Top products from r/SigSauer
We found 22 product mentions on r/SigSauer. We ranked the 68 resulting products by number of redditors who mentioned them. Here are the top 20.
1. SigTac Magazine Pouch fits SIGP226 and P229, 9mm
Sentiment score: 1
Number of reviews: 2
Rotates 360 degrees for every application (small of back, cross draw, etc.)Fully adjustable for magazine tension and cantAdjusts with simple Allen keyManufactured using durable, black polymerFeatures a paddle back and gives you a comfortable, contoured fit
2. Safariland 6378, ALS Concealment Paddle and Belt Loop Combo Holster, Fits: Sig Sauer P320 9mm, .40 Full Size, Black - STX Plain, Left Hand
Sentiment score: 0
Number of reviews: 2
6378-450-412 Fits: Sig Sauer P320 9mm, .40 Full SizeALS (automatic Locking system) Secures your weapon once holstered and allows a fast drawThis holster rides close to the body for easy concealmentSafariLaminate construction makes the holster strong on the outside, while SafariSuede on the inside pr...
3. Galco Concealable Belt Holster for Sig-Sauer P239 9mm (Black, Right-Hand)
Sentiment score: 0
Number of reviews: 1
Made using the finest materialsUsed by Law Enforcement, Military, and citizens alikeTested for durability and qualitySIG-SAUER P239 9mm
4. Hoppe's No. 9 Cleaning Kit with Aluminum Rod, Universal .22-.225 Caliber Rifle/Pistol
Sentiment score: 0
Number of reviews: 1
Plastic Jag and patchesPlastic slotted tip phosphor bronze brushSqueeze bottle lubricating oilOne 3 piece aluminum rod with T handleHoppe's No. 9 cleaning kit with aluminum rodIncludes one 4 ounce. bottle cleaning solvent and one 2 1/4 ounce. lubricating oilBrush for the intended caliber is included...
5. for Sig P365 Magazine Base Plate Finger Extension Black NDZ - Plain
Sentiment score: 1
Number of reviews: 1
Fits 10-Round Magazines ONLYAluminum Finger Extended Floor Plate for Sig P365 - BlackPlain Black - No Logoreplaces stock plastic plate, quick install, requires NO modificationsAll our accessories are Made in USA, in our facility
6. Galco Pocket Protector Pocket Protector Size PRO664B Holster, Black
Sentiment score: 0
Number of reviews: 1
Steerhide materialSize PRO664BPRO664B GALCO pocket Protector size PRO664B holster
7. Hogue Sig P226 Grip W/Grooves 26000
Sentiment score: 1
Number of reviews: 1
rubber grips are molded from a durable synthetic rubberrubber is not spongy or tacky but givers that soft recoil absorbing feeldoes not effect accuracymaterial used does not come apart or deteriorateresistant to all solventsand oils
8. Safariland, 6280, SLS, Level 2 Retention Duty Holster, Fits: Sig Sauer P220, P226, Mid-Ride, STX Tactical Black, Left Hand
Sentiment score: 0
Number of reviews: 1
6280-77-132: Fits Sig Sauer P220, P226Level 2 retention, Mid-Ride sits just above the beltSLS (Self Locking System) Rotating Hood for protection against attempted takeawaysTop draw and straight-drop cantSuede lining helps protect weapon’s finish
9. Hogue Sig P239 Grips (Checkered Aluminum), Matte Black Anodized
Sentiment score: 0
Number of reviews: 1
Fits: Sig Sauer P239Checkered DesignColor: BlackP239 Grips
10. Hogue Extreme G-10 Grips (Fits: Sig Sauer P226)
Sentiment score: 0
Number of reviews: 1
Fits: Sig Sauer P226Style: Checkered G-10Color: Solid BlackG-10 Grips
11. Wall Control 30-P-3232GV Galvanized Steel Pegboard Pack
Sentiment score: 1
Number of reviews: 1
More than ten times stronger than conventional pegboard and 32in Tall x 16inGalvanized steel pegboard panels accept slotted, stable, and more secure hooks, pegs, brackets, and shelvesSteel panel prevents the pegboard holes from fraying and wearing out over time. For mounting into concrete, we would ...
12. Racers Edge 3000 1/2-Ounce Bottle W Needle Tip
Sentiment score: 0
Number of reviews: 1
Racers Edge designs quality hopups and accessories for your RC vehiclesMade from high quality materialsFor use with a variety of RC hobby products
13. HYSKORE 1003626 Parallax Pistol Sighting Rest
Sentiment score: 1
Number of reviews: 1
Made of highest quality materialManufacturer: HyskoreHyskore Parallax pistol sighting rest
14. Slim 25” Durable Telescoping Magnetic Grabber/Retrieving Magnet with Pocket Clip (07228)
Sentiment score: 1
Number of reviews: 1
VERSITLE: Helpful for retrieving objects in the home, shop, office or garage.STRONG: Neodymium rare-earth magnet with 3-lb pull rating.DURABLE: Designed for regular use without breaking including a sturdy aluminum extension wand and solid construction at stress points.USEFUL: Simplify your work and ...
15. Hogue Hunting Grip Sig P226/P228 Screws, Hex, Black
Sentiment score: 1
Number of reviews: 1
Package length: 0.4 cmPackage width: 5.5 cmPackage height: 8.6 cmProduct Type: SCREWS
16. Bianchi 82 Carrylok Hip Holster - Size: 13A Sigarms P220/P226 (Black, Right Hand)
Sentiment score: 0
Number of reviews: 1
FingerLok quick middle finger release for Auto Retention and securityStay-open design for easy one handed re-holstering15-degree forward cantFits belts up to 1.75"FingerLok release lever provides speed and security for quick middle finger release of firearmStay open design for efficient one-handed h...
17. Hoppe's Boresnake .357, 9mm, .380, .38 Caliber Pistol and Revolver, Clam E/F
Sentiment score: 1
Number of reviews: 1
Multiple short brushes embedded in the floss pass easily through the shortest action or portInitial floss area (inside the barrel) removes loose grit and debris prior to the scrubbing action of the brushMain floss, with 160 times more floss than a patch, super cleans the boreBrass weighted drop-thro...
18. Hogue Sig P239 Grips W/Grooves 31000
Sentiment score: 0
Number of reviews: 1
hogue rubber grip 31000fits sig sauer P239 rubber grip with finger grooveshigh qualityresults in much superior gripmaterial used does not come apart or deteriorate and is resistant to all solvents and oils used around firearms
This may be on back order but if you look hard enough it’s not to hard to find them south of $120 and reserve one. Something to think about and I am gonna slap the TLR 7 in my p320c and that TLR 1 on my P226. Also, if you want to protect your light from getting dirty when you take it to the range I recommend getting a flip cover for it. Throw it on for practice at the range and then take it off for regular use to have a clean light when you really need it. Happy shooting man, stay safe, and nice piece.
TLR - 7
https://www.lapolicegear.com/st-69420-tlr-7.html
Streamlight 69117 Flip Lens for TLR Series Lights,
Green https://www.amazon.com/dp/B000WO6JEU/ref=cm_sw_r_cp_api_2krIAb8DJ4ZBD
I bought the TacOps and love it. I also conceal it just fine and I'm skinny as fuck. I'd definitely go for the TacOps. Any P226 is a mighty fine firearm, but the Mk25's distinguishing appeal is a little anchor and the phosphate coated internals. The anchor is useless and the internal coating isn't anything you'll need unless you're wading through saltwater on a regular basis. I love the beavertail on the TacOps and the SRT is great -- very accurate follow-up shots. Personally, I'd also try out the Hogue Rubber Finger Groove Wraparound Grips. They're perfect for me and many others I've spoken with. Also, as far as mags go, I got some MecGar flush-fit 18-rounders.So, with those as well as the grips (thus, reducing overall height) it becomes much more concealable. So, again, I say TacOps all the way.
I would guess the odds of you messing it up would be low. I have completely taken apart my ppq, my hk p30, my glock, my m&p, an SKS, and a mosin nagant without any formal training or special tools. All of the guns were successfully put back together and work perfectly now (although I no longer have the SKS or mosin). Guns are pretty simple mechanically, it's not like I'm some mechanical wizard. If you decide to go the route I suggested, you can PM me and I'll take some high resolution photos of the interior finished product so that you know what to look for. My big issue was that I couldn't figure out what direction one of the pieces was supposed to go. Luckily, my parents own a sig so I grabbed theirs and used that as a basis for me doing mine. If I send you a few pictures, you should be able to figure it out. There are some YouTube videos that are also pretty helpful.
Edit: if you are going to install the SRT, you might wanna get this. You'll understand why once you get started. There is one piece that you have to put in that is fucking impossible to get in place without a magnet thing. I did it without one and... holy shit was it a pain to get the sear into place because it kept slipping out of place and my fingers are big so I couldn't really hold it in place. On YouTube, a lot of people had this tool and made it look so easy. Retrospectively, I REALLY wish I had this before I got started. https://www.amazon.com/gp/aw/d/B0000DINDG/ref=mp_s_a_1_2?ie=UTF8&qid=1479832614&sr=8-2&pi=SY200_QL40&keywords=magnet+stick&dpPl=1&dpID=31y82P6%2BWOL&ref=plSrch That was the only part of the install that was frustrating. I could have done it in 3 to 5 minutes if it wasnt for that sear... That took me half an hour. If you have that magnet. You'd be able to do it in a manner of minutes. If you get one, don't get one of those with a really wide magnet. Get one like in the link that is small so it can fit into relatively tight spaces. You'll thank me later.
I wrote this review on one:
The NDZ Magazine Extension for P365 is Wonderful. Here's my Review
Ordered this 5 days ago from Amazon and it was in my mailbox this afternoon. Currently $22.99 with free shipping, they come in several color options and with optional laser engraving designs. I went with black and no design.
Install took about one minute. Adds some useful weight that allows easier mag drop. Fits significantly better in my hand, I don't have giant hands but they're not small either.
I hope it's not against the rules but here's a link for it on Amazon. I don't have any connection to this company I'm just really happy with this product.
Link to Amazon
Go for it! I have one and fell in love with it. Speaking of the p320 does anyone know if the 17 round mag would fit this
http://www.amazon.com/SigTac-Magazine-Pouch-fits-SIGP226/dp/B00162TCBO
Looks like my wife came over with a kitchen knife and installed your grips. LOL. Beautiful piece!!
Wall Control — $34 (for 2)
They do make their own proprietary mounts but they also allow for any 1/4 peg boards to fit.
I was also looking at those. They are over priced and like you said, you get stuck in buying their mounts.
This one has good reviews and is made by Sig. :)
I have a bore snake for every caliber I own, they are great! OP this is what you want for cleaning: https://www.amazon.com/Hoppes-BoreSnake-Revolver-Cleaner-Caliber/dp/B0013RKHJI?th=1&psc=1
I also picked up a laser bore sighter and matched the red dot to the laser pointer at 15 yards which should get you within a few inches at most. Then it was really easy to adjust from there.
You could also use something like this which should be able to accurately sight it in using less ammo.
https://www.amazon.com/1003626-Hyskore-Parallax-Pistol-Sighting/dp/B0007LOX8C
I got a safariland retention holster. I like it.
One of the only options for left land shooters
http://www.amazon.com/gp/aw/d/B005BNIR9C/ref=mp_s_a_1_2?qid=1457195400&sr=8-2&pi=SY200_QL40&keywords=safariland+sig+p320&dpPl=1&dpID=31jJw8UIvNL&ref=plSrch
I used to have a MRD on my sp2022 that I took off I used this this mount. I still have the mount if you want, it kindof makes the sight sit high but it's not a permanent modification.
It's just a Galco - similar to this model, but not quite exact
Galco Concealable Belt Holster for Sig-Sauer P239 9mm (Black, Right-hand) https://www.amazon.com/dp/B00162TDMM/ref=cm_sw_r_cp_apa_i_S6J2CbNGMR9PR
Safariland Sig Sauer P250 9, 40, 45 6378 ALS Concealment Paddle Holster (STX Black Fin... https://www.amazon.com/dp/B005BNIR9C/ref=cm_sw_r_sms_awd_fcBNwb0A5WK2P
http://www.amazon.com/Hogue-Grips-Checkered-Aluminum-Anodized/dp/B001TECXB0/ref=sr_1_7?ie=UTF8&qid=1406147895&sr=8-7&keywords=p239+grips
Are these the ones you're referring to?
https://smile.amazon.com/Hogue-Extreme-G-10-Grips-Fits/dp/B001TEBLN6/ref=sr_1_1?ie=UTF8&qid=1482359805&sr=8-1&keywords=sig+g-10+grips
I think this is what you are looking for.
Bianchi makes a carrylok for the sig, if you are partial to them.
This is what I use for mine.
Just be warned the picture is incorrect on Amazon. It is a pocket holster as I ordered mine from there.
You can see an actual pic on Galco's site.
Start with one of these: Hoppe's Cleaning Kit. It includes the basics:
These items are cheap but they will get you started. Once you are more familiar with your needs you may decide to purchase additional brushes for later firearms or switch to boresnakes, stick with Hoppe's or branch out to other solvents and CLP's, etc. I have used Hoppe's solvent and basic lube for all of my guns and have had no issues.
Brass brushes or brass wool will never damage steel.
The oil on a rag doesn't seem that great for precise application. Also, I was asking for a bottle/needle tip recommendation.
If any bottle will do, I'll just buy this, https://www.amazon.com/Racers-Edge-2-Ounce-Bottle-Needle/dp/B001HT2GXC/ref=sr_1_24?crid=XJYD1724T515&keywords=bottle+with+needle+tip&qid=1564509232&s=gateway&sprefix=bottle+with+needle%2Caps%2C244&sr=8-24
These were the ones I was referring to, which are made of rubber. The ones you linked to look like they're made of aluminum (would explain the price difference too). I can't speak to the ones you linked since I never ran them when I had my P239, but i can say that the rubber ones were phenomenal to shoot from. The Hogue rubber got rid of the bite that I was experiencing from the rear of my factory grips.