Reddit Reddit reviews 4-Pack T10 194 168 2825 Extremely Bright 240Lums Amber/Yellow 5th Generation Non-Polarity LED Light 12V-24V - 18SMD 3014 Car Replacement For Map Dome License Plate Dashboard Side Marker Light

We found 1 Reddit comments about 4-Pack T10 194 168 2825 Extremely Bright 240Lums Amber/Yellow 5th Generation Non-Polarity LED Light 12V-24V - 18SMD 3014 Car Replacement For Map Dome License Plate Dashboard Side Marker Light. Here are the top ones, ranked by their Reddit score.

Automotive
Automotive Marker Light Bulbs
Automotive Lights & Lighting Accessories
Automotive Light Bulbs
4-Pack T10 194 168 2825 Extremely Bright 240Lums Amber/Yellow 5th Generation Non-Polarity LED Light 12V-24V - 18SMD 3014 Car Replacement For Map Dome License Plate Dashboard Side Marker Light
(Set of 4 Bulbs)- 8-SMD 3014 Chipsets Amber / Yellow high brightness chips per bulb,Working Voltage:12V-24V DC,Size: 26MM 1.1"x 11MM 0.43",Luminous Flux: 240Lm/bulb,Color Temperature: Amber / YellowLumens value:240Lums (about 13Lums / 3014 chipset),As a Side Marker Light, it will shine very brightly.Constructed of constant power with 1.7 watts,The bulbs equipped with constant-current driving IC and Fast thermal diffusion ,heat-resistant, no digital and VHF radio signal interferenceThe latest design of LED car lights products for vehicle License Plate Dome Light Light Bulb,Compatible for all Japanes cars, also for American cars lights,Non-Polarity design can be plug and play, do not worry about positive and negative poles lead to LED burn outStandard T10 base interface,,Can usually be used as T10 T15 194 168 158 921 912 W5W 161B 168 168A 168NA 175 192 193 194 194NA 194R 2821 2825,If dashboard information is incorrect or flashes quickly, you may need to install an additional load resistor to solve this problem. Note: This is not a CANbus LightBuy with confidence! We offer "ONE YEAR" warranty on item(s) damaged during delivery or have a confirmed manufacturer defect.Any questions, please contact us promptly
Check price on Amazon

1 Reddit comment about 4-Pack T10 194 168 2825 Extremely Bright 240Lums Amber/Yellow 5th Generation Non-Polarity LED Light 12V-24V - 18SMD 3014 Car Replacement For Map Dome License Plate Dashboard Side Marker Light:

u/Akatm7 · 6 pointsr/mazda3

So it is actually a 3 part ordeal.

The actual fog lights since my car didn't come with them, and the stalk. Then I did some c-shaped drl since I have leds in my high beams and the factory drl doesn't work with leds, but then the c-shaped drl didn't work for a little bit so I bought the drl turn signals, and then the previous c-shaped ones started working again. I will just post all of my mods below:

Fog lamps with brackets : https://www.amazon.com/dp/B01FL8DPWU?ref=ppx_pop_mob_ap_share

Light stalk : https://www.amazon.com/dp/B00AWO7XOK?ref=ppx_pop_mob_ap_share

C-shaped DRL : https://www.amazon.com/dp/B014P7LPEI?ref=ppx_pop_mob_ap_share

Sequential LED Turn signals with DRL : https://s.click.aliexpress.com/e/5veD22k

9005 LED High Beam : https://www.amazon.com/dp/B075J9S4DT?ref=ppx_pop_mob_ap_share

H11 55W HID Low Beam : https://www.amazon.com/dp/B07CMKT2F4?ref=ppx_pop_mob_ap_share

7440 7443 LED Brake/Tail Light : https://www.amazon.com/dp/B07GTKLF32?ref=ppx_pop_mob_ap_share

7440 LED Turn Signal (rear) : https://www.amazon.com/dp/B07Q8RZRZV?ref=ppx_pop_mob_ap_share

194 LED License plate/used as side markers in the front/a couple other places : https://www.amazon.com/dp/B07BT23WVC?ref=ppx_pop_mob_ap_share

194 LED side marker bulbs (not used but the correct ones if you want yellow, I liked the white and it was what I had when the originals burnt out but didn't ever change them from the above link) : https://www.amazon.com/dp/B01KY7GCXW?ref=ppx_pop_mob_ap_share

License plate smoke : https://www.amazon.com/dp/B007LICQ9M?ref=ppx_pop_mob_ap_share

Grille : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254096211721

K&N 33-2480 Air Filter : https://www.amazon.com/dp/B00CR9WVPE/ref=cm_sw_r_cp_api_i_VfS6CbNBD59AQ

I had my rims done by a local company, they are the factory 16" painted gloss black. My mazda emblem is actually a long story, but essentially it is just scuffed up with sand paper ready to be painted but I liked the look and stuck it back on the way it is. I have also installed car play, and 3D printed a shift knob. The factory bose system was a little lacking and put a small under seat sub in to help fill the sound, but am still not happy with it, so that's a future project.

Some near future plans for the car include the aero kit, and I'll post the links to those here too:

Front Bumper Lip Air Dam : https://www.amazon.com/dp/B01FTUE8EY/ref=cm_sw_r_cp_api_i_bdS6Cb2X8Y22M

Black Mirror caps : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283050942561

Side skirts : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F391544070112

And the rear diffuser : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113007041503