Reddit reviews Crazepony FPV AIO Camera 700TVL CMOS Micro Cam 5.8G 48CH 25mW Transmitter Switchable Raceband 10dBi 2.9-5.5V NTSC/PAL Switchable for FPV Drone like Blade Inductrix etc
We found 4 Reddit comments about Crazepony FPV AIO Camera 700TVL CMOS Micro Cam 5.8G 48CH 25mW Transmitter Switchable Raceband 10dBi 2.9-5.5V NTSC/PAL Switchable for FPV Drone like Blade Inductrix etc. Here are the top ones, ranked by their Reddit score.
Mini Drone AIO FPV Camera: This 5.8g 25mw VTX + antenna + FPV camera AIO Mini image emission module is specially designed for indoor FPV mini drone quadcopterEasy to install. plug and play, ready to flySuper mini size and weight: 5.8G 25mW transmitter on the premise of ensuring power and dissipating heat to optimized super mini shape and ultra-light weight,especially for the current small multi-rotor and ultra-light aircraftHigh performance: The new filter improves the turbulence purity at launch, effectively suppresss higher than 5.8G harmonic interference, reduces the emission of harmful on-demand, and its principle is a vaulted low-pass filter that allows less than 5.8G Of the rush through the smooth, but for higher than the frequency of aluminum bumps to hinder the attenuationWhat You Get: 1 * 5.8G 48CH FPV Camera,1 * adapter Cable,1 * Copper Tube Gain Antenna , and 30 days money back or 12-Month Warranty and 24 hours friendly customer service!
Special thank you to the crew at Tiny Whoop who consistently provide excellent customer and community support even though, someone at fulfillment may be a little colorblind hehehe. Without you guys and /u/JessePFPV this sub probably wouldn't exist!
 
24K Magic
Frame - Cockroach
Canopy - Tiny Whoop Razor skin 1of1 by Ben@TW!
Flight Controller - FuriousFPV AcroWhoop v2 FrSky
Motors - NewBeeDrone BDR Gold Edition 19,700 KV
Props - Rakon Heli Tri Blade
Power - Power Whoop 2.0 JST-PH
VTx- Crazepony 700TVL AIO Camera Detachable
Support Mods - Clear rubberbands to hide motor wires, 3M VHB tape for VTx mounting, dab of hot glue for Camera mounting
 
Dry weight = 19 grams flat
 
4+ minutes of flight time with Crazepony 230mah LiHV batteries and Crazepony 260mah/short LiHV
 
P.S. My kids thank you for all the candy!
 
Okay, I will do so when I get home.
Crazepony just started selling the Tiny6 canopies on Amazon as a set of two for 8 dollars. I used buy the compete frame kits, I have quite the collection of tiny 6/7 frames hahahahaha.
Depending on your soldering skills, you can split the AIO VTX. I did that after ripping the antenna from a crazy crash and for practice. If you do decide to get another VTX, any split one works great. I like using this one. If you have extra hardware I usually cut a slit into one and use as a grommet for the antenna on the Tiny6/7 frame. u/kungfuremi might have photos.
true i'm running the Gemfan 2035 Props 4 Blades getting ALL-UP 88g with 450mha 2S, D1104 7500KV about to move to the DYS BE1102 10000KV for a bit more thrust ratio, worth checking out.
I wold look over this site for build help, has all was be helpful for finding proper combinations.
https://www.ecalc.ch/xcoptercalc.php?ecalc&lang=en
.
as for measurements the standoff length in the camera pod =~ 17mm to 17.5mm.
They will hold the camera, not relay pinch just holds nicely.
meant to hold something like this.
https://www.amazon.com/Wolfwhoop-600TVL-Transmitter-Antenna-Quadcopter/dp/B06XJMQQ6Y
I wanted to go with an osd so i opted for https://www.amazon.com/gp/product/B072L21RPL
still works well just need a bit of hot glue to keep it form rotating on me.
Photo of setup
Everything else is still stock for now, just added this Micro FPV cam: https://www.amazon.com/dp/B072L21RPL/ref=cm_sw_r_cp_dp_T2_ie6FzbGYDP6W2
I want to upgrade the motors but having trouble finding faster motors for the Syma X11. When I did this to my Hubsan H107 I was able to find motors at Micro Motor Warehouse but I didn't see any for the Syma. Think I might be able to just use any 6mm motors, I would just have to move the gears on to them.