Reddit Reddit reviews Bosch Telescoping Pole with 1/4-Inch by 20-Inch Laser Mount BP350

We found 2 Reddit comments about Bosch Telescoping Pole with 1/4-Inch by 20-Inch Laser Mount BP350. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Measuring & Layout
Laser Levels
Bosch Telescoping Pole with 1/4-Inch by 20-Inch Laser Mount BP350
COMPLETE: The Bosch BP350 is the complete laser tool positioning system, including pole, clamp and tool mount.SWIVELING: Featuring a swiveling threaded mount (1/4-20) for attachment of line laser or point layout laserADJUSTABLE: With a quick-set clamp the Bosch BP350 laser mount offers easy placement at virtually any height between floor and ceiling, making it the perfect telescoping pole for using your laser tools at any jobsite.COMPATIBLE: The Bosch BP350 accepts optional Bosch WM1 Universal Mount and its microfine height adjustment system has an adjustable pole range of 4.6 - 11.5-Feet.EASY SET-UP: Featuring fast set-up, the rotation of pole sections sets positions with ease. Also features Anti-Slip Surface on-Feet and Ball-Jointed Head Plate for secure placement at floor and ceiling.
Check price on Amazon

2 Reddit comments about Bosch Telescoping Pole with 1/4-Inch by 20-Inch Laser Mount BP350:

u/M80IW · 2 pointsr/Tools

I have worked with a lot of brands of lasers and have never used any that work in the manner you are looking for. What you want is a pole mount for lasers. Something like these:
http://www.amazon.com/Bosch-BP350-Telescoping-4-Inch-20-Inch/dp/B001U89QH4/
http://www.engineersupply.com/CST-berger-12-foot-laser-pole-58-lp12-um.aspx

Buy a mounting pole that works for you and you should be able to use almost any line laser on it.

u/sgtcarrot · 1 pointr/Vive

Here is what I found, use it at your own risk:

  • I have two ways to setup: permanent wall mountings in my VR room, and a kit with lightstands and other mounting options for when I am out doing demos (I do lots).

  • For mounting to the wall, I found that I did not need a stud. Use sheetrock screws, it is more than enough support.

  • I also found that the screws and molly provided by HTC are crap. To this day I cannot figure out how you use a solid molly. I used my own screws and was better off for it.

  • I put them at about 7 feet high, diagonally opposed (around 4 meters apart). But know that you do not need to measure or make anything precise with the location. They are very flexible, have a very wide FOV, and I have set up lighthouses on lightstands dozens of times, each time with wildly different locations: works perfectly every time.

  • The big effort is the room: Remove or cover all reflective surfaces, make sure you have powersurge protection (the lighthouses in particular want clean electricity). I have a dedicated room with custom lights, seats for watchers, etc. It gets pretty manic trying to eek out more space!

  • Consider getting some light poles to avoid drilling: https://www.amazon.com/Bosch-BP350-Telescoping-4-Inch-20-Inch/dp/B001U89QH4/ref=sr_1_1?s=hi&ie=UTF8&qid=1491516981&sr=1-1&keywords=telescoping+floor+to+ceiling+pole
    If you must drill, the holes should be smaller than the screws, almost half the size, so that the screws hold. But if going into drywall, I would not pre-drill.

    Good luck, you are going to have a blast. And worst case scenario I am sure you could trade some VR time with a friend with mounting experience!