Top products from r/smallengines
We found 22 product mentions on r/smallengines. We ranked the 28 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Tecumseh 740059B Air Cleaner
Sentiment score: 0
Number of reviews: 1
Original Tecumseh partPlease verify model number prior to ordering to ensure this is the correct part for your engineReplaces part number 740059A, 740059, 740058
2. Carburetor Carb Kit for Kohler Engine SV830 SV740 SV735 SV730 SV725 32 853 12-S
Sentiment score: 0
Number of reviews: 1
Replaces for Kohler Engine Part : 32 853 12-S & 32 853 08-SFits for Toro Model : 59008, 74375, & 74823Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shippingPlease Note: This is High Quality Aftermarket Parts And ...
3. Carburetor For Poulan VS-2 BVM200FE Leaf Blower Zama C1U-W43 Craftsman Weedeater Poulan trimmer Poulan# 545081857
Sentiment score: 1
Number of reviews: 1
High Quality and Fast Ships from USAThis is an Aftermarket Part.Package Included: 1x Carburetor ,2x Gasket ,2x Primer Bulb ,1x Fuel Line with Fuel Filter
4. AstroAI Digital Multimeter with Ohm Volt Amp and Diode Voltage Tester Meter (Dual Fused for Anti-Burn)
Sentiment score: 1
Number of reviews: 1
ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and moreTROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all rangesEASE OF USE: Data hold and large digital display with backlit LCD for vis...
5. Hipa Carburetor Rebuild Kit K20-WYL for WYL Series Carb
Sentiment score: 0
Number of reviews: 1
Replace manufacturer part number: K20-WYLFits WYL series Carburetors ( WYL-1-1 to WYL-318-1)Package includes gaskets, screen, seals, inlet lever, needle, diaphragm and pin ( the 15 kits in the picture)Ryobi 753-04014Checkvalve is not included, watch the picture carefully, make sure the 15 kits can m...
6. Toro 107-4607 Carburetor Parts Kit
Sentiment score: 0
Number of reviews: 1
ToroCarburetor parts kit
7. Everest Parts Supplies New Ignition Coil Compatible with Tecumseh HXL35 HXL840 HSK600 HSK840 HSK845 HSK850 LAV35 OVRM120 OVRM125 OHSK55 OHSK60 OHSK70 OHH45 OHH50 34443A 34443B 34443C 34443D
Sentiment score: 0
Number of reviews: 1
Brand New!Fast Shipping!High Quality!Great Customer Service!Please Verify OEM Part Number Prior To Purchasing 34443A 34443B 34443C 34443D
8. Hopkins 10803 FloTool Transfer Pump
Sentiment score: 1
Number of reviews: 1
Dual purposeUse as a siphon for any liquid, or as an air pump or blowerInnovative and sturdy designGreat for marine, automotive, and farm useIncludes pump body, dipstick tube, air pump nozzle, air pump/blower hose, hose adapters, and blower nozzle
9. Briggs & Stratton 590781 Magneto Armature Replaces 394891, 392329, 394895
Sentiment score: 0
Number of reviews: 1
Briggs & Stratton 590781New OEM Magneto Armature CoilGenuine Briggs & Stratton PartReplaces Old Briggs # 394891, 392329, 394895, 394988
10. Honda 16100-ZF5-025 Carburetor (Be32A C)
Sentiment score: 0
Number of reviews: 1
Honda 16100-ZF5-025 Carburetor (Be32A C)
11. Electronic Transistorized Ignition Module Nova
Sentiment score: 0
Number of reviews: 1
NOT for use in battery ignition applicationsReplaces points and condenser. Single cylinderDoes NOT work with most Stihl trimmers and chain sawsWill not work on Toro snowblowers
12. On The Farm (1898)
Sentiment score: 1
Number of reviews: 1
Used Book in Good Condition
13. Predator 6.5 HP 212cc OHV Horizontal Shaft Gas Engine - NOT Certified for California; Fuel Shut Off and Recoil Start
Sentiment score: 1
Number of reviews: 1
Durable cast iron cylinder withstands wear and abuseUser-friendly controls for easy starting and operationRecoil startFuel shut off for safe transportBall bearing support shaft for long life
14. Rotary 0000 Aftermarket CarburetorReplaces Tecumseh 640350, 640303, 640271
Sentiment score: 0
Number of reviews: 1
For Tecumseh enginesReplaces Tecumseh #640350, 640303, 640271Fits models LV195EA, LV195XA
15. Murray 1733324SM Drive Belt for Snow Throwers
Sentiment score: 0
Number of reviews: 1
Murray 1733324SmDrive BeltGenuine Murray PartCountry Of Origin: United StatesPower Source Type: Manual
16. Briggs & Stratton 399671 Starter Clutch for most Rewind Starter Engines
Sentiment score: 0
Number of reviews: 1
Briggs and Stratton 399671Starter ClutchFor most Rewind Starter engines
17. New Stens Muffler 105-296 Compatible with Cub Cadet Garden Tractors, Kohler K241, K301 and K321 393840-R91, IH-393840-R91, 237550, 237550-S
Sentiment score: 1
Number of reviews: 1
Country Of Origin: United StatesModel Number: 105-296Item Package Dimension: 15.0" L x 15.0" W x 15.0" HItem Package Weight: 15.0 lb
18. Briggs & Stratton 4 Pole Starter Solenoid 5410K
Sentiment score: 0
Number of reviews: 1
4-Terminal starter solenoidFits most 12-Volt startersGenuine Briggs & Stratton partMade in Canada
Just a note, be careful using carb cleaner, or straight 4-stroke gas (with no oil) for this. 2-stroke engines rely on oil mixed into the gas for lubrication. Carb cleaner has no oil, and can wash the oil off the cylinder walls, running the engine with no lubrication.
If you need to try something like this, it's better in some ways to use a small splash/spritz of oil-mixed, 2-stroke gas.
Yes, I'd interpret your test as showing that the engine is not properly getting fuel. You can clean and rebuild the carb. Or you can replace the carb.
Replacing the carb is simpler than disassembling and rebuilding it. It's also more likely to be successful. For ~$15, replacing the carb is probably worth a shot. One example:
https://www.amazon.com/Carburetor-BVM200FE-Craftsman-Weedeater-545081857/dp/B07597HVX8
Yes, ethanol-free gas should help avoid gumming up the carb. But you could still add stabilizer to the gas, as cheap insurance.
Here's a good resource: http://m.wikihow.com/Siphon-Gas. I personally have this device which makes it very easy: https://www.amazon.com/dp/B00D2QL0DU/ref=cm_sw_r_cp_api_J9D.yb7A80KC5. Either way, wear safety goggles in case there's a splash, and dispose of the old gas appropriately.
Get yourself some Kano Kroil from Amazon and spray it down liberally. Wait 24 hours and then try to take the bolt off. I use said spray consistently at work to free up bolts that have rusted solid on 2000° boilers. It is worth every penny.
Kano Aerokroil Penetrating Oil, 10 oz. aerosol (AEROKROIL) https://www.amazon.com/dp/B000F09CEA/ref=cm_sw_r_cp_api_i_rQ.IDb8RWT79K
It probably is, but you should definitely consider the Harbor Freight motors instead, if you're in the USA. The predator 212 is THE standard go kart and mini bike motor if you're on a budget, and Harbor Freight quite often has a bitchin 20% or 25% off coupon you can use to get the price of a Predator down around a hundred bucks. Parts are plentiful and cheap as well.
Here it is at Harbor Freight
Here it is on Amazon
Wow... Shiny! Looks nice!
I know it's probably stock, and you may be inclined to restore the Cub to stock (and that's OK!), but have you ever considered how loud these exhausts are. Does it ever bother or concern you? Just wondering.
This winter I will be restoring a 1960 Panzer. I'm not hell bent on keeping everything stock, but will keep the appearance as such and it'll all look "period correct". I found a new exhaust (used on a prev. build / restoration) and I love how quiet it is, and have had others comment on it as well.
Went back through my history and found it. I had to cut off bracket so I could configure it for my application. I notice this is mentioned as a replacement for Cub, Kubota...
https://www.amazon.com/Stens-105-296-Muffler/dp/B001OKBDOW/ref=pd_cp_86_1?pd_rd_w=yyIUC&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=XZD3E4N3FX49D176YQNR&pd_rd_r=2ba824d0-e26c-4029-8ee0-24dc7399f8a6&pd_rd_wg=5zjh2&pd_rd_i=B001OKBDOW&psc=1&refRID=XZD3E4N3FX49D176YQNR
I ended up configuring this horizontally in front of and under a forward-facing head / cylinder on a vertical shaft, 18hp Briggs. I had to sleeve the inlet and bought 1, 180 deg. mandrel bend to cut up and get this exactly where I wanted it.
Yeah, I've already dropped them an email. I've also dropped a bunch of ebay and amazon sellers emails to get all of the dimensions.
The part looks like a generic part with a label slapped on. If I knew how that part actually works I could buy one slightly different dimensions probably or even buy one bigger and file it down inside.
https://www.ebay.co.uk/itm/262849825399 (Only has 2 measurements)
https://www.ebay.co.uk/itm/272383446646 (Only has 2 measurements)
https://www.ebay.co.uk/itm/123679192970 (Only has 4 measurements)
https://www.ebay.co.uk/itm/293134680197 (Only has 3 measurements)
https://www.ebay.co.uk/itm/112078986950 (Only has 3 measurements)
A fair few products on eBay and Amazon say things like:
> 1.Please allow 1-2mm error due to manual measurement. Please make sure you do not mind before you bid.
I doubt that 1-2mm difference in most of these would cause any issue?
Hope this helps
https://www.amazon.com/Honda-16100-ZF5-025-Carburetor-Be32A-C/dp/B00AJTYSNW/ref=cm_cr_arp_d_product_top?ie=UTF8
Briggs & Stratton 590781 Magneto Armature Replacement 394891, 392329, 394895 https://www.amazon.ca/dp/B00BWTVIAY/ref=cm_sw_r_cp_apa_i_aWajDbDHNHBQY
Something more like this. What you have is just an ignition coil.
I’ll go buy a spark plug for $2.5 today. But if that doesn’t work what’s the part number of the coil thing I need?
NEW TECUMSEH 34443 34443A 34443B 34443C 34443D IGNITION COIL SOLID STATE MODULE https://www.amazon.com/dp/B00LT23OZG/ref=cm_sw_r_cp_api_i_1BD9AbEZY8C17 So is this not it ? Cause you said $60 but this is only $10
Holy crap! thanks man! :D would this belt be the same ? https://www.amazon.ca/Murray-1733324SM-Drive-Belt-Throwers/dp/B0043RTOVW
They're no letters next to the numbers but that kit does look exactly the same, during that time I ended up ordering one I found on Amazon but it looks exactly the same as the one you sent me
https://www.amazon.com/dp/B00V64XVJQ/ref=cm_sw_r_cp_api_eW8WBbSJ9T714
I believe it’s Part number 107-4607 for the kit.
https://www.amazon.com/Toro-Carburetor-Piece-Parts-107-4607/dp/B00TD8FTBK/ref=mp_s_a_1_1?keywords=98-7042&qid=1558477036&s=gateway&sr=8-1
Carburetor Carb Kit for Kohler Engine SV830 SV740 SV735 SV730 SV725 32 853 12-S https://www.amazon.com/dp/B07QFHW6BG/ref=cm_sw_r_cp_apa_i_kyCwDbM8V68CS
> 222698
Also, so i'm looking at the following parts?
https://www.amazon.com/dp/B00004RB14
https://www.amazon.com/dp/B002E3GGE0
Pull flywheel, replace points and condenser or switch to electronic.
https://www.amazon.com/Electronic-Transistorized-Ignition-Module-Nova/dp/B007BI6FW6
Air filter only fits one way.
It's one of these.
https://www.amazon.com/Tecumseh-740059B-Air-Cleaner/dp/B0074BKCH4/ref=sr_1_4?keywords=Tecumseh+740059B+Air+Cleaner&qid=1549693199&s=Garden+%26+Outdoor&sr=1-4-catcorr
https://www.amazon.com/dp/B0012W21R0/ref=cm_sw_r_cp_awdb_BPbazbM2J05GQ