >:(
Dont have an evolv but for the p400s i had to use one of these. https://www.amazon.com/Phanteks-Adapter-Specified-Control-PH-CB_RGB4P/dp/B01BZIBJAK
You’ll need this to plug into your mobo’s led pin, the other end will be used for rgb accessories.
Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) https://www.amazon.com/dp/B01BZIBJAK/ref=cm_sw_r_cp_api_rtgiAbYQEQ4DB
If you have a phanteks case with an LED controller then the halos can go in there. If not, you'll need an adapter cable to connect it to your motherboard which you can find here.
Edit: I should add, the halo lux rings come with the adapter I think.
You bought "wrong" strip and wrong halos.
These are standard strips and standard halos, the 12V RGB.
Your EVOLV X case is meant to be used with ADDRESSABLE lighting, so Digital halo this one https://www.amazon.com/Phanteks-Halos-140mm-Digital-PH-FF140DRGBP_BK01/dp/B07BGWLH14
And WS2812B addressable strip like this https://www.amazon.com/Programmable-Aclorol-Individually-Addressable-Raspberry/dp/B07BKNS7DJ
or this (if you want to overpay for Phanteks overpriced strips) https://www.amazon.com/Phanteks-PH-DRGBLED_Combo_01-Digital-Adapter-Compatible/dp/B07C1ZFRWW/
With these, then everything will check out. And you will be able to sync both your case with halo, strip and motherboard.
If you don't want your current purchase to go to waste (or can't return it), you need to purchase this https://www.amazon.com/Phanteks-Adapter-Specified-Control-PH-CB_RGB4P/dp/B01BZIBJAK/ and then you can connect HALO's and strips to your motherboard 4-pin 12V G R B headers but then, they wont sync with case, as case has to be connected separately to ADD_Header (5V data GND).
Check page 22 and 23 of case manual.
No, that’s the complete kit. I was referring to the cable only: https://www.amazon.com/dp/B07H7MHHP6
Well, i found the probem, it is the fucking fan-hub. The white header is kind of defect. I ordered five silent wings 3 140mm and every fan connected to the white header makes stranges noises and spins slower than the other four:
https://youtu.be/sF8T_Ofohr8
I ordered a fan-hub from amazon (deep cool) and now everything works like a charm.
I read that is fan-hub problem is very common on the evolv x, since the release. So did i get an old produced case or is phanteks lazy as shit? Damn, my nerves...
I have the Evolv X and Asus Hero Z390 with 2 x HALO just added and WS2812B strip bought from Amazon but not installed yet.
​
Two questions: