Top products from r/ToyotaTundra

Sure! Here ya go:

Tent - Decathalon 2 Second 2 Person https://www.decathlon.com/collections/camping-tents/products/camping-tent-2-person-2-seconds-fresh-and-black?variantid=%2479.99

Sleeping Pad - TETON Sports Outfitter XXL Camp Pad; Lightweight Foam Sleeping Pad https://www.amazon.com/dp/B000P6DJ8O/ref=cm_sw_r_cp_api_i_7-D4Cb59KHGEE

Sleeping Bag - TETON Sports Celsius XXL Sleeping... https://www.amazon.com/dp/B000F36TM0?ref=ppx_pop_mob_ap_share

Fan - O2 Cool Battery Powered Fan Battery or 9V powered (no included plug) https://www.walmart.com/ip/O2COOL-10-inch-Battery-or-Electric-Portable-Fan/49332866

Hammock - ENO - Eagles Nest Outfitters DoubleNest Hammock, Portable Hammock for Two, Red/Charcoal https://www.amazon.com/dp/B001DDPGNO/ref=cm_sw_r_cp_api_i_6cE4Cb7424XT2

Hammock Straps - ENO - Eagles Nest Outfitters Atlas Chroma Hammock Straps, Suspension System, Red/Charcoal https://www.amazon.com/dp/B00TQZGV2Q/ref=cm_sw_r_cp_api_i_MdE4CbCGMSQFX

Rubbermaid Box - https://www.walmart.com/ip/8-Gal-Action-Packer/689561395

https://www.amazon.com/Performix-11203-Multi-Purpose-Coating-Aerosol/dp/B0006SU3QW/

It's more like spray paint. It works super well.

https://www.secondipity.com/sony-xavax1000-6-2-15-7-cm-apple-carplay-media-receiver-with-bluetooth/ THE SONY PROB WORKS BETTER MORE CONSISTENTLY BUT THIS ONE HAS GOOD REVIEWS https://www.amazon.com/Receiver-aboutBit-Bluetooth-Front-View-Subwoofer/dp/B07Y1VBYQ4/ref=sr_1_115?keywords=BLUETOOTH+FM+RADIO&qid=1573110126&sr=8-115

I'd recommend buying this belt.
https://www.amazon.com/gp/product/B002WH96YU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It's $40, but it's super high quality. I did mine this past summer and this one had several recommendations on tundra talk, it's formerly known as the gatorback belt.
Changing the tensioner would probably be a good idea too, as Mr. BrohamLincon suggested. However I didn't change mine since I knew that sometime in the near future I will be doing my water pump and alternator as preventative maintenance and I'll change the belt tensioner then as well.

https://www.amazon.com/MAXFLOORMAT-Toyota-Coverage-2014-2017-Complete/dp/B00VEIVBKK

I love these. Sturdier and thicker than huskyliner and weathertech mats.

Do you have overlays? If you can remove them, it might be worth it to hit them with one of those plastic refresher products. I’m thinking something like this: BLAK • Permanent PROTECTANT - Restore Faded Black, Renew Plastic, Rubber, and Vinyl Color, Prevents Dry Rot on Tires - Weatherproof, UV Block, Dry-Seal - 8oz Kit https://www.amazon.com/dp/B007MGIPTS/ref=cm_sw_r_cp_api_i_s0qRDb98GRC3Z

Obviously you’d want to do this if they’re removed ideally, but I assume a solid masking job might make it possible if they’re still on the truck too.

I just ordered these for my 2014 CrewMax:
MAXFLOORMAT Floor Mats for Toyota Tundra Crew Max (Coverage Under Second Row Seat) (2014-2017) Complete Set (Black)
https://www.amazon.com/dp/B00VEIVBKK/ref=cm_sw_r_cp_apa_bVXWzbG5GYXGC

Full coverage on the back seat floorboards. Don't know if they make one for the 07 but hopefully this gets you on the right track

Yes, it is 60/40. It's ok...I bought this console on Amazon and strapped it through the seats

I upgraded my method this time around and it went a lot better than my last car. I used a heat gun to warm up the badge (kept checking surrounding paint with my fingertips) then used some braided fishing line (25lb) with zip ties on each end to save my fingers. Sawing motion with the line behind the badge. After I carefully pop it off I did a combo of rolling the adhesive off (quick heat gun helps) with my fingers and using an eraser pad at low RPMs. Those things are amazing and it did zero damage to the paint. Rinse, wash and wax the area afterwards. If the truck wasn't brand new it might need some paint correction to make things look right.

Way cheaper than what the dealership wanted and only took me 30mins.

I used this one.

I'll see if I can grab a pic tomorrow. I have a 2011 Tundra however. Don't know if this model would fit yours exactly. I haven't lost any reception either.

We drive on Delaware State beaches year round and the sand gets very soft. I am frequently tempted to not air down because my '04 is great in the sand, but I always get the full nag from wife and kids, and nobody wants to be that stuck guy. So I drop to 25psi, which makes a noticeable difference in traction, but I can still safely drive on the road to the industrial air pump at a nearby gas station. But honestly in 4x4 you're probably fine. If you start to feel any slippage at all you just stop and let some air out, but don't wait til you're immobile. I use these, screw in all 4, then immediately unscrew all four, takes seconds. https://www.amazon.com/gp/product/B003AOPB5W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Got it on Amazon!

6 3/4" Antenna MAST - FITS : Toyota Tundra 2007 08 09 10 11 12 13 14 15 2016 2017 2018 https://www.amazon.com/dp/B0721Z7YV8/ref=cm_sw_r_cp_api_i_EsIhDbFZTAD5S

I have this one and it’s worked flawlessly for me.

https://www.amazon.com/Passenger-Headlights-Replacement-811500C010-811100C010/dp/B008G35SZK/ref=sr_1_27?keywords=tundra+headlights&qid=1556634826&s=gateway&sr=8-27

I actually bought a refurbished one for under $300.


https://www.amazon.com/Performance-Intake-63-9036-Lifetime-Filter/dp/B008ZE8VRC/ref=mp_s_a_1_4?ie=UTF8&qid=1539921551&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=2016+tundra+k%26n+air+filter&dpPl=1&dpID=41pFhVSay8L&ref=plSrch

What have you tried so far?

https://www.amazon.com/Loctite-37438-Rearview-Mirror-Adhesive/dp/B000VNAIQ2

$244.97 from Amazon. I've seen it as low as $220 but wanted to get it installed before this weekend.

I bought Fog lights with bulbs and a Denso Relay from Amazon. I got a turn signal stalk from a wreck via eBay Motors

😂 that shit is HEAVY duty

I had a free oil change left with Toyota, and I had completely forgotten to mention the plates or that they’re heavy af... the tech greatly underestimated the weight and unbolted the front plate onto himself lol. Apparently, everyone in the shop laughed at him. Poor guy. I don’t too feel bad, because he over-tightened the filter housing and drain plug until they were rounded. Which leads me to my next tip. Swap the plastic housing for an aluminum one, and the plug for a Fumoto drain valve. You don’t want to be fucking with either of those stock shits with how little room you have now. Otherwise, you’ll risk having to remove the two front plates every oil change. You can reach the housing with an extension on a filter fitting, but the plug is awful to get to when it’s not over-torqued and impossible to get leverage on when it is. When it’s stubborn or too tight, you’ll have to take the first and second plates off. If you get oil from the filter onto the plate and don’t want it to end up smelling like burnt oil, you’ll have to remove the first one and wash it. That got old after only the first or second time I had to do it.


Here is the Fumoto valve. Buy the correct sized tubing, clip, and nipple end cap that aren’t included, but should be.

This is the filter housing. You’ll need to reuse the tube and plug from the plastic housing.

Skip the plastic doodad that comes with every oil filter. Cut this down to an appropriate length, and you’re set