(Part 2) Top products from r/crv

This mattress that I got for it's portability. It folds into thirds which makes it easy to transport in my CR-V with all my other stuff.

Since you mentioned folding a section of the bed, this could potentially be a good option as it's designed to fold itself. Although I'm not sure if they make a bigger version that a twin or not.

This mattress seems similar in concept though, and comes in full size. And the fold pattern actually looks like it might be better too for your needs. But of course measure first.

I can't speak for the second mattress I linked, but the first one is very comfortable despite only being 3" thick. I'd guess the second one is good too.

Best of luck, and I'd definitely love to see what you come up with!

It's almost always better to go with OEM replacement headlight units if you can. This will ensure the best fitment as well as ensure that the unit meets safety standards. This however, is expensive and takes a little bit of time. It's an easier route to restore your headlight unit if it has not been damaged other than weathering and oxidization on the surface.

I've used Sylvania's cleaning kit to great effect on my friend's 2007 CR-V. This was 3-4 years ago and the last time I saw him a few months back, the headlights have barely started to show any signs of aging.

https://www.amazon.com/gp/product/B00429NKWK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I bought these of Amazon as they were the cheapest I could find. Pretty solid rails and it mounts perfectly. https://www.amazon.ca/dp/B0037ODUEO/ref=cm_sw_r_cp_apa_gdZ.zbBWVN8C7

Here's what I'm thinking of:

1. First I'm going to remove the cupholders (https://youtu.be/Vx61J5K_MFE)
   
   
2. Then stick a cooler in between the seats (https://www.crvownersclub.com/forums/17-interior/119761-2006-crv-center-console-replacement-upgrade-40-a.html)
   
   
3. Velcro or tie down the cupholders on top of the cooler (https://www.amazon.com/gp/product/B000FGIBYQ/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1)
   
   
4. Buy a 3rd party center console armrest with storage and stick it on top of the cooler either with Velcro or the tiny loop/strap tie downs they come with (still looking for this)

Radio:

Pioneer Multimedia Double-Din In-Dash 6.2" WVGA Display DVD Receiver Apple CarPlay/Built-in Bluetooth/SiriusXM-Ready/AppRadio Mode/ Spotify & Pandora WITH FREE ALPHASONIK EARBUDS https://www.amazon.com/dp/B01M4LKXRA/ref=cm_sw_r_cp_api_i_FaNZCbWNVWWM1


Dash kit:

SCOSCHE HA1559B 2007-11 Honda CRV Double DIN or DIN w/Pocket Install Dash Kit https://www.amazon.com/dp/B000YRS99S/ref=cm_sw_r_cp_api_i_TbNZCbHPAVJQ6

They are Depo Headlights I got from amazon.

Depo 317-1146PXAS2 Honda CRV Black Headlight Projector Assembly Set https://www.amazon.com/dp/B0060LUTOU/ref=cm_sw_r_cp_api_i_zvTdBb17WBCMR

The bulbs that come with these aren’t very bright so I upgraded them to halogens. For about $70 total.

I regret my Honda floor mats in my 2014 due to not quite covering enough, but not enough to spend money on replacements. Would go with the Weather Tech Laser Fit if I had a do-over.

I've no idea if it will fit in the 2018, but this fits perfectly in the center storage of the 2014: Winco BC-6 Bar Caddy with 6 Compartments
https://www.amazon.com/dp/B001EVBBKC/

I used Meguiar's endurance High gloss. Granted, some spots have heavy sun damage and i am waiting to apply subsequent coats to see if this will restore the shine in those spots as well. Some areas needed two coats to really see a change.

https://www.amazon.com/Meguiars-G7516-Endurance-Tire-Gel/dp/B0009IQXJ0

This looks like what I have my bottle is older (rarely used)
I'll report back after a few days to update!

Some screwdrivers, pliers and a socket wrench to get into the tighter spots.

I used this to power the under the seat amp
http://www.amazon.com/Circuit-ATC-Piggy-Standard-Holder/dp/B009K6U582

Replacing speakers is so easy, it took me 45 minutes tops. The head unit was a little more time consuming, but very simple if you follow instructions online. You just have to remove the whole bottom part of the dash

I like this one, it has a smaller profile and just looks like a thick plate frame. Probably isn’t as effective as the bumpshox, but it does mitigate some risk and is more appealing aesthetically in my view.

WeatherTech 8ALPBF1 Bumper Frame https://www.amazon.com/dp/B00YJIOBOA/ref=cm_sw_r_cp_api_i_ymnkDbYWZBVNA

First, you can buy a code reader for your car, they work with your phone and they're cheap: https://www.amazon.com/Bluetooth-Reader-Compatible-Android-Torque/dp/B005C6KIVS

It's possible these are all related.

https://www.amazon.com/dp/B003CT4ARK/ref=cm_sw_r_other_apap_LptnsW7L2aTOm

These are what I use.

TEKTON 5866 12-Inch Oil Filter Pliers https://www.amazon.com/dp/B000NPR33O

EDIT 6/03: Idk if you're still interested, but I have used the ones I bought to carry a bike and about 100 lbs of luggage for a 900 mile trip and they held up. No wind noise, no caps popped off, no trouble at all. I am very satisfied with these.

I just installed ones I bought off Amazon today for my 2009 EX. So far, the installation was very straightforward and easy. No problems with the size or anything feeling loose. The quality looks good, overall. I need these for roadtrips so I'm hoping there are no issues travelling 70+ for 300 miles straight. I'll be trying them out a bit and then I'll come back with a review.

Here are the ones I bought if you're curious: https://www.amazon.com/dp/B0045V8CKU?ref=ppx_pop_mob_ap_share