(Part 2) Top products from r/nexus6

It depends on your preference. I love tempered glass but I went through a lot of screen protectors o find one that worked out well for the nexus 6 (the curved glass creates a problem)

I personally love the Jelly Comb it's been revised and fits on my device perfect. There's no "halo-effect" if you put it on right the first time but because I had to take mine off I did create one when re-applying it.

In terms of cases I bought a few and found that I like one that covers the whole phone and doesn't leave a cut-out for the motorola Logo.

I'm currently rocking a Rinke Max case and I love the way it shows off the nexus logo while still protecting it.

Hope this helps, let me know if you have any questions. :)

I was thinking of ordering the same Ringke slim crystal case for my Nexus 6. I am using the clear case mate one atm, same one google is selling. I like the kickstand but the phone is way to slippery and I need a case with more grip. I am set on buying one of these Ringke slim cases or the Rinke MAX cases. From the reviews of the slim cases I have read and seen on XDA they are still pretty slippery except for the Ringke (SF Black) which is the only one that has a different texture with alot more grip. As others have said in the comments I think the corner slits will gather lint pretty well.
The Ringke (MAX) has more grip and looks to add more protection with it's dual layered design. It also has dust caps and the back it supposed to be more rigid with a rear guard to keep the back from touching any surface. I am hoping that this makes the back more flat when laying on a solid surface.
I am going to be ordering the Ringke MAX gunmetal(In stock Dec 11th) and the slim clear tomorrow. I am probably going for a carbon dbrand skin also.....
I will post pictures with a little review on reddit! when I get my hands on them both.

Note also Rearthusa is still having their Cyber Monday sale,use coupon code UMQKLJ2K for 30% off orders of $20 or more on amazon.com through 12/2/2014 11:59 pst.
Ringke Nexus 6 Cases BF+Cyber Monday Sale

TYLT Vu

Expensive, but solidly built and stylish. Wish the angle was a little but sleeper, but it's still pretty nice to see my phones display at a decent angle.


RAVPower Qi Charger/Portable Batter

Also kind of pricey, but worth it because it's useful and practical.

I am currently using a white Ringke Slim but I don't have that many drops so it's more of a low level drop and prevent scratch /gunk case.
http://www.amazon.com/dp/B00O152TZY/ref=twister_B00R6TJ6C6?_encoding=UTF8&psc=1

If she is dropping it often then she probably needs some kind of "double layered" case, where its like a rubber case inside a plastic / metal frame.
I like this case as a "fuller coverage" case. But it does add thickness.
http://www.amazon.com/Free-Screen-Protector-Nexus-Case/dp/B00OKRJLSQ/ref=sr_1_8?s=wireless&ie=UTF8&qid=1421795120&sr=1-8&keywords=ringke+nexus+6


And for fun these look nice and have good reviews.
http://www.amazon.com/Caseology-Metallic-Non-Slip-Absorbent-Motorola/dp/B00OM9EADS/ref=sr_1_5?s=wireless&ie=UTF8&qid=1421794828&sr=1-5&keywords=nexus+6

That one looks sweet. I've been using the Koomus mount, which is similar, but doesn't have the same portability and multifunctionality as the Airframe. But it's working great for my needs.

If you live down south or closer to the equator in general, air vent mounts are clutch. Keeps your phone nice and cool while you have it hooked up to the quick-charger.

From what I can tell, the Slim armor has a soft TPU case around the entire phone along with a hard plastic backing covering most of it, the Neo Hybrid has the TPU covering, but a hard plastic bumper that doesn't cover the back of the phone. Now the Ultra Hybrid has soft TPU bumpers around the corners and a clear hard plastic back to it. I have an Ultra Hybrid, a Slim Armor, and a Ringke Max (Comparable to the Slim Armor, only it has a textured plastic back and no kickstand. I'll probably roll with the Ultra Hybrid most of the time so that I can show off the spiffy dbrand white carbon fiber back I've got ordered, and swap the Ringke Max or the Slim Armor for when I'm doing something a bit more prone to phone breakage like hiking or whatever. The product pages on Amazon for the Spigen cases have pretty good pictures of how they each break down, but they can definitely be confusing as to what the differences between each case are.

http://www.amazon.com/gp/aw/d/B00K0E6R5S/ref=redir_mdp_mobile/177-1334487-4372344?keywords=qi%20wireless%20charger&qid=1426284569&ref_=sr_1_14&sr=8-14

$10 and works perfectly. I only charge at night when I sleep so can't say how fast it charges but it works great and is super cheap.

Since everyone else is telling you it isn't possible, I'm just gonna recommend an actual wireless charger. TYLT VU. Looks great on my desk and any time my phone isn't in my hand, it's on the charger. Bonus that the stand is tilted and I can see notifications at a glance. Haven't plugged my N6 in once since I got it. I can confirm the black and red colors look great in person.

My Ringke had a tiny protusion, and it nicked my Nexus :(

but I sold my nexus for more than it cost (but less than I paid if you include tax so I didnt really 'profit') when I switched to n4 so its all good at the end I suppose....

I bought http://www.amazon.com/CellBee%C2%AE-GlowSpirit-Transparent-Shockproof-Colorful/dp/B00P1F0ATK/ and it looked pretty nice, but didnt have the chance to use before I sold it

I like the thin TPU cases. Super durable and small. For myself I got the TUDIA

https://www.amazon.com/gp/aw/d/B00OMMLL8C/

I bought the Diztronic for my sister and I like the look and texture a lot better.

https://www.amazon.com/gp/aw/d/B00PYKPX8U/

I've dropped my phones dozens of times and never cracked a screen with one of these. Been using them for years.

I don't have a car one, but I use this charger:
http://www.amazon.com/Wireless-Charger-Spigen%C2%AE-Charging-Premium/dp/B00UGIA0WY/

and this case:
http://www.amazon.com/i-Blason-Cell-Phone-Nexus-Google/dp/B00OGXQ3LC/

The wireless charging works great. Some of the pads I used in the past you have to position just right for it to work. However with this one I am using now, I just set it on there and it works. The phone does get pretty hot, but it charges fine. Keep in mind that it is slower than charging via cable.

You do need to use a 2A charger brick with it though. It needs that extra power.

I use this Arkon windshield/dash mount which seems to be holding up pretty well. I like how it holds the Nexus from the top and bottom since most other mounts may hold it by the side covering the volume rocker and power button. There's a lot of space for the feet to expand to the size of the Nexus and can hold a full size tablet on its side.

http://www.amazon.com/gp/product/B0051R4ECM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Expensive and instructions are in Japanese, but it is the best charger I've used. You can place your phone anywhere on the matt and in any orientation and it will find the "sweet spot" and charge. It is the first truly drop and go wireless charger I've used!

Also charges through my ringke fusion case.

I had the Choe Stadium and even with its 3 coils I still had to fiddle with the phone placement to find the "sweet spot". It also died on me after a week and a half.

Koomus Air Vent

I used this but I flip it upside down (bump faces down) this gives me perfect support for the phone. I attached some thin foam with double sided tape on the bump where it touches the dash. I use this in landscape mode for when I am using navigation.

I bought it to use on my old Galaxy S3, it opens big enough for the N6 with a case on it.

http://www.amazon.com/gp/product/B00P226GYU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Great case so far. I doubt itll protect it from a 10 foot drop or anything but ive already fumbled the phone twice from a foot or 3 up and no scratches on the phone. The texture of the case is exactly like the One plus One case... it feels amazing

I have this. Works very well with this qi charger. The case adds a little bit to the thickness, but the stand is worth it. The plastic part is very slick, which makes it harder to hold, but I cured that with a a few coats of Plasti Dip. Perfect combo.

I got this charger for my Nexus 4, which has a nifty feature that the charger has an internal motor that auto-aligns with the charging element in your phone. Tried it out today and works great with the N6 as well!

I got this mount: http://www.amazon.com/gp/product/B00H89MLLM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

It fits with my supcase on. It's very solid, has a good grip on the phone, and doesn't cover up or push the buttons on the side. I'm really happy with it.

https://www.amazon.com/Turbot-Wireless-Charging-QI-Enabled-Devices-Black/dp/B01EMWJ6Z6/ref=sr_1_14?ie=UTF8&qid=1482345103&sr=8-14&keywords=qi+charger

I bought one like this Turbot model off Amazon earlier this year that works like a charm and doesn't heat up the phone. (The company that made mine was called Archeer, for what that's worth.) Works with the N6 in a wallet case, too.

Tylt Vu 3 has worked great for me. Looks nice, can use the phone while charging, the fact that the charging point for the nexus 6 is off center doesn't matter, and full charge takes about 4 hours.

I love my spigen thin fit http://www.amazon.com/gp/aw/d/B00OH4HLJ8. It adds very little bulk. However I'm starting to get paranoid about its lack of coverage on the top and bottom sides so I ordered this cell bee case yesterday http://www.amazon.com/gp/aw/d/B00P1F0ATK . It has a hard clear back with tpu sides that looks very slim and it has nothing lower than 5 star reviews

Thinner than most other tpu cases, but transparent with button cutouts. Orzly® - FLEXISLIM Case WHITE for Nexus 6 - Super Slim (0.5mm) Case... http://www.amazon.com/dp/B00PE3FFLC/ref=cm_sw_r_udp_awd_ph3Eub1GG1PXS

Motorola support have no idea when they will be ready. They need to undergo more certification for Australia apparently.
Funnily enough the turbo charger is on the play store for Aussies but not available yet.
I bought one from Amazon and a car one from aliexpress.
http://www.amazon.com/dp/B00OVD3FEU/ref=pe_385040_127541850_TE_item

Buy this, better and cheaper https://www.amazon.com/gp/product/B01EMWJ6Z6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

My port isn't physically dead, but it sucks to use, that was the best thing I ever bought for my N6

Wireless Charger, TechMatte Qi-Enabled Charging Pad for Nexus 6, Ne... http://www.amazon.com/dp/B00F1SHFJA/ref=cm_sw_r_udp_awd_ciKJub07GQ3B6

This one works great. I use it on my nightstand.

i-Blason Dual Layer with a kickstand and holster:

https://www.amazon.com/i-BlasonDual-Kickstand-Release-Holster-Motorola/dp/B00OGXQ3LC/ref=sr_1_2?ie=UTF8&qid=1511506419&sr=8-2&keywords=i-blason+nexus+6

This thing has protected so many drops from 3+ feet onto concrete, tarmac and tile, that I just take for granted my Nexus 6 will never break from a fall or even moderate throw.

It is so slippery. liked the look , but had to change it out to something that has a bit more traction. I have now the Bear Motion, in gray. Much better
http://www.amazon.com/gp/product/B00P226GYU/

I usually put a case on my phones, but considering how large this phone is, I'm looking for a light case for it.

http://www.amazon.com/Bear-Motion-For-Nexus-Galaxy/dp/tech-data/B00P226GYU

This case from bear motion looks light, can handle everyday usage it seems (light protection), and it has a texture. This is my case of choice until I can find a better case functionally and aesthetically.

Have been debating purchasing one of these myself via Amazon Prime, they just aren't in stock yet.

The Ringke Max looks nice too:


http://www.amazon.com/Nexus-Case-Protection-Portection-Motorola/dp/B00OKRJJ5Q/ref=sr_1_2?ie=UTF8&qid=1416782896&sr=8-2&keywords=Ringke+nexus+6

Bought this guy off Amazon for $20:

http://www.amazon.com/Tenergy-Universal-Adaptive-Qualcomm%C2%AE-technology/dp/B00OVD3FEU/ref=sr_1_1?ie=UTF8&qid=1416595469&sr=8-1&keywords=quick+charge+2.0

Only had it for 2 days now...but is fantastic. Turbo charges the n6 from 35% to 75% in 20 minutes

$58 on Amazon. Still pretty expensive for a charger.

either will work just fine, in fact you can get any charger that is qualcomm quickcharge 2.0 certified and it will work (and charge fast)

I personally have this one and it works very well http://www.amazon.com/Tenergy-3308454-Universal-Adaptive-Technology/dp/B00OVD3FEU/

CellBee on Amazon! The is my 4th and last case as it works well. Slim, the right amount of grip, and individual buttons for power and volume.

http://www.amazon.com/dp/B00P1F0ATK/ref=cm_sw_r_udp_awd_oEJOub1BDEEVR

I don't know, I don't have it. I do the the Bear Motion case, and it's a grip monster. Also thin. I highly recommend it. And inexpensive!

Bear Motion For Nexus 6 - Ultra Slim Back Cover Case for Galaxy Nexus 6 - Black by Bear Motion http://www.amazon.com/dp/B00P2251S2/ref=cm_sw_r_udp_awd_AIqYub0WFTEJN

Nice. Alternatively for those without many spare hours on their hands:

http://www.amazon.com/gp/aw/d/B0051R4ECM/

FWIW, the Turbot wireless charger from Amazon works well with mine ($18, 3 coil):
https://smile.amazon.com/gp/product/B01EMWJ6Z6/

I'm currently using the Bear Motion Ultra Slim Black and I really like it.
Bear Motion For Nexus 6 - Ultra Slim Back Cover Case for Galaxy Nexus 6 - Black by Bear Motion http://www.amazon.com/dp/B00P2251S2/ref=cm_sw_r_udp_awd_1FFJub0P5SZR1

http://www.amazon.com/TUDIA-Ultra-Bumper-Protective-Google/dp/B00OMMLL8C Slim case, used it for months until I got a matte black dbrand. I used the case the night I dropped it but that is entirely my fault and I think it's a great case

http://smile.amazon.com/dp/B00P226GYU/ref=pe_385040_127541860_TE_dp_1#customerReviews

This is what I just ordered, arriving tomorrow. Has a sandstone like texture (OPO style) and has the dimple for your finger without leaving it exposed.

I just got my case for my (now activated) Nexus 6. i-Blason Basically I was looking for strong protection with a kickstand. After reading a ton of reviews I pulled the trigger. Now that it's in hand I regret nothing. Strong build dual layers. I don't use the third layer belt clip holster, it mainly goes from pocket to desk/nightstand. Not bulky, good grip, feels sturdy.

I use this mount with my Nexus 6 with the same case that you have, and it works well.

For power, I use this fast charger which always keeps me at 100% in the car.

The Itian knock-off works well too:

http://www.amazon.com/dp/B00LFVPRMO/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=2N4JI6WQEB4G2&coliid=I3VEKSMRD0MV8V&psc=1

Here is a link for the amazon reviews. Seems like there are reports of it, but most people are not having any issues. Plenty of people on this sub recommend it.

I'm very tempted to pull the trigger on this but I might wait until the version 1.2 chargers are out.

Orzly Flexi Slim case is an option...looks good, I ordered one, but have not yet recieved it yet to test.

http://www.amazon.com/Orzly%C2%AE-FLEXISLIM-MOTOROLA-SmartPhone-Versions/dp/B00PE3FFLC/ref=sr_1_2?ie=UTF8&qid=1417785111&sr=8-2&keywords=orzly+nexus+6+flexislim

Looks like they have deleted the page :/

It should have been here: http://www.amazon.co.uk/Motorola-Nexus-SIM-Free-Smartphone-Cloud-white/dp/B00OTAQZBK/ref=pd_cp_ce_3

I saw this one from a post yesterday and it looks to be the thinnest.

Bear Motion Ultra Slim for Nexus 6

http://www.amazon.com/gp/product/B00OH4HZFI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Skinomi has a glass screen protector for the Nexus 6. It also has a lifetime warranty.

http://www.amazon.com/gp/aw/d/B00Q3OXJKA/ref=mp_s_a_1_1?qid=1426959324&sr=8-1&keywords=skinomi+nexus+6+glass&pi=AC_SY200_QL40&dpPl=1&dpID=51A%2BZPNJlqL&ref=plSrch

http://www.amazon.co.uk/Motorola-Nexus-SIM-Free-Smartphone-Cloud-white/dp/B00OTAQZBK/ref=pd_cp_ce_3

Just bought this: http://www.amazon.com/gp/product/B00Q3OXJKA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Non-mobile: http://www.amazon.com/dp/B00Q3OXJKA/ref=mp_s_a_1_1?qid=1426959324&sr=8-1&keywords=skinomi+nexus+6+glass&pi=AC_SY200_QL40&dpPl=1&dpID=51A%2BZPNJlqL&ref=plSrch

^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?

TUDIA Ultra Slim LITE
http://www.amazon.com/TUDIA-Ultra-Bumper-Protective-Google/dp/B00OMMLL8C

https://www.amazon.com/Wireless-Charger-TechMatte-Charging-Samsung/dp/B00F1SHFJA

This charger didn't work for ya?

I have this car mount
Mount

and going to be paired with NFC Tags
&
Charger

These are what I chose. They were cheap so I got two different types of qi chargers and cases. The

https://www.amazon.com/gp/product/B00OH4I2IC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00O153MUK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00FS0XVVM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00K0E6R5S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Aokdis Hot Selling Qi Wireless Charger Charge Pad for HTC 8x Lumia920/820 Note2/3 S3/4/5 Nexus 4 5 (black) by aokdis http://www.amazon.com/dp/B00K0E6R5S/ref=cm_sw_r_udp_awd_Pe0Hub07CF7GW

Same as http://www.amazon.com/Itian-Standard-Wireless-Charger-Charging/dp/B00LFVPRMO ?

$44 cheaper than tylt vu: Itian A6

[I got this case for regular use] (http://www.amazon.com/Nexus-Case-Spigen-Armor-Google/dp/B00OH4I2IC/ref=sr_1_4?ie=UTF8&qid=1420214021&sr=8-4&keywords=nexus+6+cases)

[And this case when I go to work (Red)] (http://www.amazon.com/i-Blason-Kickstand-Release-Holster-Motorola/dp/B00OGXQ3LC/ref=sr_1_35?ie=UTF8&qid=1420214050&sr=8-35&keywords=nexus+6+cases)

right, so im looking at this one right here. Its either this one or the moko one since i need to have a belt holster type deal since i sit in really tight desks at school, and being a big guy i am prone to hitting the phone on the underside of the desks when it is in my pocket.

Get these 4 and switch between them as needed.


http://www.amazon.com/SUPCASE-Google-Unicorn-Premium-Motorola/dp/B00OHFGUDU/


http://www.amazon.com/Ringke-Absorption-Scratch-Resistant-Protection/dp/B00O153Q7E/


http://www.amazon.com/gp/product/B00PYKPX8U/


http://www.amazon.com/gp/product/B00OH4HZFI/

I'm using the Ringke Max. It's slim while still providing two layers of protection. It also covers both the headphone jack and usb ports.

http://www.amazon.com/gp/product/B00LFVPRMO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Just found the white on Amazon, no product description like the blue one thou not even an image. And no 64gb for either by the looks of it

Link to white

If ease of placement is critical, can't beat the Panasonic Qi charger.

http://smile.amazon.com/Panasonic-QE-TM101-K-Black-Wireless-Charger/dp/B0051R4ECM/

Main downsides are no trickle charge functionality and some people have had the moving internal mechanism break over time.

I've got an Orzly FlexiSlim in white and it looked good on the MB that I briefly had. It went back and this case will look even better when my proper Unicorn finally arrives.

It's flexible like a TPU case, but is slightly more rigid with a soft-touch feel. It won't be worth a damn in heavy drop situations, but I doubt that many slim cases would be anyhow.

I have the Spigen Air Bumper & a TechMatte Qi Wireless (https://www.amazon.com/gp/product/B00F1SHFJA/ref=od_aui_detailpages00?ie=UTF8&psc=1). This combination works with no issues.

http://www.amazon.com/CellBee%C2%AE-GlowSpirit-Transparent-Shockproof-Colorful/dp/B00P1F0ATK

Look no further -

I have been using this mount. Not the best but cheap and it works. Also holds the device on the top and bottom so does not hit the buttons. Arkon Windshield Dash Smartphone Car Mount for Apple iPhone 6 Plus 6 5 5S 5C Samsung Galaxy Note Edge 4 3 2 S5 S4 Fire Phone by ARKON http://www.amazon.com/dp/B00H89MLLM/ref=cm_sw_r_udp_awd_hP5Jub1F77TA2

I have this one. I personally despise cases so I have nothing to say whether or not it works with a case.

I got this: http://www.amazon.com/gp/product/B00OH4HZFI/

The price of these fuckers has been going up steadily, a day or two before I bought it was 13.99, I got it for 16.99, now it's at 19.99

its two layers and has a kickstand!! :)

I had this same problem, I ended up having to buy a different brand. This is the one that was causing the problem your describing, http://www.amazon.com/gp/product/B00Q3OXJKA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

After I ordered this one I haven't had any problem's since.
http://www.amazon.com/gp/product/B00QN2X718/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Or.... If you want something that you can set it and forget it, then grab the Itian charger for about $24 delivered. No awkward placing of the phone, just set it on the stand and your golden. Comes in various colors to boot.

Itian A6 Three Coils White QI Standard Wireless Charger Charging Mo... http://www.amazon.com/dp/B00LFVPRMO/ref=cm_sw_r_udp_awd_mf0Kub1RYTABB