(Part 2) Top products from r/wyzecam

SanDisk Ultra 32GB. If it works in your cam and records properly, you shouldn't have an issue.

I had an issue where various Transcend cards of mine wouldn't show up, would record a few minutes, etc.. This card worked fine in the cam, so I kept constant with the models as I scaled out.

Use Xiaomi Dafang Hacks as that repo is updated within the last 3 days, OpenIPC a few months, and that's what it was based on.

Format the card to FAT32. Make sure to do that. NTFS, etc. will not work.

Once formatted, clear the lot, and download the demo.bin.

Direct Download: https://github.com/EliasKotlyar/Xiaomi-Dafang-Hacks/raw/master/hacks/cfw/wyzecam_v2/cfw-1.1.bin

Rename that to 'demo.bin' and have NOTHING ELSE ON THE CARD. FAT32 + demo.bin by itself.

Insert card into camera with demo.bin. Hold setup before giving it USB power. Keep holding it. Plug it back in. Keep holding setup for 10 seconds after so it flashes.

After 2-3 minutes it'll reflash with an older stock firmware that will allow you to do step 2. Wait 3-5 minutes, and power down the camera.

Re-insert the card to the PC / Mac, and copy the full contents of firmware_mod to the SD card after editing /config/wpa_supplicant.conf.dist to include your SSID (wifi name) and PSK (password).

Make sure to rename it also to wpa_supplicant.conf.

After copying, make sure it's not within a folder on the SD card, but populates the root folder.

Re-insert the card, no need to press any buttons, turn on the CAM and you should find the camera on your network and can login to the interface as https://IP

Full Instructions

It's working great, pushing 430-450KB/s at 20-50% CPU and around 48MB used. Turned off audio and motion tracking to give the CPU a break.

Now I love this camera.

thanks ... I thought about that.
but the outlet is on the side and I don't have enough clearance. My light is one of those recessed lights. I need an extension because the wyzecam plug is pretty big.


also considered this but not sure if it'd fit
https://www.amazon.com/Olens-LampChamp-eReaders-Security-PACKAGING/dp/B076B8LJLT/

Amazon. It was fairly inexpensive and they seem to be working out great. I have two cameras; both using these covers and mounts.

Link: Aobelieve Outdoor Metal Wall Mount and Weather-Resistant Silicone Birdhouse Cover for Wyze Cam Pan Camera (Black, 1 Pack) https://www.amazon.com/dp/B07L7S24QB/ref=cm_sw_r_cp_api_i_GG5FDbA3PD6JP

Okay, thanks! I'm brainstorming how to do it for my own carport. I was actually thinking about using one of these on one of the floodlights and hooking it up there....

Nyce Power LampCharger Light Bulb Socket Adapter, Light Socket USB Charging Station, Desk Lamp Adapter with Dual USB Charger Ports - Lamp Socket USB Port Tablet and iPhone Charger Adapter | 60W Max https://smile.amazon.com/dp/B07P9SDHRY/ref=cm_sw_r_cp_apa_i_wqS3CbAYJRN12

I don't have the measurements of the Wyze wall plug but that doesn't look any smaller.

OP could replace the wall outlet with one that has USB ports or I'd suggest getting one like this.

https://www.amazon.com/dp/B06X3Y4BBB/ref=cm_sw_r_cp_awdb_t1_ZfCUAb2YYV184

That's what I found. No idea if it's any good but people seem to like them for 3d printers

https://www.amazon.com/Conwork-2-Pack-Jacket-Adapter-Cellphone/dp/B01G6EBGWO/

Make sure you've got a stable 5v dc source.

The windows don't allow IR lights to go out and get reflected back into the camera lens. You can turn off the cameras night vision mode and put something like this outdoors to light up the area at night.

outdoor ir lights

GE 54276 Polarized Handy Outlet Plug https://www.amazon.com/dp/B002DN6QX2?ref=yo_pop_ma_swf

This is what I'm using. Works flawlessly.
If you want to keep the light as well, you can use this instead:

Leviton 1403 Two Outlet Socket Adapter, Black https://www.amazon.com/dp/B001F71O70/ref=cm_sw_r_cp_apa_i_mHV.AbN3SJYV7

https://www.amazon.com/SEEKONE-Protective-Waterproof-Protection-Adjustable/dp/B07TMZ8PJ6/ref=pd_ybh_a_6?_encoding=UTF8&psc=1&refRID=R3T1NEXYBTFQP9GGFW1W已经

• In the sale, but does not support night vision mode.
  
• It's good during the day, but it needs to work with the lights at night

Sure. This is the one I use, from Amazon:
SanDisk Ultra 128GB microSDXC... https://www.amazon.ca/dp/B073JYC4XM?ref=yo_pop_ma_swf

If you have lights outside, you could use something like this:
https://www.amazon.com/USB-Light-Bulb-LampCharger-Rechargeable/dp/B076B8LJLT/ref=pd_sbs_107_2/141-1795587-3836632?_encoding=UTF8&pd_rd_i=B076B8LJLT&pd_rd_r=1c670983-2e40-11e9-b05b-55823f4364c8&pd_rd_w=baDuv&pd_rd_wg=7sb7M&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=GB7702PZWX2Q6SF33MGW&psc=1&refRID=GB7702PZWX2Q6SF33MGW

For what it's worth, I bought this one (below), and it worked straight out of the box (it was already formatted).

https://www.amazon.com/SanDisk-microSDHC-Standard-Packaging-SDSQUNC-032G-GN6MA/dp/B010Q57T02/ref=sr_1_3?ie=UTF8&qid=1510782235&sr=8-3&keywords=sandisk+micro+sd+card+32gb&dpID=41f2SZSqv6L&preST=_SX300_QL70_&dpSrc=srch

I ordered these; that thing you linked to was huge!

https://www.amazon.com/gp/product/B07DW8G22H

I've just started using these SanDisk High Endurance Cards: https://www.amazon.com/gp/product/B07P14QHB7/

It seemed like high endurance was the key...

I would try some graphite powdered lubricant like this product: https://www.amazon.com/American-grease-stick-graphite-lubricant/dp/B000K7TOLE/ref=mp_s_a_1_3?crid=3LR5ACS70C943&keywords=graphite+lubricant&qid=1557155482&s=gateway&sprefix=graphite&sr=8-3

Maybe something like this

Nyce Power LampCharger Light Bulb Socket Adapter, Light Socket USB Charging Station, USB Charger Ports, Tablet and Phone Charger Adapter | 60W Max (Lamp Charger with 2 USB Ports) https://www.amazon.com/dp/B07P9SDHRY/ref=cm_sw_r_cp_api_i_P0nSDb34GP2TB

I’m in Canada (Amazon.ca) and we seem to pay more for everything. Price is CDN. I seen a few branded under a different names on Amazon.comfor much cheaper. Also you may not need 12 Leds, they have a 6 LED one. I wanted it to reach to the back of my property so i went with 12. If you look at the top left of the second picture, you can see it.

https://www.amazon.ca/AUTENS-Illuminator-Waterproof-Infrared-Surveillance/dp/B07MG7J5LP/ref=sr_1_2_sspa?keywords=ir%2Billuminator&qid=1564582545&s=gateway&sr=8-2-spons&psc=1

Here is one of the re-branded ones on Amazon.com. Specs are identical.

https://www.amazon.com/dp/B01G6EDOO2?aaxitk=LCOAi2jFNmlky-c8RJNHFw&pd_rd_i=B01G6EDOO2&pf_rd_p=9420597b-7dad-4cbd-a28d-7d676ac67378&hsa_cr_id=6568488390001&sb-ci-n=asinImage&sb-ci-v=https%253A%252F%252Fimages-na.ssl-images-amazon.com%252Fimages%252FI%252F61ysufVbGyL.jpg&sb-ci-a=B01G6EDOO2

You can use these... https://www.amazon.com/AUKEY-Socket-Amazon-Google-Assistant/dp/B07CC9S4MS They also are 10% off if you clip the coupon on that page, and just get a different USB power plug that would work better for you.

But, since you said you want USB integrated, this might work better, https://www.amazon.com/dp/B07G78YSQS but I just don't like combo units.

I've been using this in 3 cameras. Seems fine so far

https://smile.amazon.com/Samsung-MicroSD-Adapter-MB-ME32GA-AM/dp/B06XWN9Q99/ref=sr_1_4?s=electronics&ie=UTF8&qid=1518633373&sr=1-4&keywords=32gb+sd&dpID=413Ql4-3qQL&preST=_SX300_QL70_&dpSrc=srch

Looks like it’s the JC model but there are tons to suit your needs

also, as an option to not paint, there are several cases available on amazon, here is just one of them:

https://www.amazon.com/Aobelieve-Protective-Security-Mounting-Waterproof/dp/B07L7S24QB/ref=sr_1_2_sspa?ie=UTF8&qid=1549487277&sr=8-2-spons&keywords=wyze+camera+case&psc=1

Change it if it’s not too late. You want this one or one that specifically says “endurance”

SanDisk 32GB High Endurance Video microSDHC Card with Adapter for Dash cam and Home Monitoring Systems - C10, U3, V30, 4K UHD, Micro SD Card - SDSQQNR-032G-GN6IA https://www.amazon.com/dp/B07P14QHB7/ref=cm_sw_r_cp_api_i_-.zLDbACPERRN

It’s probably this one.

iSmartAlarm Premier Home Security Package | Wireless DIY No Fee IFTTT & Alexa Compatible iOS & Android App with HD camera included | iSA9, White https://www.amazon.com/dp/B06W2J2YSC/

Five bucks!

https://www.amazon.com/Leviton-1403-Outlet-Socket-Adapter/dp/B001F71O70/ref=br_lf_m_gmtayufhb75x6de_ttl?_encoding=UTF8&s=hi

Here you go.

EDIT:

I also use one of these to reboot my wifi router once a day in the middle of the night.

did you read the linked thread? someone mentioned using this extender: https://www.amazon.com/dp/B06X3Y4BBB/ref=cm_sw_r_cp_awdb_t1_ZfCUAb2YYV184

Wyze Cam Wall Mount Cover for Wyzecam Ismart Spot, 360 Degrees Protective Adjustable Indoor and Outdoor Wall and Ceiling Mount with Case for Wyze 1080p by, 3 Pack, Black https://www.amazon.com/dp/B07DW8G22H/ref=cm_sw_r_cp_api_i_uQzpDbQM36QVX

I use these. I mount the cams under the eves, and haven’t had an issue. I live in upstate NY. (Nowhere near the city).

For your first link, here's the .COM version.
https://smile.amazon.com/AUTENS-Illuminator-Waterproof-Infrared-Surveillance/dp/B07MG7J5LP/ref=sr_1_3?keywords=AUTENS+IR+Illuminator&qid=1565463822&s=gateway&sr=8-3

$229 US .... $219 Canadian 🤔

https://www.amazon.com/iSmartAlarm-Security-Wireless-Compatible-iSA9/dp/B06W2J2YSC

There is one where the LENS is covered. I have a few of these.

https://www.amazon.com/SEEKONE-Protective-Waterproof-Protection-Adjustable/dp/B07TMZ8PJ6/ref=sxts_sxwds-bia

But one of them on a roof in Manhattan, the USB connector still got wet and would not stay on I have soldered the 5V directly to fix.

Now, that one rocks back and forth a lot. I think the plastic where it pivots is wearing down from the wind/weather.

I'm using one of these in a spot where there OEM adapter would stick out too far. Kinda pricy (compared to the cost of the camera!) but I already had it.

https://smile.amazon.com/Nekmit-Dual-Ultra-Charger-Smart/dp/B01JLXTQ1U?ref_=fsclp_pl_dp_4

Here is one. You can control the USB or plug independently using the app it seems and works with all alexa, google home, ifttt etc.

It will turn it off in a way that nothing will be recorded. It will be only waiting for the on signal again, that's about it. You can various things or various actions at the same time too using shortcuts.

I have all sizes. 32GB, 64GB, 128GB... Just got two 128GB cards for two new cams. I even put a 200GB card in as a pinch once. I've had no issues.

​

​

​

I have these in V2s and a pan:

​

https://www.amazon.com/dp/B06XWN9Q99

​

and these in a couple other V2s:

​

https://www.amazon.com/Silicon-Power-Microsdhc-Class10-SP032GBSTHBU1V20AE/dp/B01LZ8YF7U

​

I had the samsung ones "fail" a few firmwares back, but a reformat and firmware update magically restored them from the dead ;)

In the middle of trying this. I have a V2 camera with a micro USB to barrel DC power plug( https://www.amazon.com/Conwork-2-Pack-Jacket-Adapter-Cellphone/dp/B01G6EBGWO/ ) connected to the existing CCTV power cable. The other end I have a USB 2.0 Male to DC Power Cable (https://www.amazon.com/gp/product/B07P5CSH3P) going from the normal included Wyze USB power/charger to the CCTV power cable.


The camera works fine bypassing the ~30' CCTV power cable that's already ran through the attic. When connected to the CCTV cable it gets power, but the video has issues (tearing, weird colors, etc.) and usually connection problems (I confirmed the Wifi is not the issue at the location as well). I tested the CCTV power cable, and it shows 5.1V at the camera connection point. Not sure what to look for next, maybe will try to splice to micro USB but not sure that will help at this point. Anything else to look for?

Until they nail down what in the firmware causes the random dirt naps, if you are real worried about it get one of these: https://www.amazon.com/Woods-50007WD-24-Hour-Digital-Polarized/dp/B005WQIDHY (They were on a stupid-good sale a week ago so they are currently low on stock, I paid $7.50 for 4 of them). Just set it to reboot once a day and you should be good.