(Part 2) Top products from r/moto360

i did the same thing and needed extra links. i contacted motorola and they were pretty good about sending me extra links. while you are at it i would ask them to send the plastic end pieces that attach the band to the watch. these can crack. if you have to add links you may want to get a tool off of amazon that will help you with this. also this tool can help getting the spring bars off and on.

fyi, in order to get these parts you will most likely need to give them the watch's ime number (serial number) so i'm not sure you can preemptively start the process with them.

initially i called them after normal business hours and got support from a foreign call center. this was kind of "iffy" so i sent a follow up email. the email correspondence went well.

also, being that the band was too small, i could tell that the previous owner removed a link, i contacted the ebay seller asking for extra links (initially). they responded that they did not have them and offered a refund or a discount. i think there are different vendors selling the refurb moto 360 1st gen so ymmv.


good luck.

I recommend the "Supower" bands from Amazon.

It's only $11 and has lasted me months, so far, with no issues. The band is comfortable around the wrist, and the band isn't too long (like the TYLT strap from Motorola). Very easy to clean after a workout, as this was the reason why I bought it in the first place. Plus, the quick release pins allows you to swap out bands easily.

I started a thread about silicone straps a little while back and got some other recommendations if you want to check them out too.

Feel free to message me with questions.

I know you want OEM, but, just an FYI, I tried this cheap one from Amazon that I had gotten for my Nexus 5 and it works great.

http://www.amazon.com/Wireless-Charger-Enabled-Charging-Smartphones/dp/B00EM2CMT4/ref=pd_sim_sbs_cps_5?ie=UTF8&refRID=0KPJXP3T5QSDB3NE0YR3

It's small, round, cheap, and the phone fits perfect in the middle. Charges with no issues.


EDIT: Amazon changed the item I linked to, updated to the right one.

Sizing the metal band is very straight forward. I love watches and being able to do things by myself so I bought a watch repair kit for £2 off of Amazon. This is the kit I got, it was on sale when I bought it, I only use the hammer and pins. I got it simply because going to the jewelers and being charged £10 to get a watch band adjusted is ridiculous. I have used it countless times since then and I definitely got my moneys worth.


The black band will get scratched over time, it is impossible for it not to. But the good side is that they typically get scratched on the bottom, and on the inside of the band (depending on the clasp used), so you will never see it unless you want to.

I believe third party Qi charger works, like this one, while waiting for the replacement to come in:

http://www.amazon.com/dp/B00F6SQ1D6/ref=cm_sw_r_udp_awd_ALriub0288NVP

Cheap and very popular. I have the same one, though I am still waiting for my watch too actually arrive. Will be using this for travel.

Btw, who gave you the run around? Motorola or Google Play?

I got the first link for a rubberized band. Works well and looks great. Pirpos build fot this waych too. I also have the Steel connect so i constantly switch out to a black metal band, second link, and the stock leather one. As you can see I am a big fan of the black on black look, same as my phone and all the other accessories i own.

http://www.amazon.com/dp/B00SEC3AS0/ref=cm_sw_r_udp_awd_TRydvb17R9YTM

http://www.amazon.com/dp/B00PJMOMCG/ref=cm_sw_r_udp_awd_vUydvb18P00BA

I had no luck finding an original Moto band. This was a nice replacement and has held up well so far. Also has quick release:

https://www.amazon.com/gp/product/B01KD8JCBG/

Amazon has a brand called Barton on it. Check them out. I love mine from them.

BARTON Quick Release Top Grain Leather - Choose Color & Width (18mm, 20mm or 22mm) - Saddle Brown 20mm Watch Band https://www.amazon.com/dp/B01KD8JCBG/ref=cm_sw_r_cp_apa_6WWgzbG7G7NJG

I got this one. Its not a quick release so you'd need to buy the pins/tools to install it but it looks and feels great. Never pulls on my arm hair.

Hadley-Roma Men's MB3838RASE 20 20-mm Black Heavy Mesh Stainless Steel Watch Strap https://www.amazon.com/dp/B005EJFWRI/ref=cm_sw_r_other_awd_dYyKwbD8X4Q3C

Pretty sure your jeweler took out the pins and the sleeve that holds the pin tight fell out and he didn't know. If you don't have the sleeve then the pins will be loose. You can probably get new pins and sleeves from Moto.

I got the following kit to do it myself. Pretty simple job with the right tools.

http://www.amazon.com/gp/product/B002Q8AJSM/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

Dark wire mesh band looks pretty sweet. http://www.amazon.com/gp/aw/d/B00PVQVIX6/ref=ox_sc_act_image_2?ie=UTF8&psc=1&smid=A2JMKIJCHMQZ50

ASIN was B00DE8JX62. Good luck!

http://www.amazon.com/dp/B00DE8JX62/ref=pe_385040_127541850_TE_item#featureBulletsAndDetailBullets_secondary_view_div_1420011766612

I asked on /r/Watches if they had any ideas earlier today, and one user pointed out that with the way the links are curved, it would be difficult to find anything that fit it so well. I personally just ordered the Pebble's metal band, as it looks pretty good (and similar to Motorola's) and its only $20. This looks identical to the Pebble's metal band, and its $6 less.

This one is pretty nice http://www.amazon.com/gp/aw/d/B00K8HGB08?cache=703e7f465343a2901023d9de1c59aff6&pi=SX200_QL40&qid=1410586248&sr=8-2#ref=mp_s_a_1_2

I know you mentioned a small flathead screwdriver, but I've been using this set since my Pebble days. The notch in the pin pusher is good for preventing the pusher from slipping and scratching the watch, and holding onto the pin once it releases so it doesn't fly across the room. The pin remover is also not bad for removing links on metal bands.

It is important that you see 'Verkauf und Versand durch Amazon' on the product page :)

Black:
http://www.amazon.de/Motorola-Smartwatch-Edelstahlgeh%C3%A4use-schwarzem-Echtlederarmband-dark-chrome/dp/B00N3VH3VM/ref=sr_1_2?ie=UTF8&qid=1412844736&sr=8-2&keywords=moto+360

Silver:
http://www.amazon.de/Motorola-Smartwatch-helles-Edelstahlgeh%C3%A4use-Echtlederarmband-light-chrome/dp/B00N3VH3VC/ref=sr_1_1?ie=UTF8&qid=1412844736&sr=8-1&keywords=moto+360

i ordered the Xiemin steel watch band in dark metal
Thank you all for your feedback! :)

I bought a powerbot charger on amazon a while back. Works great with my v1.

Just need to make sure the watch is centered on the charger, otherwise it goes really slow.

PowerBot® PB1020 Qi Enabled Wireless Charger Inductive Charging Pad Station for All Qi Standard Compatible Devices Including Samsung, iPhone, Nokia, Google, Nexus, LG, HTC and Other Smartphones with Receivers (AC Adapter Excluded. 2 x Micro USB Cable Included), Blue on Black https://www.amazon.com/dp/B00F6SQ1D6/ref=cm_sw_r_other_awd_SetywbDY0DS80

EDIT: Here's a better shot of the watch, with a more fitting watchface (IMHO).

Pick it up here, but beware that you're going to have to push pretty hard to get it in.


^Obligatory: ^that's ^what ^she ^said.

$11 on Amazon with Prime. Can find them on eBay from China for $7.95. I own 3 and lovee them. Excellent quality.

https://www.amazon.com/gp/aw/d/B019C6NYFU/ref=mp_s_a_1_fkmr3_2?ie=UTF8&qid=1473259911&sr=8-2-fkmr3&pi=SL75_QL70&keywords=360+v2+silicone+band#mobile-twister_color_name_1473259935743

The Moto 360 requires watch bands that have a notch cut out of them (entirely unnecessary, probably just to sell more watch bands.) Watch the youtube link below to see what I mean. The simple fix I did is just to simply cut/break off the plastic ridges in the band cavity that are preventing the strap from going in all the way. They are really easy to break off with a utility knife or screwdriver. Then any new watch band can go in easily as long as it's not too thick.

By the way, I have small wrists at 7" circumference.

This is the YouTube video I watched:
https://www.youtube.com/watch?v=uha1KfHLAEs&list=WL&index=10

This is the band on Amazon:
http://smile.amazon.com/gp/product/B00EFDTYMI

Love the SnuG bands. I also bought the matching color for the watch face

https://www.amazon.com/SnuG-Watch-Bands-First-generation/dp/B00SEC3AS0

I bought some nice quick release spring bars from Amazon.

Edit: https://amzn.com/B00Q7XE866

Sounds like the internal coil spring in the band pin may have broken. As /u/PMmeYrButtholeGirls said, they should be easily replaced. Something like this should work.

Yikes! Good to know that it can be "over" heated ... Sorry about your troubles... :(

FYI - I found this replacement back cover on Amazon for $14.95 : https://www.amazon.com/gp/product/B075FDZ3V4/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A1Q9Q1EHB0XK1A

I have this:

http://www.amazon.com/gp/product/B0172VS434?psc=1&redirect=true&ref_=od_aui_detailpages00

It is very good

I was able to fit this same band, but with lots of effort. I had to carefully shave down the ends, add the notch, and do a couple other things. But I got it to work! Keep trying!

This one, right?

Looks like I exxaggerated, it was $12...

http://www.amazon.com/Wireless-Charger-Enabled-Charging-Smartphones/dp/B00EM2CMT4

I like the jp leatherworks panerai I use the one below, but I encourage you to explore. Don't limit yourself. I've had my band for 2 months no cracking no issues.

http://www.amazon.com/Panerai-Style-Leather-Stainless-Buckle/dp/B00CIIHIWK

I got the band at amazon here link. It even comes with the tool to remove the band. It's definitely not as nice as the stock band, but it gives it a different look.

Check amazon here's one without stitching.

http://www.amazon.com/Replacement-Genuine-Leather-Specially-Smartwatch/dp/B00QRHSVF6/ref=sr_1_3?ie=UTF8&qid=1421667312&sr=8-3&keywords=moto+360+leather

I have a dremel at my school I can use. I will check for that notch before I buy though.

Edit: so this wont work: http://www.amazon.com/gp/product/B005EJFWRI/ref=s9_psimh_gw_p241_d0_i5?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=02JSXKBQFSSSKNS2GV2P&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

I've ordered mine from amazon.de, (live in denmark)

Hurry and do the same! http://www.amazon.de/Motorola-Smartwatch-helles-Edelstahlgeh%C3%A4use-Echtlederarmband-light-chrome/dp/B00N3VH3VC/ref=sr_1_1?ie=UTF8&qid=1417441295&sr=8-1&keywords=moto+360

A watch repair kit has everything you need.

Yea i see these https://www.amazon.com/gp/aw/d/B016Q8QSEQ/ref=mp_s_a_1_1?ie=UTF8&qid=1480454981&sr=8-1&pi=SY200_QL40&keywords=moto+360+2nd+gen+band&dpPl=1&dpID=417NJqPcn%2BL&ref=plSrch

https://www.amazon.com/gp/aw/d/B018S8BZAY/ref=mp_s_a_1_12?ie=UTF8&qid=1480454981&sr=8-12&pi=AC_SX236_SY340_FMwebp_QL65&keywords=moto+360+2nd+gen+band

Thisor this... Or others

Its a little pricey. http://www.amazon.com/gp/product/B00LTPPN9I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I got this Motong - http://www.amazon.com/gp/product/B0172VS434.

A couple other reviewers had problems that I suspect resulted from their not placing it correctly. I applied mine under a lighted magnifier so it's perfectly centered which is important.

Sorry :(

https://www.amazon.com/gp/aw/d/B018S8BZAY/ref=s9_qpp_gw_p107_d3_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=mobile-1&pf_rd_r=NRKD63869HRJ00PF3CEQ&pf_rd_t=36701&pf_rd_p=2068141862&pf_rd_i=mobile