Reddit reviews AUTOSCRUB Fine Grade Sponge [AS-019]
We found 35 Reddit comments about AUTOSCRUB Fine Grade Sponge [AS-019]. Here are the top ones, ranked by their Reddit score.
Lasts up to 10 times longer than clay barsFor a flawless “show room perfect” shineGlides on & off easily for a slick finishIf inadvertently dropped on shop floor, simply rinse clean
Definitely check out /r/AutoDetailing where I learned my method.
The way I do it:
Equipment:
Washing:
Rinseless washing is great when your car is mildly to semi-dirty. This means if it's mostly just dust on your car this is great. Otherwise if it's caked with mud this won't work. You'll have to go somewhere to hose your car off with water first so it's not as dirty.
Clay Bar/Nanoskin:
Note: This is only necessary if there are actually micro-contaminants. I would do it on a new car regardless since it has been sitting on a lot. On a normal basis you only need to do when your car doesn't feel glass smooth after a wash. Usually no more than 1-2 times a year.
Sealant/wax:
After you're done with claying your paint is clean so you'll want to put wax/sealant on it to protect it. It'll make your car nice and shiny too.
Start with an isopropyl alcohol wipe. What I do is dunk a towel in the alcohol solution and wipe down every panel and drying after it. You can also just fill another spray bottle with it and spray. This will get rid of oil/wax/sealant so the sealant goes directly on the paint. Then just apply the sealant/wax on following the instructions. With opti-seal you just spray and wipe. With some other items you'll need to apply and wait to cure and buff out any remaining wax/sealant.
For wheels and tires I suggest you just check out the wiki on autodetailing. I just simply wipe off the tires with ONR but ONR isn't the best at getting oil. I'm too lazy though to worry about it too much as long as the wheels look clean it's fine with me.
I'm lazy and do a rinseless wash 1-2 times (usually 1) a month. Some do it weekly. I put sealant on every 3-4 months or so. I've only clayed my current car once so far.
2014 VW GTI
I performed my Express Detail on this 2014 VW GTI for a client in MIAMI! It just so happens I used to live in Miami and have family that I see every once in a while. This client messaged me asking if I ever go down there, and it just so happens that I was. This is so far the farthest I have traveled for a detail. He also gave me a pop up tent which was great because it was way too hot.
Products Used:
Wash
Wheels
Decontamination
Clay
1-Step
Interior
Exhaust Tips
Notes
I ended up buying an Easy Up tent. These things are awesome.
Price: $215 + TIP
Time: 5+ Hours
Thank you for your business fellow redditor :)
I'm reposting some suggestions I made from a previous similar thread, hope it works out for you (the last person's budget was $100; not sure what yours is, but you can pick and choose!)
 
Optimum No Rinse: Concentrated and capable of being diluted as a wash, quick detailer, clay lubricant, window cleaner, light interior cleaner, and more.
Optimum Opti-Seal: Incredibly easy to use sealant (wipe on and walk away!), can be used in place of RainX on windows, good drying aid, and useful as an interior dressing as well. Opti-seal ALL the things!
Detailing brushes: Because every detailer can use more brushes!
Nanoskin Autoscrub Sponge: Makes the process of decontaminating your paint much faster. Much longer life than clay and can be used even after dropped on the ground! Use the ONR as lubricant and you save tons of money.
The Rag Company Eagle Edgeless Towels, 4 pack: These will be the best towels he's ever used.
The total for all of this should be $97.96, just under your budget :)
 
A couple other suggestions if you want to mix and match:
Smaller Opti-Seal: Since it's the biggest budget item here and a little goes a long way, you can go with the small one to include more items in your bundle.
Adam's Wheel Cleaner: The least terrible smelling wheel cleaner, but extremely effective as well. Good if that truck throws a lot of brake dust.
CarPro PERL: For protecting exterior plastics as well as dressing them, and for use as a satin look tire dresing.
Wheel Woolies: Makes cleaning wheels a much nicer experience, and won't fling brake dust into your face like the brushes do.
Hope this helps! If you want any more specific recommendations for any category, feel free to ask! As for things to avoid, Armorall, Turtlewax and Chemical Guys in my opinion.
Wash: https://smile.amazon.com/Meguiars-Hyper-Wash-Foaming-Leaves-D11001/dp/B0006SH4IM
Clay: https://smile.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G
Decontamination: https://www.autogeek.net/carpro-iron-x-cleaner.html
DA: https://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-69924.html
Polish: https://smile.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B003LMGDHI
Compound: https://smile.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B003LMGDHI
Pads: https://smile.amazon.com/dp/B004104678/ref=twister_B00NN89SGI?_encoding=UTF8&psc=1
Coating and Sealant: https://www.autogeek.net/cquartz-uk-edition.html
i use Amazon.com: Nanoskin (AS-019) AutoScrub Fine Grade Sponge and as lube some shampoo diluted in water. does an amazing job and quite quick!
How To: Decontaminate your paint & wheels
Note: When using a clay bar and/or sponge, you will feel the contaminants being picked up. When running over the paint or wheels, you’ll feel little bumps. Keep the clay/sponge motion going and the bumps should go away. It’ll start to feel smooth. To be 100% sure you’ve gotten everything up, place your hand in a plastic sandwich baggy and run your hand over the paint. Because of the ‘finer’ surface area of the bag, you’ll feel what you missed. https://www.youtube.com/watch?v=Ml434m7ILNA Here is a video of Mike Phillips explaining it.
Congrats! Your car should be contaminant free and ready to be polished!
Dodo Juice Ferrous Dueller
The Mother's & Meguiar's Clay Bar Kits can be found over the counter for about $15-20.
NanoSkin Fine Grade Sponge
Optimum No Rinse
CG Citrus Wash & Gloss
Nanoskin Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G/ref=cm_sw_r_awd_6.eWub0G5AWXB Sorry for long link on mobile. I only use these now. I do think you need to use more lube with these then normal clay but it last longer. If you drop it just rinse it thoroughly and ready to go again.
Great, thank you!
Sorry if I'm being stupid, but do I apply the sealant with a microfiber towel or with this?
If not, what is that sponge used for?
I love Larry's videos from AMMO NYC & DRIVE Clean and have always followed his recommendations for detailing/washing.
My parents' neighbor has been watching as I borrow Mom and Dad's hose and he recently asked if I could take on his car and I was happy to oblige! Overall, the exterior was in okay shape - couple bugs, a few spots of tree sap and bird poo, as well as just a good amount of dirt and mud tucked in some spaces. I gave the car a two bucket wash,
clay, Iron X treatment,Iron X, clay and topped it off with a sealant. Thanks for pointing out that I listed my procedure out of order, /u/Deadfable! Here's the deets:Products Used:
0000 Steel Wool from Home Depot (used with QD for the exhaust tips)
Overall a fun job! Got rewarded with a hearty lunch of sausage and peppers on Italian bread. Happy detailer!!
https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=sr_1_1?ie=UTF8&qid=1503197119&sr=8-1&keywords=nanoskin
That's what I use. Works great.
I agree with everyone that it's rail dust, or just iron particulates that get embedded in to your clear coat. initial removal will take care of most of it, but know that with a white vehicle, it'll show up occasionally, even with waxing.
Instead of plain clay bar, I'd recommend getting a nano-skin. works like clay bar, but much easier to use (you can drop it and simply rinse it off). I just use any quick detail spray as a lube.
nanoskin
Get a Megs105 or Ultimate Polish (since its a beater I expect the paint is in need of compounding) $10
If you don't want to compound maybe a wax cleaner, its milder, cheaper and you could probably 1-step your car with it but don't put your expectations high because it only removes mild oxidation and some swirls. $7
If you need a backing plate, go get a 5 inch one $10, you need it
Get an CCS Orange Pad from lake (8-10)
Meguires Gold Class Wax on Target/walmart/amazon $10
I almost forgot but you need to clay before you start the magic and the cheapest one and most awarding one I know is this that's like $11.
Invest a few more dollars and if you want your money back you could always clean your friends car for a few bucks.
Same here. I have a clay sponge that I use occasionally but, I clay twice a year with the real bar.
One day, I will have the balls to get a polisher. Until then, I just clay and wax.
Don't use just water.
You can pickup blue ONR https://www.amazon.com/Optimum-NR2010Q-Rinse-Wash-Shine/dp/B00D8DR0AO/ref=sr_1_1?ie=UTF8&qid=1510851008&sr=8-1&keywords=optimum+no+rinse which you can use as clay lube, detailer, rinseless wash depending on the dilution with your distilled water.
Clay lube: ratio 1:64 or 2 oz/1 gallon
Those types of clay do the job and some people perfer it to traditional clay. I haven't heard of that brand, but i'm sure its the same stuff. I personally have little sponge from Nanoskin. https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=sr_1_3?ie=UTF8&qid=1510851254&sr=8-3&keywords=nanoskin
I like this better than that "towel" since this has a nice grip.
Unless you specially needclay, go with Nanoskin (AS-019) AutoScrub Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G/ref=cm_sw_r_cp_api_i_SEotDbSTMY8MQ
Most of the clay out there is very similar, but there are different grades of clay (read: aggressiveness). Nanoskin is great for the "average Joe" who has a reasonably clean car but needs to decontaminate it, and clay is great for a 100% decontamination job like a very dirty or neglected car.
If you're new to claying... I'd suggest getting this kit, or something similar. It has everything you need as a beginner. I used these all the time when I first started detailing. I finally needed more so I bought in bulk and gallons of lube at a time.
The second thing I'd recommend is getting a small, fine nanoskin sponge. You can try it without dropping $45 for a mitt or pad and see if you like it and the results you get when working with it.
Non-mobile link
wax for the interior? I was thinking of the 3m style spray on plastic stuff that I assumed was used on the seats and other surfaces to prevent dust buildup.
The brush is the Nanoskin (AS-019) AutoScrub Fine Grade Sponge http://amzn.com/B00CUAWJ6G
obviously should have called it a sponge!
So my first ever detail is planned out like is this
My understanding is polish basically scrapes a layer off in order to go deep, is there anything i need to "refill" that digging?
Does my order of detailing sound good, in other words do i need to add anything else?
Did you not decontaminate the paint with clay or alternative??!
Oh boy. Your paint is supposed to feel VERY smooth after a wash, clay, and wax. Here's a review of a nanoskin sponge which is 100% worth it I wrote. My car feels so smooth it's ridiculous.
http://www.amazon.com/gp/aw/d/B00CUAWJ6G/
http://www.reddit.com/r/AutoDetailing/comments/2bjc99/the_best_10_ive_spent_detailing_nanoskin/
Not decontaminating your paint also results in you rubbing abrasive particles into your clear coat and swirling it.
Here's my advice-
I believe clay bar qualities are different. Just like with most stuff, generally the higher the quality, the more expensive it is. The cheaper ones I've worked with have streaked heavily and more often. Depending on the vehicles condition, and how often you detail, a clay bar can last a long time. This CLAYBAR is pretty cheap & plenty of people like it. For a clay sponge it does the job.
Hello!
So I've been lurking here for several weeks trying to soak up what I can. I've checked out the wiki page on starter kits and I guess I'm just wondering a couple things based on the list to get myself going.
Gonna get the buckets and the grit guards. I've got a ton of microfibers I use for my car already.
I was thinking of getting the Griot's DA polisher recommended (here)[https://www.amazon.com/Griots-Garage-10813STDCRD-Orbital-Polisher/dp/B009UKUUWE/ref=as_li_ss_tl?s=automotive&ie=UTF8&qid=1462198536&sr=1-1&keywords=griots+da+polisher&linkCode=ll1&linkId=3a68733089f6c8d0f136c31b5c3bb8d1]
I guess I'm wondering what chemicals I should be using on my vehicle?
I do live in an apartment complex though so I DO NOT have access to a hose because our landlord has got it under lock and key. I read a few days ago about a product that someone used outside and it was still ok (though I do have access to a garage!).
I guess I'm just more lost as to where to start besides the DA polisher.
edit: Oh! I've used a clay bar before and while it was nice, I was wondering about this nanoskin sponge that's also recommended.
https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=as_li_ss_tl?s=automotive&ie=UTF8&qid=1462198361&sr=1-1&keywords=nanoskin&linkCode=ll1&linkId=4c532041fcdbfa6b35f768083c70423e
Is that like a 1:1 sub for clay bars? Same thing just not wasted if dropped?
When using a clay bar alternative like this, do you apply it the same as you would a clay bar? Wet the surface with an auto detailing spray, then gently pass back and forth with the bar until it slides smoothly?
It is an 05. Paint is in decent condition but a lot of contamination. It was sitting under a sap tree for 2 years. I spent about an hour claying the hood and it removed maybe 70% but there was a lot of stuff. I was using chemical guys clay.
Thank you..glad you said something :)
Like this
Yes you can use that one, I actually have this one. I bought a two pack in case something happens with one so I'll have one on hand.
The interior was easy. Vacuum, wiped down with Nextzett Cockpit Premium, and dressed some parts with 303. The only bad thing was I was vacuuming in the sun, so it was hot af. The paint had oxidation, but the owner didn't have much time so I only washed it and sealed it with Sonax Polymer Net Shield.
I personally have only used the Nanoskin sponge to decontaminate my car. It's a highly recommended clay alternative.
As for a sealant/wax, I'm not sure if my recommendations will be of any use since I just started detailing my own car over the last ~6 months. I have only tried one wax (Meguiar's Ultimate Liquid Wax) and one sealant (Opti-Seal). Longevity of the Ultimate Liquid Wax wasn't great IMO. I'd look into Collinite 845 since it's highly regarded and there are plenty of tips/tricks on how to use it.
Honestly, easiest solution may be go to with CarPro Essence or HD Speed. I don't think there are any special tips/tricks on how to use Essence or HD Speed, and both will allow you to polish and seal your paint in one step. Admittedly, I haven't looked into either much, but they are next in line for me to research.
I’ve heard bad things about the clay mitts. Supposedly they fall apart instantly. Try this guy : Nanoskin (AS-019) AutoScrub Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G. I spray the car heavily with ONR (two cap fulls into a 32 ounce spray bottle, fill the rest with water). Then I brush every section both horizontally an MF vertically with this sponge. If you drop the sponge just dip it in a bucket of water to get everything off. Smooth as glass afterwards. Top it off with some Collinite 845 and your whip will be looking tippy top!!
Just get something from a reputable brand. Meguiar's is good and readily available. Another option you have is using a Nanoskin sponge, which does the same thing as clay, but can be re-used and can be rinsed off if you drop it on the ground, where with clay, if you drop it that piece of clay is done.
Can you feel anything when you move your fingers over it? It may be worth asking r/AutoDetailing. Another option is to use a nanoskin which works like a clay bar.
How sticky/tacky should my nanoskin sponge be? After doing the recommended break-in, I never got the white or foam/bubbles they described and it is definitely not tacky. At the edges of the rubber, it sticks a little, but the overall face of it never changed.
Sounds like you need a clay bar. Or my favorite, a Nanoskin sponge.
id drop the creme glaze and get a wax instead (if budget is a problem?). meguiars gold class wax is a cheap but very effective wax.
youll need about 3 cutting pads, 3 polishing pads, and 2 wax/sealant pads.
32 oz of compound and polish is a lot. if budget is a problem, you can do a lot of cars with the 8 oz bottles.
you might want to consider getting just the nanoskin sponge instead of the mitt and a regular microfiber wash mitt. it will be cheaper and you dont need to clay every wash.
ONR is good, but since you can use soapy water as a lube with the nanoskin, you might want to just get a good quick detailer instead. it helps with drying the car too.
Hello,
I've read the wiki and its a huge resource. Thank you to all who put it together!
Some of the product reccommedations are unavailble on Amazon so I just wanted to ask a few questions with regards a brand new car I bought and see if these products are whats needed:
So firstly, washing the exterior of the car:
I have Meguiars Gold class wash, I have two buckets, and grit guards, I will do the two buckets method. Now do I dry the car with:
this: https://www.amazon.com/gp/product/B01ERU0F3A/ref=ox_sc_act_title_5?smid=A1RKELVBY446LD&psc=1 or
this: https://www.amazon.com/gp/product/B00GXRFLY4/ref=ox_sc_act_title_3?smid=A1RKELVBY446LD&psc=1
Once I have washed the outside and dried it with the towels, I then apply the wax, I will be using #845 - can I use these to apply it:
https://www.amazon.com/Viking-Car-Care-Microfiber-Applicator/dp/B0051MYL8E/ref=pd_bxgy_263_2?_encoding=UTF8&pd_rd_i=B0051MYL8E&pd_rd_r=BG4S92NE1D9CH9E2J67C&pd_rd_w=HVEIG&pd_rd_wg=6EheM&psc=1&refRID=BG4S92NE1D9CH9E2J67C
I know I needs to get a clay bar or a micro sponge I'm just not sure where/how this fits into the process, what items do I need to buy
These?
https://www.amazon.com/Mothers-07240-California-Gold-System/dp/B0002U2V1Y/ref=pd_bxgy_263_3?_encoding=UTF8&pd_rd_i=B0002U2V1Y&pd_rd_r=BG4S92NE1D9CH9E2J67C&pd_rd_w=HVEIG&pd_rd_wg=6EheM&psc=1&refRID=BG4S92NE1D9CH9E2J67C
https://www.amazon.com/gp/product/B00CUAWJ6G/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
Lastly, I am buying this window cleaner -
https://www.amazon.com/gp/product/B0006SH4KU/ref=ox_sc_act_title_8?smid=ATVPDKIKX0DER&psc=1
Is it safe to use inside and out? I would imagine spray directly on outside windows and just use some microfiber towels like this - https://www.amazon.com/gp/product/B00WC5KQGE/ref=ox_sc_act_title_4?smid=A1RKELVBY446LD&psc=1 to clean it off? On the inside I would imagine spraying directly onto the cloth would be better.
Do I clean the outside windows after the car has been cleaned and waxed?
I understand the basic process and with this being a new car I want to be 100% I'm doing the right thing, I fully intend on washing it every other week and taking great care of it!
Thanks
Tim
I was actually looking into getting the Nanoskin version of this and I am so scared of it instilling swirls into my paint. Somebody please help me make a decision, I need some pros / cons.