(Part 2) Top products from r/myog

We were tagging three 4000 footers somewhat near Zealand falls... First night we night hiked and climbed Mt. Hale, then we continued night hiking til almost 3 am lol...there was almost a full moon and coming through the section of the AT where it meets the Zeacliff trail was epic at 1am with almost a full moon shining on the talus fields below Whitewall Mountain. We then camped for the night a little past that section after an exhausting bushwack looking for a legal spot off trail. We spent the next night at an overflow spot off of the AT and waited out most of the rain that day. The next day the weather cleared and we climbed Mt. Tom and Field. Was a great trip :D

Ya you should definitely give hammocks a try sometime! A few tips to ensure that you have a chance at good nights sleep in a hammock...make sure that you are using a hammock that is at least 10.5 feet long...11 foot is even better. Anything shorter than that is only really good for lounging in, not sleeping (in my and many other's opinion). You need a proper length hammock to get a good diagonal lay, which is the position that most people find the most comfortable. With a good diagonal lay, you can get your body almost completely flat (as opposed to laying in the hammock like a bananna, which is not comfortable for most folks). You will find that you have a dominant side that you like to position your body which usually corresponds to your dominant hand...so for example, I am left handed and I find it most comfortable to have my feet to the left and my head to the right. A lot of right handed people find that laying the opposite (feet right, head left) is more comfortable for them though. You just have to play around to figure out which position works for you.

Hang angle is also very important in achieving a comfortable position. Your suspension should typically be around 30 degrees to the tree, although I find I like my head end a few more degrees than that. Make lots of micro adjustments to find what is ideal for you. Also, most folks find it more comfortable to have the foot end slightly higher than the head end so that you are not slipping down towards the bottom of the hammock all night. I like to find trees that are spaced about 7 paces between them.

Some sort of bottom insulation is quite necessary to stay warm unless it's around 70 degrees or above. On the ground we lose heat due to conduction, but when hanging we lose heat due to convection. A simple CCF or inflatable pad will do the trick for sure but nothing beats an underquilt for comfort and simplicity...pads work but there is much more "fiddle factor" involved in getting them where you want them, and that process starts over when you get out and back in... but it's totally doable and not that bad... but an underquilt will forever spoil you after using one.

I highly recommend reading Derek Hansen's book The Ultimate Hang before embarking on a journey into the world of hammocks...it's a fun, easy read and will give you all of the essential info that you need.

Regarding the weight issue, while it is true that you will be probably be able to go the absolute lightest with a ground setup using something like a torso length GG CCF pad and minimalist tarp etc., you can go pretty darn light with hammock setups these days using something like a hammock made of the 1 ounce per yard fabrics like Hexon 1.0 with a partial bug net (a Dutchware Half-wit or an add on net like the HUG available at Arrowhead Equipment) , Dutch's new Dyneema 2.0 straps, whoopie slings and an 11 ounce partial length underquilt like a Hammock Gear Phoenix 40 degree. That is essentially my setup at the moment (with a few different tarps that I swap out depending on weather conditions). I've been rocking my whole setup in a GG Kumo with no hip belt and am usually right under a 10 pound baseweight for warm weather loadouts. The slight weight penalty that my hammock setup incurs over ground setup has been totally worth it to me because it has translated into a very consistent sleep experience and has really opened up so many new camping locations. I find that a hammock setup under a tarp is so much more enjoyable when having to ride out a storm as well...the hammock can be used a super comfortable seat to do all sorts of camp chores from. If you take one side of the hammock and fold it over on itself it makes super comfortable seat (you do this to avoid the feeling of the hammock pressing into behind your knee when sitting in it normally). Poor drainage is not as much of a concern as well in a hammock setup which is another huge plus.

My last tip would be expect that your first few trips using a hammock are going to be learning experiences and you may not get it right the first few times. It can take a few trips to get your setup dialed in, but once you do, it's amazing! I'd be happy to answer any questions that you have and I am sure that many of the other hammock users around here would as well. Happy hanging :D

About 10 years back I came across recommendations for an oddly-named book. It was a great read.

I never did start a business but if I had, I would have jumped from the sole do-everything person to a designer/manager/facilitator as soon as I could. One huge problem with a small business is success, which kills a lot of operations. How many 20-hour days can you work? What happens when you need to work 30-hour days and 9-day weeks to keep up?

From the PDF summary (below)...

> The E-Myth, or Entrepreneurial Myth, says that most new businesses are not started by entrepreneurs who set out to build a strong business but by technicians who enjoy the hands-on work themselves. Because of that natural bias, most business owners focus on working in their business when really they should be working on their business.

> A business that is built and managed by someone who combines the approach of the technician, the manager and the entrepreneur will have a far greater chance of future success than one guided by someone thinking like a technician alone.

References:

> [Michael Gerber](https://en.wikipedia.org/wiki/Michael_Gerber_(non-fiction_writer) (Wikipedia)

> Michael E. Gerber Companies

> The E Myth: Why Most Businesses Don't Work and What to Do About It (Amazon)

> The E-Myth Revisited: Why Most Small Businesses Don't Work and What to Do About It (Amazon)

> Summary of "E-MythRevised" (PDF)

This episode of the Survival Podcast will tell you more about home distillation than you'd hope to know. In my state Everclear is darn cheap and much more pure than what you can do at home. Then again, we're the DIY types, aren't we.

That said, hands down the easiest way to distill at home is with a counter-top electric still. I suppose you could hypothetically start with a cheap vodka and go from there, but nothing says you couldn't start from scratch with any scrap starch, sugar or corn and make a fuel mash in a 5 gallon bucket. Not economical, but certainly a useful skill.

EDIT: They mention it in the podcast, but I should add it's perfectly legal to make your own fuel at home. You can get a free permit from the treasury department. On the scale you're talking about, however, I don't think it would matter.

I just started sewing just a few years ago in order to start a backpacking gear company. I have a bunch of 'how to sew' books, but only one has been really useful, it has been "Teach Yourself Visually Sewing", http://www.amazon.com/Teach-Yourself-Visually-Debbie-Colgrove/dp/0471749915

I've pretty much picked up everything that I could get my hands on in regard to sewing outdoor gear. Everything was somewhat useful, but the above book helped the most.

Have fun!

The unfortunate reality is that many of the tribes lost the art and history behind the tipi. The best resource we have today is a book by a white man who resided with several tribes and wrote down his knowledge in a book originally published back in 1957.

http://smile.amazon.com/The-Indian-Tipi-History-Construction/dp/0806122366?sa-no-redirect=1

Today pretty much everything you read is taken either directly or indirectly from that book. Fortunately it's a great read and the Laubins took great care in not only detailing how a tipi is made/built/lived in but also why and the cultural heritage behind it.

That is a great starting point.

After that talk attending pow wows can be another resource as methodology varies greatly not only from tribe to tribe but from family to family.

Not sure if this is exactly what you're looking for, but Reflectix is pretty close. I've used it to keep my pot hot and make it easier to hold after cooking, it's decent, but not thermos level insulation.

https://www.amazon.com/Reflectix-BP48010-48-Inch-10-Feet-Insulation/dp/B000BPAULS

If you ever order groceries online (like from Amazon Fresh or Prime Now), you can get this stuff for free from the bags they put your groceries in

Partly hanging in a tidy-ish fashion, and then... boxes. A lot of boxes. Beware of the wife's reaction though.I recently upgraded the 'desk', let's just say she wasn't totally pleased: http://abcpacks.com/galleries/workshop

Regarding the boxes, I have mostly 3 kinds:

- Assortment boxes with different splits, and clear lid like these: https://www.amazon.de/gp/product/B0002YYXUC/

- Small clear plastic boxes (~5L) I can work with while on the desk, in which I drop medium size stuff): https://www.amazon.de/dp/B076S2VVFW/ref=twister_B07LCWBBD7?_encoding=UTF8&psc=1

- Big-a** clear plastic box (~50-60L) for the fabrics: https://www.amazon.de/dp/B076SDFKQ9/ref=twister_B07LCWBBD7?_encoding=UTF8&th=1

Links are just for examples, I found boxes like these for cheap at the hardware store. The lid is important! You definitely want to be able to pile them up.

I think it's a great idea to make your first pack with cheap ($$) stuff, and then spend money on later packs, once you've gained some knowledge, techniques, and preferences on what you like in a pack.

So, to address the other comments, presumably - I say, because I haven't tried it - you could use some fray-stop on your seams to help them hold. Maybe silicon seam sealer?

For the water, you could try and apply water resistance with a Wash in product, a spray, or some people do wash and spray after. If washing, I'd do it before constructing, spray could happen after, but I'm hypothesizing, as I haven't used either.

Probably should still use a trash compactor liner but it would help keeping the water from weighing your pack down.

I had never heard of those. Pretty cool, though not something I'd even consider investing time or money in. A stone found on the trail and a bit of twine will do very nicely.

There are some shower curtain rings that are shaped similarly to that, eg.. Just JB-Weld them shut or something, putting loads on them would probably pop them open as is.

I borrowed Sewing Activewear from my library and I found it pretty useful. It's a bit 80's but it teaches you how to do all the techniques you see on active wear.

I learned my own basics from a Ray Jardine book and just trying it. Everything tends to have instructions and you can always use Google if you aren't sure what to pick.

haha good to know. so, something like this one, or a bigger knife? there are sooo many options from buyolfa.com

Nice, thank you. I'll probably just make the cozy while I iron out the details for everything else. I just need my new cooking pot to arrive in the mail.

I added a Camelbak Hydrolock for a shutoff, but without one, just hang the filter above the bag to stop the flow. That's about the only hassle in the field. I'm not in love with the Hydrolock, I'd like a bit bigger shutoff, but it works for now.

Oh, and a lot of people also add one of these. Slows the filter down a bit but improves taste.

[Edit] Ah, I guess MSR makes this dealie too. Makes me want to go the Dromolite route over the Platy.

You can also try

Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz https://www.amazon.com/dp/B0002UEPVI/ref=cm_sw_r_cp_apa_zxA7BbVD8X59R

I have used this foam on all my backpack straps and frames. Get the thinner 3/8 inch. It is SO light and really durable. It is the lightest with the cushion I could find. It can be a tight squeeze under a conventional presser foot, but I have a Singer, and it works fine even if a little snug.

https://www.amazon.com/gp/product/B00069PFKK/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

I like what you did there, but the katadyn carbon filter is refilable and connects to the mini with the rubber tube that comes with the mini. It costs around $20.
https://www.amazon.com/Katadyn-8013450-Carbon-Cartridge/dp/B0007U0184/ref=sr_1_1?ie=UTF8&qid=1497327341&sr=8-1&keywords=katadyn+carbon+filter

Ripstop has two styles of those, though not an exact match:

https://ripstopbytheroll.com/collections/plastic-zipper-pulls-clips/products/u-insert-puller

https://ripstopbytheroll.com/collections/plastic-zipper-pulls-clips/products/beam-puller (sold out at the moment)

Sometimes Amazon works for bulk purchases:

https://www.amazon.com/Luckycivia-Extension-Replacement-Backpacks-Traveling/dp/B07L71P99J/

https://www.amazon.com/dp/B07XBF2XML/

https://www.amazon.com/Light-weight-camping-equipment-make/dp/B0007EF3TW

A used 4th edition is yours for a mere $647 plus shipping.

Those come with a "hot knife" tip in the kit.

https://www.amazon.com/Weller-D550PK-260-Watt-Professional-Soldering/dp/B00002N7S1

I use these drawers for all my myog stuff, electronics, and other nick nacks.