(Part 2) Top products from r/Vaping

It's definitely cheaper than my other hobbies, flight simming and photography. Diverting my attention to vaping actually ended up saving me a bunch of cash.

In fact... DON'T take up flight simming

You first need this OR this

Then you're all like, wtf? Why doesn't it look anything like this

Then you buy one of these and realize that FSX doesn't support hyper threading since it's a POS software from 2006 when Microsoft stopped developing it. So you actually need one of these, overclocked of course.

Then you need realistic controls, your keyboard and mouse just won't do so you get a cheap joystick which is ok for the first few months, till you come to the conclusion that what you really need is a HOTAS controller.

Which is about the time you buy TrackIR, which tracks your head movement for added "realism"

This is of course precisely when you realize that you would rather fly general aviation aircrafts, like Cessnas and Boeings and military aviation is just not right for you, and you get a different controller, something like this.

That lasts you all of two months before you're sick and tired of the plasticky build quality and erroneous "null" zone so you go and buy one of these.

Now that you're comfortable spending money on your "hobby" you get into serious money territory and go ahead and buy instrumentation. Your setup now looks something like this

By this time you would have spent roughly $5000 or more on hardware and a whole bunch of software plug-ins and add-ons, because FSX by itself it's pretty basic.

You're now completely committed and have dreams of being a real pilot, you start to think about how you will justify buying a properly kitted out sim and actually "charge" people money to come sim at your home. And you buy something like this which of course comes without a yoke which you have to buy separately. And then add an overhead panel.

By now you are running FSX on multiple fast computers and have connected your iPad and other devices to your setup.

There are folks who have spent many hundreds of thousands of dollars on this "hobby".

Stick to vaping. It's just a whole lot cheaper.

Get yourself one of these to tighten the brass screw on the bottom of the mod by the battery door. All the power used relies on it being tight, and it's a delicate screw. Hardware store brand tools will strip the head right out. Good mod otherwise. Also, Artic Fox firmware is great on it if you like playing with that sort of thing.

Wiha 96705 Torx Screwdriver with Precision Handle, T5 x 40mm https://www.amazon.com/dp/B000T9XPU4/ref=cm_sw_r_cp_api_aw9UBbFZ5BVDE

Haha thanks since everyone seems to like the stuff on my desk here's a link to the radio......



https://www.amazon.com/gp/aw/d/B001BGGD8A/ref=mp_s_a_1_1?ie=UTF8&qid=1501094933&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=wr-11&dpPl=1&dpID=51HFr3byQcL&ref=plSrch&th=1&psc=1

I loved this sign so much, I made it into a Shirt. I hope you guys like it!

https://www.amazon.com/dp/B07YY89C7K


Edit: (I barely make any profit of it, bout 10 cents, if its considered illegal advertising despite that feel free to remove)

http://www.amazon.com/Heaven-Fresh-HF-Ionic-Purifier/dp/B000YBXDVS i have 3 of these(much older/different brand, but basically exactly this) around the house, and i keep a ceiling fan on... i am not sure what your solution is meant to solve but i don't have any cloud buildup in the house.

There is a bunch of different names and brands. But those rubber strap wrenches work great and don't do any damage.

Here's a example
http://www.amazon.com/Rubber-Strap-Wrench-6-in/dp/B0002H338C

For mixing I recommend a cheap milk frother. After I've added all the ingredients I give it a good blitz for a couple of minutes, This really only works if you're mixing a decent amount (say 50ml+) in a bowl/jar before pouring into a bottle.

This is what I use. Le'Xpress Frother

Grab one of these for 6 bucks and toss it on your counter or vape shelf. Best 6 bucks I ever spent.

For day to day carrying, I keep my juices in my backpack in a Xikar 5-cigar travel humidor - it's lightweight, padded for protection on the inside, and solid enough that it can withstand being run over by a truck without damaging the contents.

Size 0 Phillips, 1.4mm slotted. Here is the kit on Amazon; http://www.amazon.com/Stanley-66-052-6-Piece-Precision-Screwdriver/dp/B00009OYGV/

Ha reminds me of the bedtime story I read to my kids earlier. Every time I read that story I geek out internally

Turkey baster? Not the brush kind but the kind that’s basically a giant eye dropper.

Example: Norpro Nylon Baster https://www.amazon.com/dp/B000HEIUBU/ref=cm_sw_r_cp_api_i_3AtSDb3GAQX93

https://www.amazon.com/Bob-Ross-Bobblehead-Miniature-Editions/dp/0762490411/ref=sr_1_1?ie=UTF8&qid=1522885611&sr=8-1&keywords=bob+ross+bobblehead

This

Or this

Both of which are available at your local grocery store or Walmart.

All Thread Rod?

https://www.amazon.com/gp/product/B000UUABE0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Slices through cotton like.... I can't even describe.

Use these.

Right. Sorry, I did some math; you're not discharging at 35 amps.

You're discharging your cells at approximately 36.52amps.

You should probably check these out for the future.

Don't know about "best" but I use this one: https://www.amazon.com/dp/B001DKDAVW/ref=cm_sw_r_other_awd_slH3wbYMXC4N7

Pros - cheap. Has lasted almost a year.

Cons - small (~six maybe seven 30ml bottles). Timed (so it doesn't just stay on, has a three minute timer - I get around this with a rubber band and a cork, just holds the button down).

Other notes - gets hot. Not only can you burn out your motor but you can also kill bright/top notes in your juice if it gets too hot. Best to do 15/15/15 on/off/on.

Here is my setup:

• ProVari 3
  
• The Russian 91% v2 RBA
  
• Cotton Roll Sterile (1 lb) 12-1/2" x 56"
  
• TEMCo Kanthal A1 wire 28 Gauge 100 Ft Resistance AWG A-1 ga
  
• Walant 3PCS Wire Coiling Tool CW-20 CW-25 CW-30 Coil Builder Maker
  
  The battery for the P3 last me 16 to 18 hours before I have to charge them again. I usually buy 2 batteries and have one in reserve fully charged.