(Part 2) Top products from r/essential

I'm in the US and don't know much about other AC power sources, but I can try to point you in the right direction. Here's an example of an ideal one that I'd buy myself if I needed another charger:
https://www.amazon.com/Anker-Premium-Charger-PowerPort-Delivery/dp/B01D8C6ULO

You're looking for that top port that says "USB PD" - they don't all say that, but if you look around on spec sheets you should find something to that effect. For the specs, you also want to see 9v / 3A if you want quick charge capacity. If it goes to higher voltages that nice but your phone won't use it. Ignore Qualcomm QuickCharge or QC stuff, except if it's QC4+. Anything QC4 and below is not compliant with USB-PD and Essential did not go the Qualcomm route. QC4+ is Qualcomm's latest standard and claims to incorporate all the requirements of USB-PD as well.

Bonus points: In the Q&A there's a note from Benson Leung, a Google engineer that tests the shit out of various chargers and cables. If it gets his stamp of approval then it's for 100% sure a safe and quality charger or cable to buy.

TLDR: If you can find the thing in the link with your country's AC plug you're all set. Beware cheap imitations because they can burn out your phone in extreme circumstances. Fast charging is more complex than the run-of-the-mill cheap USB chargers we've grown used to.

edit: I looked some more and the comments and reviews say it works internationally, and that looks like a standard AC cable so you should be able to swap it out for one of yours and plug it right in. I'd do some more reading but that looks like a good bet.

Best options I could find (in order of best quality to worst quality in my opinion):

Anker USB Type-C Premium 5-Port 60W USB Wall Charger PowerPort+ 5 USB-C with Power Delivery
$33 after Coupon: BESTPD55
https://smile.amazon.com/gp/product/B01D8C6ULO

Monoprice Obsidian Series USB Type-C Wall Charger 45W
$17
https://smile.amazon.com/gp/product/B078TPFKZ6

USB C Charger, CHOETECH 18W Power Delivery Type-C Wall Charger
$15
https://smile.amazon.com/gp/product/B071SHKFRB


Honestly, if I were you, I'd get either the Anker or the Monoprice, depending on your specific needs. I own the Anker and love it, but it's a bit large for traveling. I've had my eye on the Monoprice but it's been at $21 (which for a 45W charger is still cheap!). I only found the $17 price today thanks to compiling this response for you and actually ordered two for myself. It doubles as being quite sufficient for most laptops that charge via USB Type-C, which is awesome!

Hardwood has some give to it, not so much with tiled floor or concrete. Good to hear it held up, have not dropped and am not planning to drop my PH1 anytime soon. If you are looking for a screen guard this is the one I recommend, follow the 5 star reviewer's installation method, that would be me 😀.
https://www.amazon.com/gp/aw/d/B07558DWWR/ref=yo_ii_img?ie=UTF8&psc=1

https://www.amazon.com/gp/aw/d/B075B5FQCF/ref=mp_s_a_1_1?ie=UTF8&qid=1505603679&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=sopiguard+essential+matte+black

I got this one. The fit and finish is perfect. Also NO MORE SLIPPERY lol. I'll get some pics when I get home

I love Anker cables. This one is supposed to have PD support according to one of the pictures. https://www.amazon.com/Anker-PowerLine-Probably-Certified-Matebook/dp/B071WNXY1R/ref=sr_1_4?s=wireless&ie=UTF8&qid=1519316443&sr=1-4&keywords=anker+powerline+c+to+c

This one
https://www.amazon.com/gp/product/B01GKSPMCQ

Works for me under Pie, but there's some AR problems. Fiddling with SecondScreen improves it somewhat.

Haven't tried under Oreo. It could be perfect.

I have both of these and they work great

https://www.amazon.com/Anker-Delivery-Charger-PowerPort-Samsung/dp/B06Y427WT7/ref=sr_1_5?ie=UTF8&qid=1522255791&sr=8-5&keywords=anker+usb+c+pd

https://www.amazon.com/AUKEY-Charger-Delivery-MacBook-Samsung/dp/B074C2VZ2T/ref=sr_1_11?ie=UTF8&qid=1522255791&sr=8-11&keywords=anker+usb+c+pd

This one has cutouts and the reviews on the 360 working are split.
I found this on Amazon:
Essential Phone PH-1 Case, Linkertech Slim Air Armor Thin Fit Silicone Gel Soft TPU Bumper Durable Flex and Easy Grip Protective Case for Essential Phone PH-1 (Black)

https://smile.amazon.com/gp/product/B079FK7TJS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&th=1

I had the same exact problem--I also have a VW Golf. I bought this cable and it works like a charm: Anker PowerLine USB C to USB 3.0 Cable (3ft) with 56k Ohm Pull-up Resistor https://www.amazon.com/dp/B01A6F3WHG/ref=cm_sw_r_cp_apap_ELuQRDeHM44vi

Just looked at that one. In the revieews someone has a ph-1 and says it works perfectly and seems legit. What do you think? https://www.amazon.ca/dp/B075WSC1J9/ref=cm_sw_r_cp_apa_i_.AE4AbPCE4Y3E

Https://www.amazon.com/dp/B079FK7TJS/ref=cm_sw_r_cp_apa_1GeOBbZ8M4X0E

Its a nice thin case unfortunately sides are shiny and it has the pin cutouts but back is matte :)

I bought this over a month ago. It shows 'charging rapidly' every time. Works great.

Nekteck USB-IF Certified USB Type C Car Charger with PD Power Delivery 45W & USB-A 12W for Macbook 12-inch/ Pro 2016, Pixel 2/ Pixel XL Galaxy S9/ S9+/ Note 8/ S8/ S8+ More(USB-C Cable 3.3Ft Included) https://www.amazon.com/dp/B075WQQG7C/ref=cm_sw_r_cp_apa_i_ElC4AbBYXW2AX

Maybe, but I'm thinking something small that won't make the phone bigger.. maybe thin enough to fit behind the tudia cases
Similar to this idea https://www.amazon.com/dp/B06Y5FDXD4/ but not wasting the USB port

Yes, i ordered one that works 100% off Amazon for $16.99 and it includes a c-type charger port and USB-A Port...

​

https://www.amazon.com/gp/product/B01GKSPMCQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Thank you.

My 8-pack J&D screen protectors will be arriving today, so I'll see how they are. I didn't even want an 8-pack, but after hours of research, that's what was the most highly recommended to me. (https://www.amazon.com/gp/product/B073ZBNLMB)

Seconded. I have the removable cable version and have been happy with it.

https://www.amazon.com/gp/product/B075WQQG7C/

I'm sorry man it was a skinomi clear skin. I must have been really confused. I've been really happy with it so far. https://www.amazon.com/dp/B074TZHQHS/ref=cm_sw_r_cp_apa_p2ASAb6BPCPKG

I went ahead and ordered this Anker PD bank. Going over USB C to USB C, or USB A to USB C, it always charges rapidly. It comes with a USB C charger as well that's good quality, a C to C cable that I haven't had any issues with, and a nice carrying bag. It's 20,000 mAh and I've gotten 5 full charges out of it during a trip and still had juice left.

I picked it up when it was 99, but it's down to 79. Worth it in my book.

The only option to go wireless will occupy your c-port always.

A qi receiver is attached (under a case) to allow charging on a qi charging mat.

This means no headphones or aux unless you have the HD Audio accessory.

If you don't care about wired sound, you can connect to other things via Bluetooth.

Here's a link to some hardware:
Feel free to mix it up to your preferences...

Qi Receiver: [Short Version] Type C Wireless Charging Receiver, Nillkin Magic Tag USB C Qi Wireless Charger Receiver Chip for Google Pixe/Nexus 6P and Other Small Size USB-C Phones https://www.amazon.ca/dp/B06Y5FDXD4/ref=cm_sw_r_cp_apa_i_PyLTCbHAS97QJ

Car Mount: [10W Fast Charge] Nillkin 2-in-1 Qi Wireless Charging Pad & Magnetic Car Mount Holder for Samsung Note 9/8/S9/S8/S8 Plus, 7.5W Fast Charging for iPhone Xs Max/XS/XR/X/8/8 Plus - Model C https://www.amazon.ca/dp/B07CHD3X83/ref=cm_sw_r_cp_apa_i_GzLTCb4J9R7W1

Bluetooth Adapter (for non-android automobiles): Bluetooth Receiver,Mpow Streambot Wireless Bluetooth Car Aux Adapter/10Hrs Hands-Free Car Kits/Portable Wireless Music Adapter for Car/Home Audio Stereo System (CSR/HFP/HSP/A2DP/AVRCP/Built-in Mic) https://www.amazon.ca/dp/B00QX0YR7I/ref=cm_sw_r_cp_apa_i_3zLTCbHHYY7S4

Charging Mat: Jadeva Tech Desk Top 10W Wireless Charger – Qi Wireless Charging for Samsung Galaxy S9/S9 Plus/NOTE 8/S8/S8 Plus/for Samsung Galaxy S7/S7 Edge/Samsung Galaxy S6 / S6 Edge / S6 Edge Plus / Samsung NOTE 5 / Iphone 8/Iphone 8 Plus/Iphone X https://www.amazon.ca/dp/B07DZLJ6G8/ref=cm_sw_r_cp_apa_i_nBLTCbC3ACCNV

Yeah that's the sad truth. I'm using this one: [8-Pack] Essential PH-1 Screen Protector, J&D Premium HD Clear Film Shield Screen Protector for Essential PH-1 https://www.amazon.com/dp/B073ZBNLMB?ref=yo_pop_ma_swf

I think we're going to be out of luck in the tempered glass department due to the curves on the edges. I ordered https://www.amazon.com/gp/product/B0751MV6LK and this https://www.amazon.com/gp/product/B073ZBFDM3 - haven't received either yet.

So I have a 2018 Impreza, AA never worked, bought this, https://www.amazon.com/dp/B01A6F3WHG?ref=yo_pop_ma_swf

And it connects instantly. Hope this helps.

Essential PH-1 Phone Case,Feitenn Essential Premium Flip Leather PU Wallet Smart Case Stand Kickstand Card Holder Magnetic Silicone Clear TPU Bumper Slim Thin Cover Case for Essential phone PH-1 Grey https://www.amazon.com/dp/B077GQ3QKB/ref=cm_sw_r_cp_apa_OR5JAbXSTXVZX

I use this: https://smile.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 with Incipio NGP clear case.

You have to use a USB PowerDelivery charger, as this phone doesn't have QuickCharge technology. I'd recommend these (none are affiliate) cables car charger and I typically use the stock charger brick, but I believe that this one should work, but I haven't used it.

I think the wires inside the braided sheath torque themselves to failure. I would stay away from small diameter braided cables for usb-c(OEM cable size).

Recommend this anker USB PD for its protected neck

Just checked Amazon and they have the phone + 360camera for $399, possibly only for cyber Monday.
https://www.amazon.com/dp/B075TNZDC7/ref=cm_sw_r_cp_apa_XLchAbSQ4M8VM

I recently picked up one of these for wireless charging, and it's worked really well for me. I use it with this case, but you could use it with any case, so long as it was thin enough

Actually, might have sent the wrong link (sorry!) this one says the $399 (USD) deal is on for a few more hours - hope you get in before the price jumps back up!
https://www.amazon.com/gp/product/B075TNZDC7/ref=od_aui_detailpages00?ie=UTF8&th=1

Saw this posted on xda, bought it today.

SopiGuard Essential Phone PH1 Carbon Fiber Rear Panel Precision Edge-to-Edge Coverage Easy-to-Apply Vinyl Skins (Matte Black)

https://www.amazon.com/dp/B075B5FQCF/ref=cm_sw_r_cp_ep_dp_.LdWzbGQNC7V3

https://www.amazon.com/Essential-TUDIA-Lightweight-Absorption-Featuring/dp/B077FH5H29/ref=sr_1_14?s=wireless&ie=UTF8&qid=1549317419&sr=1-14&keywords=essential%2Bphone%2Bcase&th=1

This one has a temp glass back panel to keep the premium look somewhat front and center.

This one is actually available
https://www.amazon.com/gp/aw/d/B075WSC1J9/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

Verified by the USB Implementors Forum and independently tested by Nathan K: https://www.amazon.com/dp/B075WSC1J9/ref=cm_sw_r_cp_apa_XohHAbBM9C4F1

I've not tested the desktop mode (not enrolled in the beta) but can't see why it wouldn't work with this.

https://www.amazon.com/gp/product/B01GKSPMCQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

​

I've been able to screen mirror with it. I can also do power+video+data through it.

I just ordered this one today. I'll keep everyone posted once I receive it.

And look at that, /u/Soifon99, it is cheaper now!

I'm thinking about ordering this https://www.amazon.com/gp/aw/d/B071WNWRNC/ref=ox_sc_act_image_1?smid=A294P4X9EWVXLJ&psc=1

How about this one https://www.amazon.com/Essential-TUDIA-Polycarbonate-Protective-Compatible/dp/B079CN8HCM/ref=sr_1_6?s=wireless&ie=UTF8&qid=1539574723&sr=1-6&keywords=tudia+essential+phone+case

https://www.amazon.com/Essential-TUDIA-Polycarbonate-Protective-Compatible/dp/B079CN8HCM/

Multiple port-USB Type-C, Anker Premium 5-Port 60W USB Wall Charger PowerPort+ 5 USB-C with Power Delivery for Apple MacBook, Nexus 5X / 6P and PowerIQ for iPhone, iPad, Samsung & More https://www.amazon.com/dp/B01D8C6ULO/ref=cm_sw_r_cp_apa_PgYaAb24NBWGZ


Single port-Anker USB Type-C with Power Delivery 30W USB Wall Charger, PowerPort Speed 1 for Nexus 5X / 6P, LG G5, Pixel C, Samsung W700, MacBook 2015 / 2016, Mate Book, Moto Z and more https://www.amazon.com/dp/B06Y427WT7/ref=cm_sw_r_cp_apa_jhYaAbQ6XZEZD

https://smile.amazon.com/gp/product/B079CN8HCM/

Slimmest hard case available for the phone.

Nah, two of the ones in two packs.

https://www.amazon.com/gp/product/B07558DWWR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0751MV6LK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Side note - other than the exterior packaging, the internals appear to be exactly the same.

fwiw I have this case, and have dropped my phone several times from chest height and no crack.


Note: Small sample size / anecdotal / non-scientific evidence

This is what I have. Even comes with a charger. Can't recommend it enough. Charges both USB A and USB C, Simultaneously.

Anker PowerCore Speed 20000 PD, 20100mAh Portable Charger & 30W Power Delivery Wall Charger Bundle, Input & Output Type C Power Bank for Nexus 5X 6P, LG G5, iPhone 8 / X and Macbooks https://www.amazon.com/dp/B071WNWRNC/ref=cm_sw_r_cp_apa_dN1FAbNNQKSGH

I have the Tudia Glost and Tudia TAMM cases. Neither are too bulky and they both have excellent buttons.

Glost looks better and has smaller sides, so it's easier to touch the extreme sides of the screen. I find that a lot of dust gets trapped in the top speaker cutout. The back is very slippery, which can make it fall off of magnet car mounts when you go over a bump. It'll slide around on the magnet quite easily. It's slippery enough that on regular table I can spin the phone on its back and it spins probably 12 - 15 times with a weak push.

The TAMM case is much grippier, which is great. The sides are a bit bigger and sometimes that makes it more difficult to touch the sides of the screen. The fingerprint sensor cutout feels nicer (it's smooth, whereas it's a sharp corner on the Glost case). The case has some ugly styling on the back, but it's better than in the pictures on Amazon.

I currently have the Glost case on due to the side touch problems with the TAMM, but I'm going to try to cut the TAMM's side pieces a bit. Without that flaw the TAMM is a more functional, but uglier, case.


https://www.amazon.ca/Essential-TUDIA-Lightweight-Absorption-Featuring/dp/B077FH5H29/ref=sr_1_4?ie=UTF8&qid=1518030433&sr=8-4&keywords=essential+tudia+glost


https://www.amazon.ca/Essential-TUDIA-Carbon-Lightweight-Absorption/dp/B0762F2T19/ref=sr_1_1?ie=UTF8&qid=1518030427&sr=8-1&keywords=essential+tudia+tamm

tudia has a ceramic-feel "bumper" case but it's a pre-order and I'm a little skeptical how it'll hold up. The back is tempered glass and the sides are a rubber/TPU bumper. The back might not help improve grip any, but the sides should. And a tempered glass back? How would that hold up after drops? Is it useless when the back shatters/cracks?

Also...

>dry fingers just can't grip...

Try wet hands. This phone becomes a wet bar of soap in the shower.

I swear by Skinami skins - 1/5th the cost of Zagg and free warranty replacement everytime - including FREE shipping! At first, I had a glass screen protector on my essential phone but as others have reported - BAD CHOICE! The edges do not stick and you get a nasty outline all around the perimeter of the screen. I ordered my Skinami screen protector on Amazon and it was at my house a couple days later - unfortunately, its not a prime item yet.

https://www.amazon.com/gp/product/B074TZHQHS