Reddit reviews Ecolink Zwave Plus Wireless Audio Detector Wireless Audio Detector for existing Smoke/CO sensors, White (FF-ZWAVE5-ECO)

We found 4 Reddit comments about Ecolink Zwave Plus Wireless Audio Detector Wireless Audio Detector for existing Smoke/CO sensors, White (FF-ZWAVE5-ECO). Here are the top ones, ranked by their Reddit score.

AUDIO DETECTOR: Listens to existing smoke or CO detectors in the home and sends signal to your Z-Wave networkNO FALSE ALARMS: No false alarms with patented detection Algorithms and professional security Grade Accuracy and performance1 SENSOR FOR WHOLE HOME COVERAGE: In most homes, with hardwired interconnected smoke detectors, only one sensor need for whole home coverage5 YEARS BATTERY LIFE: Five year battery life on one CR123A lithium batteryZ-WAVE: Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.Operating frequency: 908.42 MHz

Check price on Amazon

4 Reddit comments about Ecolink Zwave Plus Wireless Audio Detector Wireless Audio Detector for existing Smoke/CO sensors, White (FF-ZWAVE5-ECO):

u/jam905 · 4 pointsr/winkhub

There is a way around this - it does cost ~$35-40, but is cheaper than getting all new Hubitat-compatible smoke/CO alarms.

Get an Ecolink Firefighter z-wave Smoke/CO audio detector. This device is installed right next to any of your Kidde alarms, and it pairs to Hubitat (or any z-wave hub) as a z-wave smoke/CO alarm.

It can interpret a smoke or CO alarm sound and send a trigger to the z-wave hub, which can perform actions based on that trigger. I have this working with Hubitat. Saved me the cost of buying all new z-wave smoke/CO alarms.

u/Ghiizhar · 3 pointsr/homeautomation

Depending upon proximity, and a dozen other factors, something like this might work: Wireless Audio Detector

I have one for my HomeSeer system, and it seems to be effective in detecting the sound of fire alarms. My house has several wired alarms that have no automation capabilities. Using this enables me to receive alerts when away from home.

You would need to have a system compatible with Z-Wave devices to use (HomeSeer, SmartThings, Vera, etc)

You would need permission of the neighbors to put one in their home, but it would certainly be to their advantage to allow you to do so. Also, it would need to be within Z-Wave range (330 ft, 100 meters)

u/chriswood1001 · 3 pointsr/homeautomation

I did quite a bit of research looking for the same thing. In the end I decided it was important to keep this safety system separate, using reliable names such as First Alert -- you can interconnect them via. existing home wiring or wireless ... just buy the same brand. I bought these: https://www.amazon.com/dp/B000EVO9D4?ref=ppx_pop_mob_ap_share

But I want the benefits of notifications when smoke alarm trigger (lights turn on, text messages, etc) so I installed this zwave device beside one of them that listens for the sound of an alarm. https://www.amazon.com/dp/B071Z8NM8N?ref=ppx_pop_mob_ap_share

So far, no false alarms, but testing any one of the smoke detectors will reliably trigger this zwave device. Plus, it costs far less than Nest Protect or even Roost, and doesn't rely on a third party cloud.

u/bla8291 · 2 pointsr/homeautomation

Here is the one I got https://www.amazon.com/gp/aw/d/B071Z8NM8N

I recently replaced my smoke detector and I wanted a hardwired Z-Wave one, but apparently that doesn't exist. So I got a dumb one with this detector-detector.