Reddit Reddit reviews 1" Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive 50 Durometer - 4-Pack

We found 7 Reddit comments about 1" Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive 50 Durometer - 4-Pack. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hardware
Furniture Hardware
Furniture Pads
1
SORBOTHANE FEET: We created these adhesive-backed Sorbothane rubber bumpers in order to isolate vibration, attenuate shock, and damp unwanted noise. These vibration isolation and gripper pads can be incredibly helpful, especially in the case of sensitive equipment. These isolators are made of Sorbothane, which has incredibly vibration isolation and resilient non-slip properties.VARIETY OF POSSIBLE APPLICATIONS: These versatile rubber tools can be used as feet, stoppers, spacers, and protectors in many applications. Use them for small appliances like DJ sound mixing boards, phones, keyboards, speakers, desk accessories, printers, laptops, computers, multimedia projectors, media-streaming devices, DVD players, and audio receivers for your TV.ADHESIVE-BACKED SORBOTHANE: We design these rubber feet with a strong 3M 200MP adhesive for convenience and easy application. The Sorbothane material is specially formulated for optimal adaptability. It is designed to reduce the impulse peak of a shock wave over time and has the high hysteresis necessary for impact absorption, protecting your equipment from damage.EASY INSTALLATION: Installation is quick and easy; there is no assembly required! Simply peel the protective backing, position the rubber pad, and press it into place. The unique urethane material won't crack, scratch, scuff, or mar surfaces and will last for years to protect your possessions. The ideal weight load is between 2 – 4 lbs. per foot.ISOLATE IT: In 2006, we set out to isolate the vibration of front-loading washing machines. Many designs later, our first product — “Silent Feet” — was born. Since then, we have started designing mass vibration isolation products and have become your one-stop-shop for all vibration isolation needs. Our products help everyone from DIYers to engineers find solutions to their vibration challenges.
Check price on Amazon

7 Reddit comments about 1" Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive 50 Durometer - 4-Pack:

u/JohnBooty · 2 pointsr/BudgetAudiophile

Here's what I do.

  1. Small wooden box from craft store, roughly 4" cube.
  2. Fill it with sand
  3. Glue it shut
  4. Paint it or stain it. A $5 can of brown or black stain and a rag will suffice.
  5. Sorbothane bumpers between speaker and stand. Note that those bumpers have a weight rating; buy the right ones for your need. For example the ones I linked are rated for 2-4 pounds each, so four of them would support 4-8 pounds.

    I have monitor speakers with strong bass on my desk and you can barely feel any bass being transmitted.
u/YoItsTemulent · 2 pointsr/audioengineering

On the one hand, hey... free subwoofer!

Kidding.

A couple of home remedy fixes combined might tame the resonant frequencies (it's too bad you don't have the Ultimate stands that you can fill with sand - that's quite helpful).

I'd suggest making "trivet sandwich". Start with some 1/2" cork trivets (IKEA has them if you've got one nearby). Cut 2 pairs out to the shape of the base of your monitor. Then put four large sorbothane disks between each pair. Between the cork, the sorbothane and the air-gap, you'll cut down the amount of sympathetic vibration significantly. Perhaps not the most handsome solution, but inexpensive and guaranteed to help way more than MoPads.

EDIT: hasty diagram i made.

u/G33Kinator · 2 pointsr/3Dprinting

I highly recommend these feet for noise and vibration isolation.

u/sharkamino · 2 pointsr/vinyl

Wall Shelf:

u/Umlautica · 1 pointr/audiophile

You can add 1" 50-Duro sorbothane hemispheres to accomplish the same effect for ~$25.

u/norouterospf200 · 1 pointr/audiophile

https://www.amazon.com/Sorbothane-Hemisphere-Non-skid-Adhesive-Durometer/dp/B0042U6ZDU/

be sure to choose the "duro" value (weight range supported per pad) to align with the actual weight of your turntable in conjunction with how many pads are being applied.

u/brianbenewmusic · 1 pointr/audiophile

Auralex MoPAD worked "ok" on top of a desk, but better results can be had with stands, whether it's the smaller ISO Acoustics or Floor Stands.

Another (cheaper) alternative is using Sorbethane to isolate the bottom of your speakers (on TOP of floor stands if you wanna get real crazy). Works much better than MoPAD's in my opinion, but you may need to replace them after a while as they harden up. High density foam does an ok job separating the speakers from the floor or desk, but sorbethane allows speakers to move more freely, as they have more "give" to them. The improved clarity and extension of the lower register when using sorbethane over MoPAD was noticeable. https://www.amazon.com/Sorbothane-Hemisphere-Non-skid-Adhesive-Durometer/dp/B0042U6ZDU/ref=sr_1_7?keywords=Isolate+It+%2F+Sorbothane&qid=1564430703&s=gateway&sr=8-7