(Part 2) Top products from r/RBA

Jump to the top 20

We found 20 product mentions on r/RBA. We ranked the 75 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/RBA:

u/Aedalas · 0 pointsr/RBA

While those will certainly work I'd suggest getting a better torch setup. Something like this and thise. I've went through a 1 lb tank (slightly bigger than what I linked) since I started with RBA's around 6 months ago, I can't imagine how much butane I would have went through in that time.

u/prettymatthew · 2 pointsr/RBA

http://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=sr_1_1?ie=UTF8&qid=1419911642&sr=8-1&keywords=cellucotton+beauty+coil

Prices look like they've gone up since the summer. If there is a Sally's Beauty Supply near you, they sell it too. That's where I got my 500' box for $13.

u/zombie_overlord · 1 pointr/RBA

I use one of these. I usually use a plate for a work surface & just clip it to the side. Pretty helpful.

u/Stheno · 2 pointsr/RBA

I use this Xuron Flush Cutter for wires/kanthal/silica and it cuts through anything like butter. Xuron makes great tools with lifetime warranties.

u/oheysup · 1 pointr/RBA

This is all I know of, probably the one you've already seen at the craft store. http://www.amazon.com/gp/product/B0068RQ85K/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

Other than that there's some fisherman sets like this http://www.amazon.com/gp/product/B000TBPT5Q that could be useful i guess.

u/flat4gt30 · 1 pointr/RBA

This is concerning, the nominal voltage range for an 18650 is 3.6-3.7 and the maximum voltage on a full charge might hit closer to 4.3v. What charger are you using, and what volt meter.

I would still recommend picking up a true multi meter, it dosen't have to be a fluke or a klein, just something that gives an accurate reading.

u/squired · -2 pointsr/RBA

It's called Noalox. I don't personally use it anymore though. It doesn't make that much of a difference and gets gunky/attracts sand very quickly. You have to constantly clean your mech if you use it. I prefer all-purpose teflon silicon-based lubricant.

Pickup either at HomeDepot/Lowes. Noalox is in the electrical department and other lubes are in next to the glue, maybe in the paint department.

u/MisterWinchester · 1 pointr/RBA

You could probably build one out of green stuff: http://www.amazon.com/Games-Workshop-Green-Stuff-Modelling/dp/B000FCLTY4

But I don't know how well it'll hold up. Alternatively, you could just get a Kayfun v4 and be done with that bottom filling ridiculousness for good. ;)

u/fsckin · 1 pointr/RBA

Xuron 170-II Micro-Shear Flush Cutter

Doubles as a hangnail remover in a pinch, and vaping toe jam sounds like a bad idea. :)

u/BiloxiSucks · 2 pointsr/RBA

https://www.amazon.com/Keychain-Screwdriver-Diagonal-Tweezers-stainless/dp/B07FPDRXQJ

One of the reviews says his wire cutters broke. I haven't used them yet but they don't feel that flimsy. And he also said he couldnt return but it shows I can so I don't know. I've used everything else in the kit and it works just fine. The scissors are the fold up kind and they work to but I just use regular scissors.

u/derkafer · 1 pointr/RBA

Proxxon makes a bitchin' mini press...

www.amazon.com/gp/aw/d/B0017PUR1Y

u/Bradart · 1 pointr/RBA

I use this guy but, admittedly, I do a lot more than just measuring coils with it.

u/cheapguitar · 2 pointsr/RBA

I've made stands for various devices out of air dry clay. Cover the device with saran wrap and smoosh it down into a block of clay. wiggle it around a little so it will have a little space for play and let it dry a day or so. Paint or leave plain.

u/DustForVomit · 6 pointsr/RBA

You most likely won't be able to find the correct screws at the hardware store. You can try a hobby shop or just order them online.

The post screws for the kayfun are stainless steel M1.6x3mm pan head

Not sure about the screw size for the patriot/clones, but the standard size that all of those 3 post drippers (nimbus, all the igo stuff..etc) use is M2 x .04. I would just buy some new stainless steel ones from Amazon