Top products from r/TraditionalArchery

We found 6 product mentions on r/TraditionalArchery. We ranked the 6 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/TraditionalArchery:

u/basilis120 · 9 pointsr/TraditionalArchery

Ok so This might get a bit long. and I apologize if you already know some of this, just being complete

tools:
I get most of this from 3-Rivers because they have everything you'll need but look elsewhere as needed. They also have some videos on there site on how to use the tools.

Taper Tool This will cut the taper for the nock and point. The 5° for the point and 11°C for the nock. Get the right size for the shaft diameter you use.
Fletching jig (answered elsewhere)
fletching glue: I use either Fletch-it or Gorilla super glue
Nock glue: same as fletching glue
Point glue: I use the Boehning Ferr-L-tight I have never had a problem with it them falling off even in the desert heat. Need a heat source; candle, alcohol lamp, etc.; to melt the glue to use. Some people use epoxy the main draw back is if you want to change or salvage points.
Something to cut the shafts to length.
Finish and or paint of your choice
pliers for putting on nocks if you use hot glue they will get hot
cup of water to cool the points when they are installed
Spine weight calculator My favorite tool for getting a starting point on the proper spine weight

components
Shafts: Lofts of good options with different properties but for simplicity right now go with Port Orford Cedar its is the cheapest option that I have found and the lightest. Pick either 5/16 or 11/32 depending on the spine weight you need.

Field Points Pick the same diameter as the shafts you selected and for simplicity go with 125 grain points. Because that is the weight that is assumed to be used in the spine weight of the shaft.

Fletching I assuming you want feather fletching if you're making wood arrows. Pick either shield or parabolic cut and the colors your want. Go with 4-5 inch long feathers.

Nocks Pick the size based on the shafts diameter and pick your color. These are the only nocks I'll use, there are others but they have never let me down.

Simplified Process
This can be done in groups just giving as doing one arrow for simplicity and once you know what your are doing some of these steps can be done in a different order

  1. Straighten shaft
  2. Cut nock (11°C) taper
  3. apply a finish (polyurethane, Linseed oil, etc)
    • the cut nock taper helps if you are dipping the shafts to finish
    • I have had good luck rubbing on the finish with a cloth
    • Now would be a good time to crest (paint the shaft all fancy) and apply another coat of finish over that
  4. cut to lenth
  5. Cut nock taper
  6. boil points to clean off machining oil
    • Yep, put them in a pot with water and a drop of detergent on the stove to clean them off. easiest way
  7. Glue on points using hot glue (or epoxy and skip the steps below) Video from 3_rivers
    • get some melted glue on shaft
    • slide on field tip
    • put point over flame to melt glue and slide it on the shaft (use pliers)
    • Put point in cup of water to cool off.
  8. Glue on nocks with super glue
    9 Fletch: The True Flight fletching guide does a better job of explain it than I ever could

    and you are done.

    It really is that simple. I have made (and broke) bunches of arrows so if you have questions ask away. I can elaborate on different parts if you have specific questions or wondering what to do when you get the parts in.





u/GardenGnomeOfEden · 4 pointsr/TraditionalArchery

For more of a toy approach to get a kid interested: https://www.3riversarchery.com/kid-bow-and-arrow-set.html

For more of an actual bow:
https://www.amazon.com/Bear-Archery-1st-Shot-Youth/dp/B00R3A79HW/

I don't own either of these, I've just been shopping around for my daughter, who is only 4 months old.

u/beast_in_black · 1 pointr/TraditionalArchery

It seems to be the Rush Creek Rustic 2-bow stand. I'm definitely getting one for myself when I have some spare cash.

u/Lopedup · 4 pointsr/TraditionalArchery

This is what got me started. It's a full text book that will get you from unboxing your first bow and not knowing what the hell to do with it to putting 3 inch groups on target at the range.
https://www.amazon.com/Shooting-Stickbow-Practical-Approach-Classical/dp/1602642443