(Part 2) Top products from r/genesiscoupe

Intake is easy enough. Exhaust can be done in sections really. You can do a rear cat delete or full depending on your inspection laws as it messes with your 02 sensor. The exhaust comes from the engine, (headers) down to (down pipe) the first catalytic converter (looks like a mesh wrapped pumpkin, sort of) then there is a bolt that attaches to the secondary cat (another pumpkin). This is the easiest to get rid of as it's just 4 bolts and there are a good amount of delete pipes for this part that sound awesome. [Ark] (https://www.genracer.com/ark-performance-straight-test-pipes-3-8-genesis-coupe-2010-2016/?utm_medium=googleshopping&utm_source=bc&_vsrefdom=adwords&gclid=Cj0KCQjwhrzLBRC3ARIsAPmhsnVassOi6e2hgo6UdOKYJUPTTXsorDA6ffpY8znERbh7a7sJ5F6WJjMaAl_REALw_wcB) is the one I'm looking at if I don't straight pipe (0 cats and muffler = louder then hell!) my car through a custom exhaust. [Magnaflow] (https://www.magnaflow.com/) is pretty popular for the last section that usually includes your muffler (that suitcase looking thing under the rear bumper)

Lights I'd just do led conversations if your plastic is clear. Aside from going with a bk2 (this designation is between different years of the Genesis. You can actually find this on your key if you take it out of the key fob you're a bk1 like me) I haven't found any good aftermarket headlights that have reviews other then "these stopped working after x months. You can do the led conversion on the interior for cheap. [These are the ones I got.] (https://www.amazon.com/dp/B00DZ36RLA/ref=cm_sw_r_cp_apip_K2b64PuXdgJ5z) If you go this way, be VERY careful putting the board leds in as I almost broke one rushing it. If it doesn't turn on the first time flip the led as it doesn't have a - + indicator.

Other small things [door knock stopper] (https://www.amazon.com/dp/B00TY5QKMO/ref=cm_sw_r_cp_apip_hiC5yd85Np2rz)
[Emblem replacement] (https://www.amazon.com/dp/B01985Z9CQ/ref=cm_sw_r_cp_apip_4LrDJLIphrpmr)

I could go on but I've been told I'm obsessive when it comes to finding exactly what I want. I'll answer any other question you have to the best of my ability.

Yeah, they really look nice on our cars. I'm super happy with them so far. Braided brakes lines would have completed it but I didn't think about it until the friend that was helping me mentioned I should replace the rubber lines with braided lines.

Price on Amazon wasn't too bad either. Rears and fronts.

I just recently installed an aftermarket headunit in mine. Feel free to ask any questions. As for your questions...

1. Absolutely
   
   
2. Yes, aftermarket headunits don't use the wires from the stock harness that power that adapter. There is an adapter that is supposed to work for it, but I didn't have any luck. I ended up buying a long charging cable for my phone and a long AUX that I ran from the headunit to the armrest cubby and it just comes up through the bottom of it. I can get you pictures if you'd like.
   
   
3. View below
   
   Here's what I bought:
   
   

• Headunit, obviously: http://www.kenwood.com/usa/car/navigation_multimedia/dnx574s/
  
• New console (need): https://www.amazon.com/gp/product/B0047XWAOU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
  
  
• Wiring Harness (don't have to have it, but I highly recommend it): https://www.amazon.com/gp/product/B001JT02PO/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
  
  
• Antenna adapter (to keep FM radio): https://www.amazon.com/gp/product/B0052IJDFS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  
  I also purchased a USB/AUX retention adapter but couldn't get it to work, apparently not many people have success with it: https://www.amazon.com/gp/product/B00JYTMTQQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  
  Again, I also purchased a steering wheel control adapter but couldn't get it to work: https://www.amazon.com/gp/product/B00B4PJC9K/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Just did a hand-wash with microfiber towels, wiped the car dry, and then used a product called Nu Finish for the wax. It's like 10 dollars a bottle and is super easy to use - I poured the liquid on the damp towel I washed the car with to apply the wax, then let the wax dry to a haze, and then buffed out with a dry microfiber towel. Wash/wax took about an hour to do myself, which is worth it considering how long a the Nu-Finish stays on.

EDIT: Amazon link

https://www.amazon.com/gp/aw/d/B000BPSW7C/ref=mp_s_a_1_1?qid=1465775620&sr=8-1&pi=SY200_QL40&keywords=Nu+Finish&dpPl=1&dpID=41TQElpWDtL&ref=plSrch

reverse

Something like this for interior.

And these are what I've been using for turn signal, but you're going to need a set of resistors if you do LED blinkers.

For rear, I would recommend the Diode Dynamics Tail as Turn Harness. It also gives you the ability to have twice as many reverse lights. shit is bright.

Ok, first off, "the emblems are recessed"... what?
The spaces where the emblems go on the car are recessed, yes, the emblems (unless you have some weird ones) are not.

If you have emblems like this, they will fit just fine on the trunk, and on the front it's a little tough because the wings that come out to the sides sometimes bump the ridge on the grill around the recessed area. While I pushed mine on and just made really sure that it stuck, without any issues for the last year, you can also shave the back sides of the wings a little with an Xacto or something.

If your wings are like this then you got the wrong ones. That's for the sedan.

Sorry, I've forgotten the exact sizes of the bolts on the ECU & TCU carrier but I do recall that I had to buy this extension to be able to reach the 2x 10mm screws that hold the carrier in place within the engine bay
https://www.amazon.com/gp/product/B00943AKH2

This youtube vid might help you (mind you I got a 2014 2.0t like this vid but it should be relatively the same)
https://www.youtube.com/watch?v=5lMxWcYMI3Y

EDIT: Ok, the video says all the bolts on the carrier and the ECU are 10mm

Get a bass knob. I put mine in and love the ability to change it depending on the song or music type

The OEM rubber mats aren't a bad choice. You can order them straight from Hyundai for about $60. I went through their Amazon vendor. They aren't meant for the 2010, but they still fit. I know because I have a 2010. Genuine Hyundai Accessories U8130-2M100 Front All Weather Floor Mat for Hyundai Genesis Coupe https://www.amazon.com/dp/B008KZK8F4/ref=cm_sw_r_cp_apip_g18VEiEKoGcJG

Check this video out https://youtu.be/OmUYXIf6F1U it is short and shows you how to replace it.
The part is like $10. https://www.amazon.com/d/Automotive-Brake-System/Hyundai-93810-3K000-Brake-Light-Switch/B008Z1NEUO

At the very least check it out, if you have a multimeter see if you can ohm it while it is disconnected to see if the switch works and closes the circuit or if it is hit or miss. If it is hit or miss replace it. For $10 that is much better than getting in a wreck due to your lights not working right.

Scosche MAGDM Magnetic Dash Mount Moblie, https://www.amazon.ca/dp/B00I3E17RA/ref=cm_sw_r_cp_apa_i_JSm4CbWBZKJH4

I use this, stick a magnet on the back of your phone case or inside. Stuck the mount anywhere on the dash that suits you and there ya go.

Also use this in my Del Sol. Only ever had my phone fall when I don't put on there properly or hit a huge bump in either car.

This is the fluid I put in mine.
https://www.amazon.com/Pentosin-1058206-ATF-1-Synthetic-AutomotiveTransmission/dp/B00JMAQ0LW

This is what the dealer will sell you for about $80 dollars a quart:
https://www.amazon.com/ZF-LIFEGUARD-6-TRANSMISSION-FLUID/dp/B0060X5NQW

DASH KIT FOR NAV VERSION

KEEP INTEGRATION AND STEERING CONTROLS HERE OR PAC VERSION

SPDIF for stock amp tie-in if you want

https://www.amazon.com/Dupli-Color-EDE161607-Ceramic-Pontiac-Metallic/dp/B00296DY7O

Here is the mobile version of your link