(Part 2) Top products from r/SwitchHacks

Interesting, well your 256gb sandisk card is like the latest & greatest model sandisk makes I believe. So I guess what is happening here is the U1 card I tested against link probably has lower speeds \ write rate than your newer model Sandisk U1 card.

I guess it would also help if we knew specifically how long your rev2 install takes to know just how much faster each card may be. We pretty much just press install and then lose track of things until we notice install is complete. Like I really didn't expect that install to take 53 minutes, but sure enough an episode of Better Call Saul completed before it did haha.

Edit: Oh and I only used the Xecuter menu to install the .NSP files. I could try double check some of these tests with devmenu \ tinfoil to see if there's any difference there.

I can't take another photo yet but this is the case: https://www.amazon.co.uk/HORI-Switch-Game-Card-Case/dp/B01NASY99Z/ref=sr_1_6?ie=UTF8&qid=1537085939&sr=8-6&keywords=switch+game+case

But in all honesty, I wouldn't suggest buying it just for this reason. The only reason I used this was because I already had everything at hand unused and just decided to bodge it all up, it's rather large and clunky but gets the job done without having to spend any more cash haha.

A little late I'm sure, but I highly recommend this set -

https://www.amazon.com/Eclipse-SD-081G-Tri-Wing-Precision-Screwdriver/dp/B0089NNRL4/

They're almost as nice as my Wera screwdrivers and kinda match too.

Pretty sure the official Nintendo licensed carrying case includes 2 game holders that also include a game sized micro SD case.
https://www.amazon.com/NINTENDO-SWITCH-DELUXE-TRAVEL-CASE-MULTI-GAME/dp/B01MY9JB2U

Op bailed out, but here are the sources:
• Pokéball Analog Caps
• Blue Joycons Shell Replacement
• Zelda Screen Protector (included in a bundle)

Edit:
This is actually the screen protector. Found by u/hanleaf254
and the Joycon shells are the DPAD version, but I think the ones I found are better.

Hmm I just bought this 15 feet cable:
https://www.amazon.de/gp/product/B00LBJ780O/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

If I use a ground loop isolator, will it degrade the quality of my 3.5m aux cable?
Because I am looking at some ground loop isolators and I can't even seem to find one with a jack that is gold plated. (not sure how it matters for sound quality)

The Fospower seems to be good sound quality like if you use a ground loop isolator that doesn't use the same level of quality in the 3.5mm jack etc.. won't it make my entire fospower cable obsolete in a way?

Thanks for your reply btw!

Normally somebody would use one of These. The pad would be glued in place using a special heat curing paste. Then, the conformal coating of the trace leading up to the pad needs to be scratched away with a very thin needle. From there, you can solder the two pieces together.

The other option is to follow a trace to the next component, and then solder a wire to both the component and the connector. But you'd also need to glue the connector down for normal use.

Looks like they sell it on Amazon now

Here is the hdd enclosure I use

Sabrent 2.5-Inch SATA to USB 3.0 Tool-free External Hard Drive Enclosure [Optimized For SSD, Support UASP SATA III] Black (EC-UASP)

I have one from [Aukey] (https://www.amazon.com/AUKEY-Ground-Isolator-Systems-Included/dp/B01L1NP7YI)

Edit: apparently the 14.50 dollar isolator from Kript is better at handling bass according to the top review, but it's also more expensive.

This one works fine for me: https://www.amazon.de/gp/product/B019FC6ZQQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

And here's the one the other guy mentioned:

https://www.amazon.de/dp/B01LX0H29W/ref=cm_sw_r_tw_dp_U_x_opB0CbHJXRZGH

With my own personal use case, I like this thing https://www.amazon.com/gp/product/B01MZ61PRW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - Its an external USB C battery pack, but it doesn't add much weight to a backpack / bag if you'll be carrying one of those around. I mostly use mine for travel.

Has anyone gotten a MicroUSB to USBC adapter to work with the Switch for Goldleaf/Payload Injector via TegraRCM?

It does charge the device when plugged into the PC, but the PC does not detect it.

https://www.amazon.com/Anker-Adapter-Transfer-Resistor-MacBook/dp/B01AHKYIRS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1550641019&sr=1-7&keywords=micro+to+usb+c

How about just using this with your cable?

Poyiccot (2-Pack) 90 Degree USB C Type C Male to Female Adapter, Right & Left Angled 90 Degree USB-C USB 3.1 Type-C Male to Female Extension Adapter for Laptop & Tablet & Mobile Phone https://www.amazon.com/dp/B071XHQJG8/ref=cm_sw_r_cp_apa_i_bzvUCb9HPYMGH

its one of those, bought in store

https://www.amazon.co.uk/SanDisk-Extreme-microSDHC-Adapter-Performance/dp/B06XWMQ81P

https://www.amazon.com/Wireless-Controller-Holder-Bracket-Playstation/dp/B01MQ0BGOL/ref=mp_s_a_1_3?keywords=ps4+phone+mount&qid=1564324505&s=gateway&sprefix=ps4+phone+&sr=8-3

You've got options.

You can hook up an OTG cable to your phone and connect the controller to your phone through that!

https://www.amazon.com/AmazonBasics-USB-Type-C-Micro-B-Cable/dp/B01LONQ7R6/

I'm personally using this. Anything labeled UHS-1 is gonna be the fastest card the Switch is compatible with.


https://www.amazon.com/gp/product/B01DAYHMAS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Just to give you an idea of my setup, I'm using this USB stick. And I'm running that with an otg adapter. It's decent priced and much lower power draw and space required to carry.

PNY Turbo 128GB USB 3.0 Flash Drive - P-FD128GTBOP-GE https://www.amazon.com/dp/B00FE2N1WS/ref=cm_sw_r_cp_apa_fkC8BbC22ESZD