(Part 2) Top products from r/Tau40K

Jump to the top 20

We found 22 product mentions on r/Tau40K. We ranked the 45 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/Tau40K:

u/Project_Khazix · 2 pointsr/Tau40K

You can probably carefully remove the weapon systems and clean up and replace them with the correct loadout for O'vesa if you really wanted to make The Eight without causing too much hassle, but as has already been stated, magnets are a godsend for that.

I do have a list somewhere i can dig out that actually runs 2 riptides with The Eight that has worked well for me in the past, and the non O'Vesa riptide runs a Burst Cannon/SMS loadout, so if you weren't opposed to buying another riptide you could run a similar list.

In general though, you'll probably want a couple start collecting boxes, even if you don't use the extra Crisis Suits much, the extra weapons and drones included are incredible value and if you work out individual cost, those Crisis Suits only cost around £6-8 when bought with that box.

Fire Warriors are pretty much a must for almost any really competitive list, the 2 start collecting boxes would give you 20, so you could run 3 squads of 6 and use the Ethereal and the Commander from the Apocalypse set to make a Batallion.

You've got a lot of options really that open up with the combination of Apocalypse Box and the start collecting sets, so that's probably where i'd look to expand. Without knowing what you're aiming for though, whether it be casual list, hyper competitive, or just a fluffy lore based list, its hard to suggest something. It's probably worth downloading Battlescribe and just having a play and see what you have and what you can fit in whatever points limit you set yourself.

Regarding magnets, this Pin Vise and a pack of these magnets are super cheap, and will handle most of your magnetising needs for Tau, and its definitely something you should consider moving forward as Tau loadouts are vastly interchangeable depending on what you want to do with them.

Anyway good luck! People here are always willing to help so feel free to ask any questions as you progress!

u/tarmogoyf · 1 pointr/Tau40K

IDK if Citadel makes one specifically, I'm sure they do, but like a lot of their products, you're often better off getting a different brand that's just as good quality (and frequently better) as well as being cheaper.

​

What I personally use is Testors clear: https://www.amazon.com/Testors-Spray-Lacquer-Clear-Coat/dp/B009FF6DN4

​

You don't have to use a lot, just enough to get an even coat over the whole miniature. Be sure to spray this outside or in a well-ventilated area. Also, don't forget that when you're done coating your models, to hold the spray can upside down and spray the excess for a couple seconds until it's just spraying the medium -- that way it clears out the spray mechanism. If you don't, it'll be clogged up next time you go to use it. This is true for all kinds of spray cans, including primers -- it's a common rookie mistake, so just mentioning it in case you haven't worked with this stuff yet.

u/Acherousia · 6 pointsr/Tau40K

It's a little blurry, but it looks like you need to mesh the greenstuff onto the cloak a little better. It looks like there is a gap between the two?

Having the gap on the shoulders is fine, since it is sitting on top of them, but you want it to blend into the cloak itself, since it is supposed to be part of it.

Do you have a sculpting tool? They help a lot when dealing with greenstuff, especially for keeping your fingerprints off of it.

This is what I use;

https://www.amazon.com/gp/product/B000SVRSRY/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/vrekais · 3 pointsr/Tau40K

I use two of these for my Tau currently. Not sure how they'd cope with larger models though. They fit broadsides and up to Ghostkeel quite easily though.

For my Tyranids which have a few bigger things I use this tool box I've magenetised the bases of all my models. Can fit up to a Trygon in height but lying down (it's magnetised to the side of the box).

The soft cases are pretty good against drops but can easily be crushed, the tool box is pretty much uncrushable but not great at sudden drops. Think I've ended up preferring the tool box though because;

  1. it's really cool to have it unfold open full of models
  • it's super quick to unpack and repack compared to foam.
u/rbt2032 · 1 pointr/Tau40K

I purchased this guy for $64.82. It was an Open Box unit on the Amazon Warehouse Deals. Literally, still shrink wrapped, just in a different box. No damage. Usually a $200-250 air compressor. I was given my first airbrush (my daily driver) as payment during a commission. It is a Badger Patriot 105. I was intimidated by it for over a year and then I decided to jump head first one day and honestly, I haven't looked back. Only regret was not starting sooner. Amazon has the Badger Patriot 105 on sale for $75. At the beginning of the year Badger Airbrush company ran a Happy 54th Birthday Sale and I picked up the Badger Renegade Krome for $54 haha. It retails for $200-250 but Amazon has it on sale for $102. I have yet to use this guy yet, but I am nearing the end of a project and I am going to give it a whirl in a couple weekends. The Airbrush hose for the badgers are listed as well.

My Compressor:

Alternative Compressor 1

Alternative Compressor 2

My 1st Airbrush

My 2nd Airbrush

Compressor Hose


With that being said, you can find deals ALL OVER THE INTERNET....you just have to look for them. I am always scowering the web for the best deals possible haha. For the past 3 years I have been using a 5hp construction grade pancake compressor with a moisture trap. Let me tell you....I REGRET not upgrading to an airbrush compressor much sooner. The air is more consistent, you can fine tune the correct PSI and it is exponentially more quiet. I personally don't care about the tank feature, but that is a personal preference.

Hope this helps you all :D

-B

u/Main-Vein · 1 pointr/Tau40K

Try a wet palette so your paint doesn't start to gum up. And try a larger brush (it holds more moisture so the paint on tip doesn't dry as quick)

I personally bought a wet palette on amazon and a winsor & newton series 7 size 3 brush and it's really helped smooth my paint out. The clumps are coming from paint drying.

People who say "expensive" brushes aren't worth it and that you should be Michelangelo before buying anything nice are pretentious.

u/tamati_nz · 1 pointr/Tau40K

Rotring Tikky Graphic pen 0.1mm has the best flow and is what I've used here. I've used other pens that are even thinner which was great at 0.05mm but the flow wasn't as good so I'm going to stick with Tikky for the moment. I've heard that you get a more realistic result using a dark brown ink instead of black but I haven't been able to find a decent one as yet.

https://www.amazon.com/rOtring-Tikky-Liner-Graphic-1904750/dp/B001G8XK8O/ref=sr_1_7?keywords=rotring+tikky+graphic&qid=1554106885&s=gateway&sr=8-7

u/3X0karibu · 3 pointsr/Tau40K

I would also advise you to get a fine mechanics clamp vise, a small clamp vise with rubber clamps that hold most bits quite nicely, helped me quite a lot

I used This one

Edit: english is hard

Edit1: with bilingual autocorrect even more

Edit2: electronic boogaloo, how to use reddit formating

u/MisterShake2099 · 2 pointsr/Tau40K

Looks like some StarCraft novels (in... German?):

Dark Templar Saga Book 1

I, Mengsk

u/fluffy_warthog10 · 2 pointsr/Tau40K

Dry brushing some black could do it, but I usually use pastel powders, and seal them in with a flat coat on top.

https://www.amazon.com/Tamiya-87085-Weathering-Master-Set/dp/B000FODYHW

u/animeprime · 1 pointr/Tau40K

If you are starting out from scratch you should invest in this brush cleaner. Use it when you're done painting and it will drastically extend the life and quality of your brushes. One tub will last you for years.
https://www.amazon.com/General-Pencil-105-BP-Masters-Preserver/dp/B0027AEANE/ref=mp_s_a_1_7?keywords=brush+cleaner&qid=1563386301&s=gateway&sr=8-7