Top products from r/accord

We found 26 product mentions on r/accord. We ranked the 29 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/accord:

u/bmarsh82 · 3 pointsr/accord

I've not gotten any compliments or honked horns at me... so I'm not sure if they are blinding..

Turn signal lights

Alla Lighting Brightest CANBUS... https://www.amazon.com/dp/B07GVT4F2C?ref=ppx_pop_mob_ap_share

Reverse lights

AUXITO 912 921 LED Backup Light... https://www.amazon.com/dp/B0728DYR9H?ref=ppx_pop_mob_ap_share

Inside lights

SEALIGHT 194 LED Bulb Error Free,... https://www.amazon.com/dp/B07G4VJP5N?ref=ppx_pop_mob_ap_share
And
NAKOBO 2835 Chipsets (More... https://www.amazon.com/dp/B07K7F2169?ref=ppx_pop_mob_ap_share

Hope that helps!

u/GonadsOfWrath · 2 pointsr/accord

If you struggle with vision at night, changing to LED will only create the illusion of better vision at night.

Your Accord takes H11 low beams, and these are much, much brighter than stock. They will drop right into your Accord with 0 modifications needed. Your Accord is only 2 or 3 years old, and therefore more than likely still on its original, factory bulbs, which are the long-life type. Long-life bulbs put out very little light to begin with, and as the bulb ages, they put out even less light. Here's an example of what happens when you toss the factory bulbs for performance halogen bulbs.

Do you use your high-beams a lot?

u/hallstevenson · 1 pointr/accord

Are these adapters (GROM, Parrot) in the $150 range ? If so, that's not as bad as I was thinking....

Budget option is something like this: https://smile.amazon.com/Yomikoo-Interface-Connector-2003-2011-2006-2010/dp/B01EUZ90II/ref=sr_1_1?qid=1568856305&refinements=p_n_feature_keywords_browse-bin%3A3822502011&s=electronics&sa-no-redirect=1&sr=1-1&th=1

Get one of these and plug it into the USB connection: https://smile.amazon.com/Firefly-Bluetooth-Receiver-Smallest-Streaming/dp/B01HDO66NK/ref=sr_1_1?keywords=tunai&qid=1568856552&s=electronics&sr=1-1

Do NOT connect the 1/8" cable to your phone though. Connect it to the Bluetooth receiver. Looks like you'll need a 1/8" female to 1/8" female "coupler" too. This seems very clutzy the more I think about it though.....

u/mere_iguana · 1 pointr/accord

https://www.amazon.com/DLZ-Suspension-Kit-Front-Assembly-Compatible/dp/B01H05VKJW/ref=sr_1_9?keywords=1997+accord+suspension&qid=1562075357&replacementKeywords=suspension&s=gateway&sr=8-9&vehicle=1997-59-751------------&vehicleName=1997+Honda+Accord

:)

If you're gonna do ball joints, might as well do all of it while you're in there. It's so cheap, why not.

Throw in a set of struts and strut bushings for another $150-200 and that thing will ride like it's 1997 again.

I bought this kit, it came with upper + lower control arms, and most of the ball joints already pressed in. that first kit above one only has the uppers. https://www.amazon.com/gp/product/B0792FYGJ9/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

u/AwesomelyHumble · 1 pointr/accord

I got the PIAA silicone wiper blades for my 2015 4Runner and now I swear by them. Definitely nicer than the stock rubber blades, and I just ordered some for my 2018 Accord. That's my recommendation.

You'll need a 16" (passenger side) and 18" (driver side).

https://www.amazon.com/dp/B004BTDOOU/

u/davrukin · 1 pointr/accord

Generally pretty satisfied with this one:

https://www.amazon.com/dp/B076GYGVY5/ref=cm_sw_r_sms_apa_i_u1YTDbD6X6EWW

Bought this one first and was dissatisfied with the image quality so I returned it:

https://www.amazon.com/dp/B07DLG9GFG/ref=cm_sw_r_sms_apa_i_U2YTDbM3D46BQ

u/goodfellaslxa · 0 pointsr/accord

iOttie Easy One Touch Wireless Qi Fast Charge Car Mount Kit || Fast Charge: Samsung Galaxy S10 S9 Plus S8 S7 Edge Note 8 5 | Standard Charge: iPhone X 8 Plus & Qi Enabled Devices | + Dual Car Charger https://www.amazon.com/dp/B0754NDNT8/ref=cm_sw_r_cp_apa_i_se7qDb954EFDY

u/Fulmario · 3 pointsr/accord

I didn't have mine that long before I changed it. So I never experienced it.

If you're interested in changing out your shift knob. These are the pages I used as reference.

https://www.accordxclub.com/threads/my-2018-honda-accord-2-0t-manual.1914/

https://www.accordxclub.com/threads/changing-the-gear-shift-knob.1012/

You'll need a new shift boot collar otherwise the boot will just sag and not made with the new knob you buy.

https://www.amazon.com/gp/product/B07BM21ZN3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Also comes in black.

A 10 x 1.5 threaded knob is what you'll need. Mine does not spin (now). If it did, I could probably use some loctite on the thread to prevent it from spinning.

u/cspek · 1 pointr/accord

I use this in my 18 ex. It hooks into the actual vent and has stabilizer legs as well

DesertWest Car Phone Mount Air Vent Phone Holder https://www.amazon.com/dp/B07C8HY65H/ref=cm_sw_r_cp_api_i_6uuyCb60JDYM1

u/saucetradomous · 1 pointr/accord

Just got my 2.0 Sport a couple days ago. Picked up the 3D MAXpider L1HD09801509 All-Weather Floor Mat.

Not too thick but provides enough coverage. So it should be up your alley. Also purchasable for Canadian drivers without crazy shipping costs.

US: https://www.amazon.com/3D-MAXpider-L1HD09801509-All-Weather-Models-Kagu/dp/B07C37SD7J

CAN: https://www.amazon.ca/dp/B07C37SD7J/ref=pe_3034960_236394800_TE_dp_1

u/CrazyGremlin24 · 2 pointsr/accord

I bought this one for my 2018 Accord. Fits right behind the mirror and I don't even know it's there. My plan is to buy a second one and put it in the rear window, the cable is very long so it will reach the front for power. I also believe there is a hard wire kit for this model that plugs into the fuse box.
https://www.amazon.com/VIOFO-Camera-Logger-Tronic-Certified/dp/B07CKD92VM

u/Ranguvar · 2 pointsr/accord

PAC AAI-HD3 https://www.amazon.com/dp/B00H26468M

Works well, no issues on my 04.

u/luketabor · 1 pointr/accord

Doesn't look like McGard makes ball-seat wheel locks. These are the most affordable option I've found for Honda-compatible wheel locks: https://www.amazon.com/gp/product/B01KZULYMC/

Or they offer this option where you replace all of your lug nuts with wheel locks. Seems like this would at least slow down the "hammer a socket on there" attack: https://www.amazon.com/gp/product/B01KZULYRC/