Reddit reviews Blumat Classic (Jr.) Automatic Plant Watering Stakes (3 Pack)
We found 5 Reddit comments about Blumat Classic (Jr.) Automatic Plant Watering Stakes (3 Pack). Here are the top ones, ranked by their Reddit score.
15 MINUTE SETUP - Just take the cap off and fill your Blumat with water, let it soak in a bowl for 15 minutes, replace the cap and fill your wine bottle full of water. Take your stake and the wine bottle to your favorite plant, insert the stake, and put the tube in the wine bottle. 3mm diameter silicone tube reaches about 38 inches.It's that easy!NO OVER OR UNDERWATERING - The Blumat Classic delivers water gradually into the soil of your plant through the cone and draws water from your wine bottle. As the soil gets wet the Blumat automatically starts delivering less water. For a plant requiring more water place the wine bottle on a higher surface and vice versa.MADE IN AUSTRIA - We use the highest grade of ceramic materials and engineering available which means Blumats last longer than knock-offs and keep your plants healthier. We've tested other products and nothing waters like a Blumat.MAKES THE PERFECT GIFT - Give anyone a Blumat Classic and watch them sprout a green thumb. They're easy to install, easy to manage, and take the guesswork out of watering.
I haven't had good luck with cheap electronics from Amazon. the beauty of the blumat carrots is that they have no electronics or moving parts (they will break if you drop them but that's about it). I've used the old school blumats for houseplants for years. I use 2+ carrots for bigger pots.
edit: by "old school bluest carrots" I mean these little dudes: https://www.amazon.com/Blumat-Classic-Automatic-Watering-Stakes/dp/B0001IOZ98/ . I've never used the newer/fancier ones
https://www.amazon.com/Blumat-Classic-Automatic-Watering-Stakes/dp/B0001IOZ98
There are a couple good YouTube videos you can search to get started.
Boil some water and let it cool completely- this will remove the dissolved oxygen bubbles. Soak the blumats in the water for an hour+.
I will suck a little bit of distilled water through the little plastic hose to get it primed. Then you assemble the two pieces together underwater (to avoid air bubbles), push the blumat into moist soil and drop the plastic line in a bottle and you're done.
As long as the bottle doesn't go dry your soil will be kept at the optimal level. They say you can use water soluble nutrients with it, but I just use a watering can whenever I want to feed her and it doesn't interfere with the blumat system.
If you forget to add water to the bottle you can just repeat the process and you'll be good to go again
I have four Calatheas staked and honestly 3/4 are doing better than when I was watering normally by hand. The fourth one is doing just as well as before. I use these Blumat watering stakes and would highly recommend them.
Consider something like this:
https://www.amazon.com/Blumat-Classic-Automatic-Watering-Stakes/dp/B0001IOZ98
Combined with monitoring water level of the reservoir. You can use multiple stakes for larger plants / pots.
Covers the accidental flood risk, and gives you more portability at the cost of having to fill reservoirs occasionally.
I'm using this to watering my plants : https://www.amazon.co.uk/BLUMAT-Carrot-Sensors-Automatic-Watering/dp/B0001IOZ98
I usually watering them manually, but only when the carrots watering system is stuck or when is empty
I ll check that then, i'm ok with the english except for talking it, as toi could see i think