Reddit Reddit reviews Danco 3/4 in. OD x 9/16 in. ID, Rubber, #11 O-Ring, 10 per Card, 96728

We found 3 Reddit comments about Danco 3/4 in. OD x 9/16 in. ID, Rubber, #11 O-Ring, 10 per Card, 96728. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Rough Plumbing
Faucet Parts
Faucet O-Rings
Danco 3/4 in. OD x 9/16 in. ID, Rubber, #11 O-Ring, 10 per Card, 96728
O-Ring Dimensions: 3/4 in. OD x 9/16 in. ID x 3/32 in. wall thicknessDanco O-ring #11: Compatible with Barnes, Central, Crane, Cuthbert, Dick Brothers, Dishmaster, Grand Haven, Jameco, Kohler, Milwaukee, Mueller, Mullins, Price Pfister, Schaible, Speakman, Stanadyne, Sterling, Teck, and Youngstown faucetsThese tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needsO-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C)Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issuesIncludes 10 O-Rings per bag for faucet repair
Check price on Amazon

3 Reddit comments about Danco 3/4 in. OD x 9/16 in. ID, Rubber, #11 O-Ring, 10 per Card, 96728:

u/TheDubbiestDubberz · 6 pointsr/vaporents

The glass ones do get kinda loose. I bought the wooden stems. You can also get an o-ring that will hold the loose ones tighter. This is how I fixed my Arizer Solo stems from being too loose for $10

First off, here are the O-Rings that I bought. $10 including shipping.

$3 from Home Depot http://www.homedepot.com/p/DANCO-10-O-Rings-10-Pack-96727/100232944#.UhusnBs3vuR

UPDATE: /u/Ericdoesntknow & /u/CrispyChipz have informed me that these O-Rings are for sale at Home Depot, and on top of that they're cheaper! If anyone has a link to them please send me the link, if I can remember to run to Home Depot I'll grab the UPC # and post that with a link .


Here are the pictures

  1. Uncrew the top cover

  2. Put your stem threw the cap and put the O-Ring on the opposite side (See picture #2)

  3. Push the stem into the heating element (?) so the O-Ring will stay in place while you screw the top back on (See picture #3)

  4. Enjoy your solo! As you can see in picture 4, you can barely even see the O-Ring inside!

    Let me know if you have any questions.

    http://www.reddit.com/r/vaporents/comments/1eyvo0/this_is_how_i_fixed_my_arizer_solo_stems_from/
u/Erdmann701 · 4 pointsr/arizer

Heres some from planet vape.

Here is some from Amazon if you would rather go that way.

or here is some from home depot (which is carried at most stores)

u/captintucker · 1 pointr/vaporents

[Here] (http://www.amazon.com/gp/product/B001HOEU5Y/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1)

It looks like its not available anymore, but you just need to search yourself and find this exact same O-ring.