Top products from r/veloster

Thank you! So first off, I LOVE Chemical Guys. I use a lot of their products to keep Val nice and clean. But when it comes down to to the day-to-day wipe down (for bird poop and such) I was getting weird streaks when not wiping the detailer off aggressively. So I was pointed towards Wizards 01220 Wipe Down Matte Finish Detailer - 22 oz. https://www.amazon.com/dp/B00BI29SAM/ref=cm_sw_r_em_awd_6zbOwb654M7M9 this product works pretty dang well considering the price

Good move. You can get a TPMS only unit, similar to this Autel TS408 you can review their models, they all have different features.

I do work on a lot of cars so I have a full tablet MP808K but it uses the same TPMS software. Autel MP808K

You can find them much cheaper FYI, just using Amazon for ease on mobile. I’m mixed about all the special features Autel has but the TPMS works fine.

Ok. I got too excited and dropped what i was doing to take pictures and get models... Don't judge the rust. I have 105K Miles on the old girl and it's held firm. http://imgur.com/a/mSixE

The install was simple, but it did require the "expanding" of two holes underneath the car. I bought the drill bit (this was ALL explained in the hitch i purchased) and expanded the holes. I installed the hitch, which took about 15 minutes, and it's been solid and great ever since. Yes, its right below the exhaust so it will get dirty and a bit rusty since I didn't clean it. But for a 2012 Veloster with 105k on it, i'm happy with the way it turned out and i know nothing about cars/mod's. EDIT: I remember it being a bit cheaper when i bought this, but eh.

Here is the Hitch

Here is the Rack

I'm sure you can find something online.

Cluster-

https://tuscanicustoms.com/interior/1796-jcs-gauge-pods-veloster.html

Boost guage -

https://www.amazon.com/Auto-Meter-4303-Ultra-Lite-Mechanical/dp/B0009RSYBQ/ref=mp_s_a_1_3?adgrpid=58924786547&gclid=Cj0KCQjwhdTqBRDNARIsABsOl99RBdGlwnfG5ii8wMLvyBXwgE7TOagQ5DxuxlY4JvFbKDaOjWosVQAaAtYKEALw_wcB&hvadid=274748743138&hvdev=m&hvlocphy=9032042&hvnetw=g&hvpos=1t2&hvqmt=e&hvrand=14143157670072797968&hvtargid=aud-648278611385%3Akwd-325362798234&hydadcr=25143_9900395&keywords=autometer+boost+gauge&qid=1565920888&s=gateway&sr=8-3


I'm sure you can find a combination you like. 😁👍

ROLA 59726 Removable Mount GTX... https://www.amazon.com/dp/B008HBM0XO?ref=ppx_pop_mob_ap_share
Fits really well and is super sturdy, does create a lot of wind noise. Fairing recommended

Yeah dude heres a link

https://www.amazon.com/Sparco-01612RS-Red-Tow-Strap/dp/B00BG423YA

You could modify the screw plug that hides the tow thread to have like a letter box cut out in it so the strap comes out nicely instead of a huge hole and a piece of rope hanging out of it haha

Like others have said it's very easy. Here's the filter I always use from Amazon for $13.50USD.

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/59726-Removable-Mount-Hyundai-Veloster/dp/B008HBM0XO/ref=sr_1_1

---

^^i'm ^^a ^^friendly bot

For sure.

Here’s a link to the filter


You’ll need a 3in pipe and some clamps for it to go on. The pipe can be found for like $5 usually right by the spectre filters in autozone.



Edit: here’s a link to the step by step that I followed when doing mine

I have a saris bones rack and I read on some forums that the hatch huggers work perfectly.

http://www.amazon.com/Saris-Hatch-Huggers-Trunk-Mount/dp/B000BT6Q6M

Haven't gotten around to getting them though since the weather has been shitty.

Ya I got this one, but also got the hatch hagger straps like:
https://www.amazon.com/Saris-Hatch-Huggers-Trunk-Mount/dp/B000BT6Q6M

I believe it's an OEM part, you can't just get a regular replacement.

Here's an Amazon link. Seems most dealers probably charge around $10, so you might be better off stopping at one near you.

Installed this on my 2012 Veloster NA, as it was the only one available for my vehicle type at the time - as well as certain models were restricted in California.

Injen Technology SP1340P Cold Air Intake

USA Amazon Link

Racks are ROLA 59726, JBars are TMS J-Bars

Front is tied down to a SoCal Tow Hook. Rear tied to the tow-hook area on the rear drivers-side. Slammed it in the trunk for the pic as it was blowing in the wind.

Was this the plast dip you used?
https://www.amazon.com/gp/product/B0006SU3QW/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1

https://www.amazon.com/gp/aw/d/B07JGX9MZQ/ref=ppx_yo_mob_b_track_package_o0_img?ie=UTF8&psc=1

Could be a different one for gen1 though...

Here’s a link to the one I got.

https://www.amazon.com/Cowles-Products-Decorative-Molding-S37525/dp/B004H24QI4

Ended up using 8ga wire, which is overkill by quite a bit. It's a Clarion XC1410. I plan on splicing my sub amp on to that wire when I put it in though. Haven't decided how I'm going to do my subs.

https://www.amazon.com/Genuine-Hyundai-Accessories-2V013-ADU00-Veloster/dp/B008KZKJTE
i have these and they work well,love that they are oem

Have you considered a roof rack?

https://www.amazon.com/59726-Removable-Mount-Hyundai-Veloster/dp/B008HBM0XO/ref=sr_1_1?ie=UTF8&qid=1502331319&sr=8-1&keywords=veloster+roof+rack

I personally run [this](Motul 007250 8100 X-cess 5W-40 Synthetic Gasoline and Diesel Engine Oil - 5 Liter Jug https://www.amazon.com/dp/B004LEYIQ8/ref=cm_sw_r_cp_apa_i_Y9bsDbMKPH5RA). What I ended up on after going through a few forum threads on the main veloster turbo form. I'm at a convention and don't have a ton of time atm, but when I can I'll see if I can find some of those articles and link them to to you.

http://www.amazon.com/Curt-Manufacturing-56153-CURT-T-Connector/dp/B007R3OS9C/ref=au_as_r?_encoding=UTF8&Make=Hyundai%7C3&Model=Veloster%7C21524&Year=2012%7C2012&ie=UTF8&n=15684181&s=automotive&vehicleId=3&vehicleType=automotive

This is the one I bought.

Rola 59726 Roof Rack for Hyundai Veloster https://www.amazon.ca/dp/B008HBM0XO/ref=cm_sw_r_cp_api_-gA5yb8YN9873