(Part 2) Top products from r/WRX

Jump to the top 20

We found 50 product mentions on r/WRX. We ranked the 386 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/WRX:

u/lazypanda55 · 2 pointsr/WRX

They look even better in person! I got a set of black McGard spline drive lugs along with wheel locks. Debated a while on Gorillas and Mutekis, but durability wise, McGard seemed to hold up better compared to the other brands.

https://www.amazon.com/gp/product/B0006HOVNE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Should probably mention that I only researched brands with locking lug nuts, just to help me sleep better at night.

u/gbeezy007 · 1 pointr/WRX

I got a 2018 relocation non brand name it was labeled for wrx and be but some wrx complained about it sticking out too much which is why it probably fit my 18 okay. Haha.


I too would be interested in a pic or two of how it's installed light bar used and cost. Nothing crazy detailed just curious


Edit. Looked at my Amazon account this is the one it says I ordered
https://www.amazon.com/gp/aw/d/B01KYOHD1K/ref=ox_sc_act_image_1?smid=A3H3VFI98ZH1GY&psc=1
If you get this make sure to reference the diagram on the product page

u/RuhaiHu · 1 pointr/WRX

https://www.amazon.com/gp/product/B00I608BJ8/

They have a few varieties of mounts.

For the most part once I tighten it it stays. Though slowly it will come loose. At some point I will probably take some epoxy or something along that line and just permanently fix it in the position on want it. Probably when I break it from tightening or it wears too much to tighten.



It is held on by 3m tape.

I found that to be a good place to keep it out of the sun heat/ fan heat. Spot also cools off ok from AC. Also keeps my phone from blinding me when driving at night.

BIGGEST thing I like about that spot is that I don't have to stretch/reach like if it was up above the radio.

I also find that spot to be good because I can quickly steady my hand on shifter(people going to complain about that)/ find my position so I can quickly request new playlist or try and tap the voice command button if for some reason its not working by voice.

​

EDIT!:

https://www.amazon.com/gp/product/B07475C1VT/

Using a slim case like this that has a depression in it so I don't actually have to stick the metal plate for the magnetic part to my phone or a case.

u/Big_Simba · 4 pointsr/WRX

Yikes. The top part looks like it might buff out (unless that’s just dirt) but you’re gonna have to touchup the section just above the fog lights. Subaru sells touchup paint, and then you’ll need this special little tool for applying the paint. I’ll see if I can find the YouTube link for how to fix those for ya. That’s so shitty but it happens to the best of us :(


Edit: here’s an amazon link to the tool that was recommended to me for applying the paint: Loew-Cornell Fine Line Painting Pen https://www.amazon.com/dp/B004YZXV8U?ref=yo_pop_ma_swf

u/SmileAndDonate · 1 pointr/WRX


Info | Details
----|-------
Amazon Product | Bell Automotive 22-1-46230-8 Adjustable License Plate Frame Mounting Bracket
>Amazon donates 0.5% of the price of your eligible AmazonSmile purchases to the charitable organization of your choice. By using the link above you get to support a chairty and help keep this bot running through affiliate programs all at zero cost to you.

u/fckimlost · 4 pointsr/WRX

C Light - https://www.diodedynamics.com/2015-2019-subaru-wrx-sti-c-light-switchback-led-halos.html

Halos - https://www.diodedynamics.com/hd-led-halos-for-2015-2019-subaru-wrx-wrx-sti-pair.html

Blinker Module - https://www.diodedynamics.com/led-flasher-for-2015-2019-subaru-wrx.html (Needed this because I removed my stock blinker lights. Could have wired in resistors, but this was easy and cheap)

LED Conversion Bulbs - https://www.diodedynamics.com/low-beam-led-headlight-for-2015-2019-subaru-wrx.html (Still waiting on these, so haven't tested them, but they'll be in this Friday)

Headlight Sealant - https://www.amazon.com/RetroRubber-Grade-Butyl-Headlight-Sealant/dp/B01N5PM29J

Harnesses to clean up wiring - https://www.amazon.com/gp/product/B07QFW8X9Z/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 (Haven't installed yet, but planning on tomorrow)

Used to seal the hole of the old C Light bulb. Ran the C Light and Halo Harness through here - https://www.homedepot.com/p/Permatex-3-oz-Black-Silicone-Adhesive-Sealant-75150/302775053

Used to hold Halo in - https://www.homedepot.com/p/J-B-Weld-0-47-oz-ClearWeld-50114H/303710929 (There's other ways to do this, but this is what I chose)

Paint I used - https://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-15-oz-Flat-Black-General-Purpose-Spray-Paint-25-Bonus-336099/304221900

I also got the Subispeed harnesses, but I didn't use them because I deleted the stock turn signal bulb.

​

And I think that's it. Be sure to wear nitrile gloves too to avoid finger prints.

​

Also take your time. Don't paint the high beam housing unless you have another plan for those like a second projector.

​

Any other questions or pictures let me know.

​

(Side note, this is probably not done for me and I'll probably post more if I do more with these. Thinking about changing the bumper cover holes where the turn signals were for instance)

u/wickedhahhd · 2 pointsr/WRX

I have had amazing luck with the Sony XAV-AX100. It is a very stable head unit running AA and sounds way better than the stock stereo. It also looks like it could be stock as opposed to the obnoxious ones that have a million green blinky lights. It doesn't support wireless but you can retain steering wheel controls and center console USB, just by using this custom wiring harness. https://www.amazon.com/gp/product/B01D9K3L44/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I used this thread for install questions.

https://forums.nasioc.com/forums/showthread.php?t=2815667

u/btownninja · 3 pointsr/WRX

Get a small jar of touch up paint and use a touch up pen or super fine touch up brush. ammynyc recommended one of these in a paint chip touch up video: https://www.amazon.com/Loew-Cornell-Fine-Line-Painting-Pen/dp/B004YZXV8U/ref=pd_sbs_201_1?_encoding=UTF8&psc=1&refRID=HE86WYZ4922KYS1SJYY9

u/Tavataar · 1 pointr/WRX

Rexing V1 has worked super well for me. I wired it into the fuse box so it automatically turns on with the car.

u/rexstryder · 2 pointsr/WRX

And just think, some of the suds dripped off BEFORE I got this shot. Here are the links to the Foam Gun/Cannon and the soap:

Foam Gun/Cannon

Soap - Chemical Guys Honeydew Snow Foam

I also grabbed the mitt that was offered with it from Amazon.

I added some soap to the canister with the water to dilute it. I just poured in what I thought was good. My pressure washer is a gas powered Troy from Lowes rated at 2900 PSI.

Hope this helps you out.

u/KolchakNS · 2 pointsr/WRX

SCOSCHE MAGDMB MagicMount Universal Magnetic Phone/GPS Mount for the Car, Home or Office in Frustration Free Packaging https://www.amazon.com/dp/B00I608BJ8/ref=cm_sw_r_cp_api_i_X996Cb05D569E
Works great for me!

u/O00coolzero00O · 2 pointsr/WRX

I actually bought a similar adapter for my 2018 WRX, it works great! I did it because I didn't want them to drill holes in my bumper.

Edit: I bought this one, not the foremention adapter.

https://www.amazon.com/gp/aw/d/B071ZNH9PH/ref=mp_s_a_1_fkmr1_2?ie=UTF8&qid=1504924458&sr=8-2-fkmr1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=2018+wrx+license+plate

u/Blubaru23 · 4 pointsr/WRX

Regarding the relocates the Grimmspeed one is the best.

It blows the Perrin one out of the water in regards to adjustability. Perrin can only slightly adjust vertically where as the GS has a ton of vertical+horizontal.

I know because I own both.

u/tigerpunch911 · 1 pointr/WRX

I bough this one and am happy with the result.

GrimmSpeed 2015+ Subaru WRX/STI License Plate Relocation Kit https://www.amazon.com/dp/B01692HYRO/ref=cm_sw_r_cp_api_i_jdSdBb0BQTXVD

u/conwar · 3 pointsr/WRX

I got this suction cup mount and placed it in the bottom left corner of my windshield. When you open the driver side door, there's a panel on the dash that you can take off using some pry tools (I used plastic pry tools so I don't damage anything) and slip the wire through a small hole to the OBD2 port. It was a little tricky to get the wire through but you end up with a really clean look where the only exposed cable is coming out of the door to the Accessport. Picture of my setup

u/macreadyrj · 4 pointsr/WRX

It can read the sensor IDs from the summer set, then input the IDs from the winter set (assuming you know them). I got my IDs from tire rack when I got a new set. There is also a tool available on amazon that can read TPMS IDs, more expensive.
It plugs into the car's OBD port to get the info and reset the IDs, and you need a windows PC/laptop to run the software. It was a little bit of a pain to get right the first time but I have it figured out now. Also, a laptop is nice so I don't have to run back and forth to the PC while trying to get these things working.

My local garage quoted me $100 to swap winter/summer and reset TPMS for one car. We have two cars, so that would be $400/year. My floor jack and TPMS sensor paid for themselves in one year.


ATEQ reset tool: https://www.amazon.com/ATEQ-QuickSet-TPMS-Reset-Tool/dp/B008SCWXN4

If you don't know your sensor IDs you can use this to read them, but it's another expense. You could also go to a tire place.
https://www.amazon.com/gp/product/B00AERMVYC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/mybuddycory · 1 pointr/WRX

Got the husky as well - (Amazon for ~100) One winter in and I love them. Only issue is a gas handle cut out is missing so you have to lift slightly to get to the gas cap release. 17 wrx base

link

u/_Migals · 3 pointsr/WRX

I have a wrx and opted for the STI frame. Hope that doesn't look poser?? lol I just wanted the red to match my car..

u/dotMJEG · 1 pointr/WRX

Be mindful that it can take anywhere from 1-10 miles to reset the computer to the point that it either recognizes the TPMS sensor and shuts off the light, OR, in that it will only recognize there is a problem well after they have been installed/ synced and it will only then turn the light on.

They have a little hand held machine (like an old giant gameboy) that they kneel down next to the wheels and hold by the TMPS sensor (valve stem) to "sync" everything. IDK that you have to push them as far as describing the sensor-sync tool. It'll be like this.

u/BeanBroadcaster · 2 pointsr/WRX

I used this for my pinstripe: https://www.amazon.ca/dp/B00029XBBY/ref=cm_sw_r_cp_apa_i_vrLjDb4TNCG8S

The roll seemed flimsy and cheap but it seems to be sticking well.

u/ageaye · 2 pointsr/WRX

https://www.amazon.com/Auto-Ventshade-896004-Ventvisor-Deflector/dp/B0035GQ5S2 looks like they dont sell anything that fits 15+, I would def swap for my OEM if it did. I got a deal for $86 for the OEMS and this is even less expensive.

u/ZombieDO · 1 pointr/WRX

Bumper Tow Hook License Plate Mount Bracket For SUBARU BRZ 2013 2014 2015 2016 WRX 2015 2016 WRX STI 2015 2016 https://www.amazon.com/dp/B01KYOHD1K/ref=cm_sw_r_cp_api_XYnjzb0JFC9GB

The angle adjusts infinitely. The thing is absolutely rock solid.

u/TheSevenFive · 3 pointsr/WRX

Same, I've had the car for three weeks and have been debating it the whole time. I read that you can reuse it, and after opening it did seem fine enough to reuse but I didn't want to risk it, resealed it with Mirimoto Retrorubber Butyl sealant

u/lbkid · 0 pointsr/WRX

It’s the Rexing Dashcam. I like it because of the slanted shape that fits the slant of the windshield. I do not have it facing the rear yet, but and considering getting one.


https://www.amazon.com/Rexing-Dashboard-Recorder-G-Sensor-Recording/dp/B00X528FNE

u/scroller52 · 2 pointsr/WRX

http://www.subispeed.com/led-front-turn-signal-bulbs-2015...


https://www.amazon.com/Alla-Lighting-H11.../dp/B01N67FMQ5/

​

using these for turn/signal lights. if you change to LED bulbs for turn signal, you will need a hyperblink module.

u/EverybodyWantsYou · 2 pointsr/WRX

This is the exact one that I bought. It says it doesn't fit, but I 100% asssure you it does if you have a 13 sedan.

https://www.amazon.com/gp/product/B0035GQ5S2/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

u/WRX2017 · 2 pointsr/WRX

Get all weather liners for the cabin and trunk, the stock fabric ones will get disgusting quickly.

Plastic Cargo Tray: https://www.amazon.com/dp/B006QNUT7Y/

Subaru all weather liners don't cover much, get either Weathertech or Husky Liners.

Weathertech: https://www.amazon.com/dp/B008OITWN6/ (I have this one, mostly cause my coworkers have them)

Husky Liners: https://www.amazon.com/dp/B008M1WK7A/ (cheaper and some like the coverage better)

u/bolo562 · 1 pointr/WRX

No prob. Although I got these installed

Nokya Hi-power H8, H9, H11 LED Fog Light Bulb - Hyper Lime Yellow https://www.amazon.com/dp/B00BFL7P7E/ref=cm_sw_r_cp_api_knuWzbDAR04Z2

I would recommend getting these due to lower price and reliability according to my installer.

Alla Lighting High Power 3030 SMD New Version Xtremely Super Bright H11 H8 H16 Type 2 Gold Yellow LED Bulbs for Fog Light Lamps Replacement https://www.amazon.com/dp/B01N67FMQ5/ref=cm_sw_r_cp_api_CpuWzbXVC9WTJ

The fog led bulbs are the only part I brought seperately. He painted the fog housings with yellow anodized paint to withstand the elements.

u/0x446576656C6F706572 · 1 pointr/WRX

Front Bumper Lip Fits 2015-2019 Subaru WRX STI | HD Style Black PU Front Lip Finisher Under Chin Spoiler Add On by IKON MOTORSPORTS


https://www.amazon.com/gp/product/B071WVQNK3/ref=oh_aui_search_detailpage?ie=UTF8&psc=1