(Part 2) Top products from r/mflb

Jump to the top 20

We found 46 product mentions on r/mflb. We ranked the 181 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/mflb:

u/NURPNURPNURPNURP · 1 pointr/mflb

I just posted this in another thread, but I love my pill crusher for getting a find grind, and its much easier than the quarter in a pill bottle method. and doesn't take long at all. I even like it more than the finishing grinder.

It can also store ground herbs for the next trench or two. This is the same one I use, I think I paid $5.

http://www.amazon.com/Cut-Crush-Pill-Splitter-Crusher/dp/B000E0ZHFO/ref=sr_1_7?ie=UTF8&qid=1405655850&sr=8-7&keywords=pill+crusher

u/[deleted] · 2 pointsr/mflb

Pelican 1020 is what I am using. I like it. Link to solid black. You can save a few bucks if you don't mind a clear top lid. Water proof, smell proof (when closed), and pretty much indestructible.

u/mrshll · 2 pointsr/mflb

You can get something like these and pack the ABV in them as well. They look like just some shit you'd get from a health food store and as long as you have food/drink in your stomach when you take 'em, you won't have any discomfort. Two or three will treat you like a nice sized brownie would.

u/ClimbinHigh · 9 pointsr/mflb

X-post from r/trees. This was in the comments there but I'll post it here too: Here's a link to a Dropbox with the schematic. It was made in Autodesk Inventor and I'm not sure if any other 3D CAD program can run it. The overall diameter of the part is slightly bigger than the tube it went in (link to Amazon), so it required some sanding and rolling on a hot skillet to mold it perfectly. Also, it took a while to cut off the base that the printer puts down before it actually prints the part. It took 2 hours to print and about 4 hours of refining afterwards to get it perfect.

u/jkmugs · 0 pointsr/mflb

As far as I know the launch box is the only vape that uses AAs. Here's some cheap ones I like better than the regular magic flight batteries (just have to take the casing off)
https://www.amazon.com/dp/B06X9F27GV/ref=cm_sw_r_cp_apa_i_W.xBCbHEMF1C7

u/Aqkchua · 3 pointsr/mflb

It's perfectly safe. You're not breaking any seals on the battery. It's literally just a plastic wrapper. [I use these batteries. The plastic comes off effortlessly.](EBL 8 Pack AA 2800mAh Ni-MH Performance Rechargeable Batteries https://www.amazon.ca/dp/B01DZYSK72/ref=cm_sw_r_cp_api_AxyNxbXDY2C1V)

u/watershot · 1 pointr/mflb

Get one of these and preferably some coconut oil, it's super efficient.

u/wedinbruz · 2 pointsr/mflb

I'm pretty sure I got 10 feet from here when I made mine, but searching amazon for "food safe silicone tubing" will give you plenty of options. My "orbiter" was functional and cheap--I had the mason jar lying around already. I've used the tubing for 2 jar-bubblers and some whips now, and it works just fine! I don't have some horrible silicone inhalation disease, at least.

u/PiMpMySaLaD · 1 pointr/mflb

Get an instaspark on amazon. Just do that it use to be around 25 might be cheaper now. Its a CNC cut grinder I've been using it for 2+ years its great. Got it on amazon.

Edit: here it is
its 12.99 it works amazing IMO I vape so I like a really fine grind and it does that. I mean you have to clean it every once in a while but that's normal

u/1ird · -1 pointsr/mflb

I got a two piece space case, does the trick just fine. Don't listen to everyone telling you that you need to turn your herb to complete dust to vape it properly. A space case will do the job.

http://www.amazon.com/SPACE-Grinder-Magnetic-Small-Titanium/dp/B004G3PM3W/ref=pd_sim_k_1

This grinder is the one I have and it is perfect.

u/itsjib · 3 pointsr/mflb

https://www.amazon.com/gp/product/B06X9F27GV/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

these are worth looking at too. I've purchased both these and the ones I originally linked, I honestly can't think of any difference in terms of performance/longevity

u/N_Taylor · 5 pointsr/mflb

I grind 2-3 grams in my Space Case 4-piece, then let it sit in the grinder for a day or two before re-grinding in the Finishing Grinder. The stickiness is gone and there is no gumming.

The Finishing Grinder is the exact size to fit onto the top of a Space Case Stash Case .... and now there are 2-3 grams of finely ground dry herb ready to be vaped.
http://www.amazon.com/gp/product/B004MMZTP8

YMMV, -Nick

u/AmpGuitarChase · 3 pointsr/mflb

So are these good for putting AVB in, then?

u/marbles1112 · 1 pointr/mflb

I left out a crucial piece of information... I have a larger grinder that is much better. In fact it was also quite cheap, cheaper than the little one!

http://www.amazon.com/gp/product/B007JLVOQW/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

u/Omega192 · 1 pointr/mflb

I bought a cheap 4-piece grinder on Amazon (I think it was this one, it was the same brand: http://www.amazon.com/Indian-Crusher-Piece-Tobacco-Grinder/dp/B007JLVOQW) and if you use the "upside down grind" technique you can get grinds that rival the finishing grinder. I might have pictures of the grind quality somewhere if you're interested.

u/Ding08aBaby · 3 pointsr/mflb

I got the Pelican case, 2012 MFLB kit, 4 pack of powerex 2700's, and grinder from Amazon.com about a month ago. the other pieces I pretty much scrounged around for.

u/21TQKIFD48 · 1 pointr/mflb

This is what I bought at a local compounding pharmacy. As long as I chase it with a good meal, I haven't noticed any drawbacks to it, aside from the fact that the preparation is a little more work.

u/wisebeardedman · 2 pointsr/mflb

Don't know why you're being down voted...these are all sites where you can purchase them. I actually bought mine on Amazon simply because I had a gift card to spend.

u/kushnugs_ · 2 pointsr/mflb

http://www.ebay.com/itm/Magic-Flight-Launch-Box-Portable-Vaporizer-MAPLE-CHERRY-WALNUT-FINISHING-GRINDER-/201082360467?pt=LH_DefaultDomain_0&var=&hash=item2ed1715293
I've been talking to pat all day. This is seriously a hell of a deal for the cherry and walnut with finishing grinder.
Then I went to Amazon and got this.
http://www.amazon.com/gp/product/B00CP6X9B4/ref=oh_details_o00_s01_i00?ie=UTF8&psc=1
And it came with a pollen press and had a digital scale next to it for 10 bucks. I had a gift card so I got it for free!

u/DylannL · 2 pointsr/mflb

You can order a stem online from amazon. Here's the link!

u/lokbok · 1 pointr/mflb

You can get another one from Magic-Flight for $15. Personally, I'd just purchase one of those Eneloop sets that come with 4 batteries and a 4 battery charger. Those allow you to independently charge 4 batteries at once and the chargers themselves are actually highly rated by this Amazon reviewer (NLee Engineer or something) who specializes in battery chargers.

http://www.amazon.com/Panasonic-K-KJ17MCA4BA-Individual-Rechargeable-Batteries/dp/B00JHKSMJU/ref=sr_1_2?ie=UTF8&qid=1463413150&sr=8-2&keywords=eneloop

I have at least 2 or 3 extra Magic Flight chargers I'm not using. I can look for em and send em your way but don't hold your breath on that. They're all still packed somewhere in a box I've had stored away since moving.

u/turlian · 3 pointsr/mflb

Grind it up and put it into gel caps. These are the ones I use, and it works out to about .25g per cap.

u/Shaprepenr · 3 pointsr/mflb

I found this. 250 capsules for ~4 bucks!

u/xENTx · 1 pointr/mflb

This is what I use; $4 shipped w/Amazon Prime.]

u/SinfulCheeze · 1 pointr/mflb

Hey sorry I didn't answer for so long. I got mine here. Internal diameter must be 1/4 inch to accommodate the stem. I went with an overall diameter of 3/8 inch. The skinnier stuff is a little cheaper I think but you don't want it to be too skinny or else it'll fold in on itself.

u/Internetwarrior420 · 2 pointsr/mflb

Link if you want to buy gel caps

size 000 (largest) - http://www.amazon.com/NOW-Foods-000-Gelatin-Capsules/dp/B0013OXB1W

size 00 (a bit smaller) - http://www.amazon.com/Capsule-Connection-wholesale-Gelatin-Capsules/dp/B00428B6X6

I havent tried any of the gel caps, gonna try it when I get my new box.
But from what i've heard most people prefer size 00 instead of 000 because the 000's can be a bit difficult to swallow.

/e. Just bought a 100-pack, gonna try them out asap (about 3-4 weeks)

u/Fluffy_Fsh · 28 pointsr/mflb

If you dislike the taste, get some gel caps like these - just fill them up and swallow, no taste.
THEN have a nutella sandwich. Because that shit's delicious...