(Part 2) Top products from r/electricians

Jump to the top 20

We found 69 product mentions on r/electricians. We ranked the 1,753 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/electricians:

u/pr3mium · 1 pointr/electricians

I use this. https://www.amazon.com/Screwdriver-Thin-Wall-Klein-Tools-85191/dp/B000CER0T8/ref=sr_1_4?keywords=pipe+reamer&qid=1556749964&s=gateway&sr=8-4

​

It's great. It's cheap. Mine was a hand me down.

​

And if you really wanted to save money or something, I've never tried the Green Lee version but they make perfectly great tools and it's half the price.

​

https://www.amazon.com/Greenlee-9753-11C-Conduit-Reaming-Screwdriver/dp/B001HWGKD6/ref=sr_1_3?keywords=pipe+reamer&qid=1556750059&s=gateway&sr=8-3

u/fieldpeter · 1 pointr/electricians

Many thanks

Looking at the part lists, I think it is not worth it to source and swap all the individual components!

I may consider the step-down converter indeed. Any particular model/brand to recommend?
There are many variants of this on Amazon:
https://www.amazon.com/Bright-VC500W-Voltage-Transformer-converter/dp/B000MX1QXA
Good enough to use the sewing machine a couple of times a week?
THX

u/ucanthandlethetruff · 3 pointsr/electricians

My buddy has the Knipex lineman's pliers and I have to say they aren't anything special. He still uses his Kleins because they are just more comfortable to use.

I also prefer the Klein lineman's pliers but I like the Knipex for their channel locks and I REALLY like their pliers wrenches

u/FishPumpkin · 2 pointsr/electricians

Before you buy a transformer, check on the bottom of the fan or on its power adapter (if it has one) if it's rated for full-range (100-240V) use. I don't see any information in the manual for this model, but reviewers of other DC-powered fans by this manufacturer claim that the DC adapters for those are full-range.

If it's not full range, then see the following:

The manual doesn't list the amperage/wattage for this fan, but it does specify a 2.5-amp fuse for the cord. This means that at 120V, the fan can draw up to 300VA (about 300W) at full power.

With this in mind, I would recommend a 400W step-down transformer or larger. You want to use a converter with an actual transformer in it, like this one. Don't use a step-down converter with a triac (very light-weight and will usually be rated for a very high power for its size).

I would not expect the lower frequency to adversely affect the electronics, since the electronic parts will be fed from a rectifier.

u/ithinarine · 12 pointsr/electricians

Frequency definitely wont be an issue with it.

From what I've read, that sandwich press is 850w, so you're going to want at least a 1000w transformer for it, if not a 1200w or 1500w. Its really not recommended to max out a transformer. At 850w, a transformer will get quite warm very fast. Here is a 1500w transformer that will work for you.

Are you going to be happy having to haul out that 10lb monstrosity on to your counter every time you want to use your sandwich press just because you couldn't be a normal damn person and buy a sandwich press made for the USA?

u/TrashSlutArt · 1 pointr/electricians

Gator back is great these are what all the guys at the shop I’m at use https://www.amazon.com/Gatorback-B240-Electricians-Pro-Comfort-Support/dp/B011VRPBRM/ref=mp_s_a_1_2_sspa?keywords=gatorback+tool+belt&qid=1558451834&s=gateway&sprefix=gatorback&sr=8-2-spons&psc=1
I got some suspenders from Home Depot too I think they make some but it’s definitely worth picking some up, save your back and hips a lot of trouble

u/Williekins · 2 pointsr/electricians

Okay, you seem to know about German electricity.

So this transformer right here that was recommended to me, that 220V socket looks nothing like the connector on the Krups FDK 451, a quick glance at connectors and sockets make the socket I need look like, what they call, a Type F connector (but maybe one of the other ones), but that appears to have some pins on the top and bottom that can simply not exist on the socket on the device. And I going to need to obtain some sort of plug converter for that? If so, what kind should I get?

Thanks for the information about legs!

u/roninplaya · 2 pointsr/electricians

Something like this? Seems a little extreme for my use case but looks awesome!

https://www.amazon.com/dp/B004EZJMSS/ref=cm_sw_r_cp_api_i_qXPjDbRJB4JH4

u/ddubyah · 2 pointsr/electricians

Someone gave me the SOG Kilowatt, it's ok. Definitely not great on the job, and the shape of the belt clip causes it to get caught on things often. I would stay away from it. Klein makes some novelty stuff that make good gifts like this [bbq set] (http://www.amazon.com/Klein-98222-BBQ-Tool-Set/dp/B000G0ZTCS) or [bottle opener] (http://www.amazon.com/Klein-98002BT-Bottle-Opener/dp/B00093GENU/ref=pd_sim_hi_1?ie=UTF8&refRID=1FP0ARYFHQP91TDA1AMQ)

u/WyTheGuy · 3 pointsr/electricians

I don't know what kind of work you do, I do everything, and once in awhile these save the day. They aren't tools I use often but they make life easier sometimes

Screw Extractor set

Knipex Plier Wrench

Klein tube cutter

Deep sockets in small case with an Impact Adaptor

Klein cct finder

u/BlackLagooon · 1 pointr/electricians

Super green, 0 hours IBEW Inside Wireman apprentice. This is what I've got to show up with for my first day. I have an Occidental Leather Adjust to Fit 9596 tool belt and Stronghold Light 1546 suspenders in the mail, as well as a Custom Leathercraft Tool Box , Thorogood American Heritage Emperor Toe Wedge work boots , and maxiflex cut resistant gloves . I'm still undecided as to which tester/multimeter to get. Am I good to show up to work with what I've got? Am I missing anything critical?

​

Reposted to get image thumbnail

u/Polyphase1356 · 1 pointr/electricians

Without knowing what he's already got it's hard to say. He's probably already got all the basics. I'm just assuming he's already got boardsaws, tape measures, screwdriver sets, plier sets and so forth.

I'll list off a couple of things I would rather not live without:

[Irwin wire strippers] (http://www.amazon.com/Irwin-Industrial-Tools-2078300-Self-Adjusting/dp/B000OQ21CA) These are totally awesome.

[Non contact voltage detector] (http://www.amazon.com/Fluke-1AC-A1-II-VoltAlert-Non-Contact-Voltage/dp/B000EJ332O/ref=sr_1_3?s=hi&ie=UTF8&qid=1449993757&sr=1-3&keywords=Non+contact+voltage+detector)

Stubby ratchet screwdriver


u/[deleted] · 1 pointr/electricians

Knipex, these specifically. German tools are fucking awesome, for the most part. Knipex make Awesome tools. Their cobra pliers are epic as well. Not cheap, but worth it.

u/electriczap · 6 pointsr/electricians

I have been wearing the Industrial Electricians belt from Occidental for a year now, it is very comfortable. I got mine on Amazon in the used section, it wasn't touched and still had the tags on it.

https://www.amazon.com/gp/offer-listing/B0097EOXBC/ref=dp_olp_all_mbc?ie=UTF8&condition=all

u/Jemjem787 · 2 pointsr/electricians

It leads to another HDMI port, this is probably for a home entertainment system. If this port is on the ground level, look about 5ft higher (Where you might mount a TV on the wall) and it might be there, or vice versa. I have one wired in my house for a projector, so look on the ceiling as well. If you can't find one, then the connection might be under a blank faceplate somewhere, or it might not be hooked up, so open it up and see what you find.

If you are wanting to put a router in this specific spot, (Or just need a good wired internet connection), install something like THIS. It's not as good as an actual wireless connection, but i believe it would be faster than wireless.

u/danielibew952 · 1 pointr/electricians

Gatorback B240 Electrician's Combo with Pro-Comfort Back Support Belt. Heavy Duty Ventilated Work Belt (Large 36-40 inches) https://www.amazon.com/dp/B004EZJMSS/ref=cm_sw_r_cp_api_i_jGTtDb0PRKMJE

These are extremely comfortable with plenty of space for all the crap you need.

u/nanio0300 · 1 pointr/electricians

you could also for about the same price as USB receptacles get a small 3-4 outlet power strip with USB outlets build in. As a bonus they usually are also surge suppressors.


https://www.amazon.ca/Belkin-3-Outlet-SurgePlus-Protector-BST300/dp/B00ATZJ5YS

u/PM_ME_BAKED_ZITI · 2 pointsr/electricians

Those look like the alligators, I think he's referring to these which I've heard great things about but I don't quite do enough work where they'd be needed to justify them for myself.

u/AXXXXXXXXA · 1 pointr/electricians

Replacing bc old outlet lost its grip.

So then this on top

Belkin SurgePlus USB Swivel Surge Protector and Charger (Power strip with 3 AC Outlets, 2 USB Ports 2.1 AMP / 10 Watt) and rotating plug https://www.amazon.com/dp/B00ATZJ5YS/ref=cm_sw_r_cp_api_i_Wlg2CbBHJXHTC

And this on bottom outlet should be ok?


Belkin 12-Outlet Power Strip Surge Protector w/ 8ft Cord – Ideal for Computers, Home Theatre, Appliances, Office Equipment and more (3,940 Joules) https://www.amazon.com/dp/B000J2EN4S/ref=cm_sw_r_cp_api_i_Amg2CbCCQ37RH

u/IcyBend · 1 pointr/electricians

They are not as bad as you seem to think, I suggest you try them before you go smashing holes in your walls or paying a contractor to do it for you. The technology has come a long way since they were first introduced and they are surprisingly inexpensive. https://www.amazon.com/TP-Link-Powerline-ethernet-Adapter-TL-PA4010KIT/dp/B00AWRUICG/ref=sr_1_3?keywords=Ethernet+over+powerline&qid=1550021490&s=gateway&sr=8-3

Also if your wiring supports electricity it will support data no problem.

u/Swankster_ · 1 pointr/electricians

If you're going to be in heavy commercial then I like these I have them and really like them. Some other guys I work with have the Klien ones from Home Depot or these They are really expensive but will last 5+ years

u/Triskite · 3 pointsr/electricians

thanks for the reply... i have strippers that go down to 6awg, i was just wondering what folks recommend for lower gauge and/or faster speed (like this self-adjusting stripper, but for 4/6/8 gauge)

u/Methelsandriel · 3 pointsr/electricians

> Klein's journeyman series

The klein level is good, but overpriced

u/LoneWolfWi13 · 1 pointr/electricians

A couple of ways. They make an inexpensive outlets tester (6-8 bucks) that tests the outlet.

GFCI tester

Or you can take a multimeter and read from neutral to ground using resistance and it should be in a low ohm range. Like 10 or less as the neutral and ground are bonded at your service. If it's not reading low and reading open, the neutral is open on that branch circuit somewhere between that outlet box and the service.

u/stutzmanXIII · 3 pointsr/electricians

Maybe this?

Belkin 3-Outlet SurgePlus Mini Travel Swivel Charger Surge Protector with Dual USB Ports (2.1 AMP / 10 Watt), BST300 https://www.amazon.com/dp/B00ATZJ5YS/ref=cm_sw_r_cp_apa_dzgrybFGYWBSM

u/noobsmoothie · 1 pointr/electricians

Magic if you're working on smaller cables

u/Eglitarian · 1 pointr/electricians

Replacing the ceiling receptacle with one of these is also an option.

u/ChineseOverdrive · 2 pointsr/electricians

Doesn't help your current situation, but if you're looking for a quality replacement level, consider this: https://www.amazon.com/Swanson-TL043M-9-Inch-Magnetic-Torpedo/dp/B002C2SUHY Shame it's made in China, but Klein sells a rebadge of the same model level for 2-3X the price and it has been a quality addition to my tool bag. Rare earth magnets, 30 and 45 degree bubbles, and every bit as durable as a Checkpoint level.

u/Fender420 · 2 pointsr/electricians

The item you linked to pulls almost 5 amps at 110 volts which is ~500 watts. The transformer you said 'went up in smoke' was rated for 100 watts so I'm sure it didn't last very long at all. You need a simple step down transformer thats rated at >500 watts. This should work: https://www.amazon.com/Bright-VC500W-Voltage-Transformer-converter/dp/B000MX1QXA/ref=sr_1_5?s=hi&ie=UTF8&qid=1542787838&sr=1-5&keywords=500W+transformer although I'm not sure of the type of plugs used in the philipines.

u/YostwocentS · 1 pointr/electricians

These are the ones that I carry Crimping and Cutting Tool for Insulated and Non-Insulated Terminals, 9-3/4-Inch Klein Tools 1005 https://www.amazon.com/dp/B0006M6Y5M/ref=cm_sw_r_cp_apa_i_KGCqDbYFPH4W0

u/MangoMan6 · 2 pointsr/electricians

Usually that's the case. But for this specific amp meter it needs to be on the ground. I tried it the normal way, and it would just give gibberish readings. It's really bizzare.

A bunch of the reviews are complaining about it

https://www.amazon.com/bayite-6-5-100V-Display-Multimeter-Voltmeter/dp/B013PKYILS/ref=sr_1_1?ie=UTF8&qid=1521581494&sr=8-1&keywords=amp+meter+solar


I think the ampmeter works by measuring the voltage change over a fixed resistance.

Edit: Just tested. Anything after the shunt isn't measured. There's probably some sort of correcting it does to take into account the load after the shunt. Probably so it doesn't measure itself. I dunno.

Edit 2: it's included wiring diagramhttps://i.imgur.com/uXCRNyY.png

u/Yaethe · 7 pointsr/electricians

Here ya go

Slap a couple of those bad boys on the screws behind the receptacle/switch and you'll have lovely looking and flush outlets in no time.

No time = a lot of time when doing every outlet in the house

u/JayReddt · 1 pointr/electricians

Thanks for the kind words. And doesn't hurt giving important advice like shut the circuit and test it. I do know to do that but given the dangers involved... I don't mind hearing it!

Would this multimeter tool work as a voltage tester? I used it to test the current on parts of my dryer to see what needed to be replaced.

If not, any specific recommended voltage tester?

u/ChefJoe98136 · 2 pointsr/electricians

It's not exactly uncommon for someone to get sick and tired of dealing with 2 prong outlets who then shuts off a circuit and replaces the outlets with 3 prong versions that have a spot for the ground but aren't actually grounded to anything (since an outlet costs less than $1).

The proper way to deal with that (if you're not replacing wiring) is a GFCI with a tag of "no equipment ground" that can protect the entire circuit of outlets or be done at each box. Sometimes, boxes that old will be small enough that GFCIs might be tricky to fit without replacement of the enclosure.

While plenty of things can be "grandfathered", I think it's generally a code violation to have a ground receptacle that's not actually grounded. If you wanted to run down that road and raise heck, get a tester to verify. It might give you a bit more leverage in asking for at least GFCI outlet installation.

https://www.amazon.com/GE-50957-GFCI-Tester/dp/B002LZTKIU

http://communities.leviton.com/servlet/JiveServlet/downloadImage/2-1134-1005/450-141/gfcibig.JPG

u/Shag_fu · 1 pointr/electricians

Are you talking about one of these Klein Tools 85191 Conduit-Fitting and Reaming Screwdriver https://www.amazon.com/dp/B000CER0T8/ref=cm_sw_r_cp_tai_42Otzb2WQZ9KY
I see your point in potential time saving but I don't agree that it's just flat wrong.

u/WayGroovy · 3 pointsr/electricians

It is a bad idea to do this. It will likely invalidate your lease. It could cause a fire or worse.

-----

https://smile.amazon.com/Bright-VC1500W-Voltage-Transformer-converter/dp/B000MXZ2XK/ might work, but probably is still a bad idea.