(Part 2) Top products from r/RX8

Jump to the top 20

We found 12 product mentions on r/RX8. We ranked the 31 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/RX8:

u/NotAPreppie · 1 pointr/RX8

Nothing yet. I've been toying with the idea of doing a quick DIY on RX8Club.

I've got a pair of modified banjo bolts tapped with 1/8 NPT fittings in them. I have a K-type thermocouple intended for EGT measurement installed in the bolt on the front cover and a 150 psi pressure transducer in the return line. A second 150 psi transducer is installed in an Aeromotive fuel line adapter. A MAX6675 thermocouple analog-to-digital adapter lets the Arduino Uno measure the temps. A 20x4 LCD displays the values numerically.

I taught myself how to code the Arduino and make everything work in about 6 hours on a Saturday. The hardest part was trying to figure out the LCD and MAX6675 connections. I can upload the libraries and sketches somewhere if you want to copy my work.

Edit: look at that, it was already on my google drive... https://drive.google.com/open?id=19xV31SIuhSC76IQSWpr959vSRQg1Xekv

​

Edit2: Wow, looking at my code... I even documented things like what each line does and where to connect wires. I don't remember doing it but if drunk me wants to be a good programmer, I'm okay with that.

u/Dracs · 1 pointr/RX8

It’s behind the glove box, which drops out to give you access. It’s super easy. YouTube video shows how here:
https://youtu.be/9VXpG4Cslr0

Got the new filters on amazon.
https://www.amazon.com/dp/B0010ECUL2/ref=cm_sw_r_sms_c_api_bd6HAbSM03AB4

u/jaydubsvape · 1 pointr/RX8

I believe that fuse in particular is a 30A pink female maxi (FMX) fuse. Here's one on amazon: https://www.amazon.com/Bussmann-BP-FMX-30-Female-Maxi/dp/B000BXMEWS

Pretty much any auto shop should have it too.

However, I read in a couple spots that the ACC fuse being blown prevents your car from starting too.. I'm not sure how true that is, but this is the only fuse I could find that shares all the components that aren't working. I guess the quick check is to just pull that fuse and see if it starts up. If it won't start up after pulling that fuse, that means that it does indeed run the ignition, and that fuse isn't the problem. :(

u/KWheelr · 1 pointr/RX8

http://www.amazon.com/NGK-RE7C-L-Laser-Iridium-Spark/dp/B000GZEU64/

http://www.amazon.com/NGK-RE9B-T-Laser-Iridium-Spark/dp/B000AUP2VW

Much better price, and they are legit, I bought some earlier this year. And I also recommend the BHR coils.

u/Lknate · 3 pointsr/RX8

I had the same issue. The clutch pedal was broke and master cylinder was shot. Got a both on Amazon. Judging by the age of you car it is possible it is just the master cylinder. I got the rebuid kit and it was pretty straight forward. https://www.amazon.com/Dorman-CMK116394-Clutch-Master-Cylinder/dp/B001PYG6PS?keywords=rx8+clutch+master&qid=1536430333&sr=8-5&ref=mp_s_a_1_5

u/marcthedrifter · 3 pointsr/RX8

I used to use Lucas Oil Upper Cylinder Lubricant for about a year. Seemed to make the idle better. Been without it for about 6 years now though, and I haven't noticed a difference besides the idle.

u/SharpieInThePooper · 3 pointsr/RX8

I changed my starter and battery when I changed my coils and plugs. Starts instantly now and there's no more hot start issue.

The starter was cheap, like $100. Don't buy the starter from Mazda, they quoted me $400 for it. But the battery was about $160. Just make sure your battery has enough power.

Here's the battery I got

Optima Batteries 8020-164 35 RedTop Starting Battery https://www.amazon.com/dp/B000MS9VZK/ref=cm_sw_r_cp_awd_kCy-wb2GSERYB

u/i0nicx · 2 pointsr/RX8

I picked up a 3M kit, here's the link

u/clairvoyant5190 · 2 pointsr/RX8

Did you completely destroy the flywheel? With typical wear, it should be able to be resurfaced without issue.

As for clutches, go with the OEM or Exedy kit (same thing, basically). I got mine from Amazon: https://www.amazon.com/gp/product/B001B59OUU/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Just went through this 3 months ago when the throwout bearing took a dump.