(Part 3) Top products from r/tDCS
We found 11 product mentions on r/tDCS. We ranked the 51 resulting products by number of redditors who mentioned them. Here are the products ranked 41-60. You can also go back to the previous section.
41. uxcell 10 Pcs 2.54mm Pitch 8 Positions 16 Pin Blue DIP Switch 8P
Sentiment score: 0
Number of reviews: 1
Product Name : DIP Switch;Type : DIP;Features : 8 Positions( 2 Row 16 Pin)Pitch : 2.54mm/0.1'';Non-Switching Rating : 100mA DC 50V;Switching Rating : 25mA DC 24VContact resistance : 50mÎ 24VDC/100mA (at initial);100mÎ typical, 24VDC/100mA (after life test) : 100mÎ typical, 24VDC/100mA (after life...
42. Monoprice 102801 24k Gold Plated Speaker Banana Plugs, Closed Screw Type (1 Pair)
Sentiment score: 0
Number of reviews: 1
Can accept bare wire or spades / Can accept 12 to 18 AWG speaker wiresColor coded black/red rings for maintaining proper polaritySecure, positive contact with binding postsCorrosion resistant, 24K gold plated brass plugEach order includes ONE pair (2 plugs total)
43. Duracell Procell 9 Volt Batteries, Pack of 12 (Packaging May Vary)
Sentiment score: 0
Number of reviews: 1
Industrial useDuracell porcelloLong lasting alkaline power cells
44. Velleman DVM810 19 Range 3 1/2 Dmm - Lc
Sentiment score: 0
Number of reviews: 1
automatic polarity indicationvoltage measurements: AC 500V and DC 500V max.current measurements: DC 10A max.resistance measurements: 2Mohmdiode and transistor (hFE) testpackaging: blisterImportant safety information
45. Ocelot Banana Plugs, 24k Gold Plated Connectors, Open Screw Type, 12 Pair, 12 Pair (24 plugs)
Sentiment score: 0
Number of reviews: 1
24k Gold ConnectorsHeavy Duty Steel Outer CasingEasy To InstallDaisy ChainOpen-Screw Banana Plugs
46. Scotch-Brite Sponge Cloth, 3 pack of 2 sponge cloths, which equals 6 sponges(Pack of 6).
Sentiment score: 1
Number of reviews: 1
Wipes like a cloth, absorbs like a spongeA great alternative to paper towels—outlasts 16 rollsWashable and reusable
47. Mediabridge 16AWG 2-Conductor Speaker Wire (100 Feet, Clear) - Spooled Design with Sequential Foot Markings (Part# SW-16X2-100-CL)
Sentiment score: 0
Number of reviews: 1
Connect your speakers to your A/V receiver or amplifier.High-strand count (0.254mm x 26 strands) copper clad aluminum 16 AWG conductors.Pair with banana plugs, spade tips, or bent pin connectors for professional custom installations.Tough, yet flexible clear insulated jacket is market with a stripe ...
48. K-TOR Pocket Socket Hand Crank Generator Portable Power Supply 10 Watts 120 Volts Made in The USA
Sentiment score: -1
Number of reviews: 1
portable, lightweight, easy-to-use, this hand crank generator provides power when you need it mostgenerates electricity for flashlights, mobile phones, radios, cameras, rechargeable lights and other critical devicesa large crank arm and easy-to-grip knob make generating electricity a breezeweighs le...
49. UltraFire 7w 300lm Mini Cree Led Flashlight Torch Adjustable Focus Zoom Light Lamp
Sentiment score: 0
Number of reviews: 1
. ).. (. )
50. uxcell 85C1-A 0-2mA Analog DC Current Panel Meter Ammeter New
Sentiment score: 0
Number of reviews: 1
Product Name: Analog Ammeter; Model: 85L1-A; Measuring Current Range: DC 0-2mAAccuracy: Class 2.5; Meter Face Size(Approx): 6.3 x 5.5 x 1cm / 2.5" x 2.2" x 0.39"(L*W*T)Thread Size: 0.28 x 0.75cm / 0.11" x 0.30"(Dia.*L), 0.28 x 1cm / 0.11" x 0.4"(Dia.*L)Overall Depth: 5.6cm / 2.2"; Material: Plastic,...
51. HOTSYSTEM DC12V 20A Round Rocker Toggle Switch ON-Off Control SPST LED Illuminated 3Pin Triangle Plug for Car Motorcycle Boat Marine Truck Trailer Auto and More (Green,10-Pack)
Sentiment score: 0
Number of reviews: 1
Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF control.LED lamp will be lighted up when the switch is turned on.Fits into a 3/4" hole.And it comes with a keyhole slot to prevent unwanted rotation.Coppery pin is connected to the battery negative pole,the next p...
Update: Sewing Scotch-Brite sponge cloth (http://www.amazon.com/Scotch-Brite-Sponge-Cloth-9055-2-Count/dp/B0043OYFVO) together worked very well along with a runner's cap for F3 and Fp2; the wires wrapped around very well to the back of the unit from under the cap. However, you have to turn the headset upside down for it to be comfortable. For M1, the other site I'm interested in, I will probably have to cut a hole in the runner's cap to string the wire through.
EDIT: This looks like a good running cap choice actually, as it has a hole in the back already so string wires through: http://www.amazon.com/Pearl-Izumi-Thermal-Skull-Black/dp/B0089DP0CS/ref=sr_1_4?s=sporting-goods&ie=UTF8&qid=1376431311&sr=1-4&keywords=Pearl+Izumi+thermal
Your best bet would be to buy cut the electrode end of the fixed cable off. Then you can strip the ends and use a screw or solder banana connectors attached to end to interface with the Amerex sponge electrodes.
I have decided to buy the banana plugs and jacks from amazon can anyone here verify that I am going to buy the correct ones
http://www.amazon.com/gp/product/B003BKW2K2/ref=ox_sc_act_title_1?ie=UTF8&smid=A28128AMZ00PEQ
http://www.amazon.com/gp/product/B002FYAQYO/ref=ox_sc_act_title_3?ie=UTF8&smid=A3S5JX6S4LCKI6
http://www.amazon.com/gp/product/B0044YPN0A/ref=ox_sc_act_title_4?ie=UTF8&smid=A1DCPNQKKEISZB
Also, will this meter be ok to measure the current?
http://www.amazon.com/gp/product/B000EVYGZA/ref=ox_sc_act_title_1?ie=UTF8&smid=ATVPDKIKX0DER
I tried finding the fuse but I was unable, can anyone post a link to where you got yours. Finally, I was wondering if has anyone experimented with HD-TDCS
According to Amazon reviews, they are the same as the copperhead Duracells, just cheaper due to bulk.
12 of them are $15.09 [on Amazon].(http://www.amazon.com/gp/product/B002UGVWA4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)
Something along these lines?
https://www.amazon.ca/Sidiou-Group-300lm-Flashlight-Adjustable/dp/B006E0QAFY
http://www.amazon.com/Amico-85C1--Analog-Current-Ammeter/dp/B006Z950I2/ref=sr_1_1?ie=UTF8&qid=1411613558&sr=8-1&keywords=2ma+meter
The DVM810 is inexpensive and does the trick.
It is about $12 on Amazon
The lower DPST switch is an off-the-shelf power switch with an integrated LED that I will be using for master system power. The row of switches will be a DIP switch initially, to allow you to dial your current in quarter mA increments, although if I could come up with a rotary switch solution I might switch to it.
I have also bought an in-line analog current meter that goes to 3mA that I will use for at least the prototype, but the 'production' one probably won't have it as long as the dip switched CRD's are consistent and reliable.
All credit goes to http://speakwisdom.wordpress.com/2013/04/02/a-very-simple-current-regulated-tdcs-device/ for the idea and the stolen image.
By the way, if anyone is curious, here's my parts list:
Part with Link|# Per assy|cost/ea|cost/assy
:--|:-:|:-:|:-:
10PC New 16A 12V Round Rocker Toggle Switch Green LED SPST For All| 1| $0.69|$0.69
10 Pcs 2.54mm Pitch 8 Positions 16 Pin Blue DIP Switch 8P| 1| $0.54|$0.54
DC 3mA Analog AMP Current Panel Meter Ammeter Gauge 85C1| 1 (optional)| $7.37|$7.37
50PCS J500 Manu:SI/VISHAY Encapsulation:TO-92,Current Regulator Diodes|8|$0.58|$4.64
As you can see from the list, I'm making more than one of these--my whole office heard the Radiolab podcast and as the designated nerd, asked me to Make It So.
Something like this.
http://www.amazon.com/K-TOR-Pocket-Socket-Generator-Portable/dp/B00658Z3UI/ref=sr_1_3?ie=UTF8&qid=1454120122&sr=8-3&keywords=Hand+Crank+Generator+Portable+Power
I don't see a 9 volt battery one, but you could just plug a 9 volt battery recharger into this. (Except I think it could take 4 hours to charge up. Maybe the 30 minute recharger then?)
I bet that would work still.
Crank and supply the current of a 9 volt battery to a tDCS device while doing a tDCS session. No battery at all. Disregarding movement influencing tDCS effectiveness, that would probably work too.