Reddit reviews GE, Black, Replacement Lamp Cord, 8 Ft Long, Polarized 2 Prong Plug, DIY, 54435
We found 3 Reddit comments about GE, Black, Replacement Lamp Cord, 8 Ft Long, Polarized 2 Prong Plug, DIY, 54435. Here are the top ones, ranked by their Reddit score.
Repair or Replace – A worn out or broken cord on a favorite lamp can be fixed with the GE Replacement Lamp CordDo-It-Yourself – Complete a DIY lamp project with the black cord that you can use to light up your lampLong Power Cord – This lamp cord is black and 8 feet long to reach any outlet in your home or officeEasy to Install – Instructions are included with the replacement lamp cord, so you can install the new cord yourselfPower – Do not exceed the electrical rating of 125VAC, 10A, and 1250W, and the cord should not be used with bulbs exceeding 300W
That looks like a lamp. Just purchase a lamp cord replacement like that one and replace the whole thing. Super easy.
https://www.amazon.com/daylight-Bi-pin-halogen-replacement-equivalent-5packs/dp/B077Q4WCWT/ref=asc_df_B077Q4WCWT/?tag=hyprod-20&linkCode=df0&hvadid=241869999306&hvpos=1o2&hvnetw=g&hvrand=11880619207738113069&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9002051&hvtargid=pla-411526575340&psc=1
​
https://www.amazon.com/Satco-Threaded-G9-Halogen-Socket/dp/B004JQWXLA/ref=sr_1_3_sspa?s=hi&ie=UTF8&qid=1543245710&sr=1-3-spons&keywords=g9+socket&psc=1
​
https://www.amazon.com/GE-Molded-8-Foot-Brown-54435/dp/B000UTE278/ref=sr_1_4?s=hi&ie=UTF8&qid=1543245971&sr=1-4&keywords=lamp+cord
I didn't check the voltage/amps rating on the socket but just verify that it accommodates 120v, amps will be under a half, I'd imagine. That little light should be pretty bright but if you shop around a little you'll see there are thousands of these DIY bulbs and sockets on Amazon and ebay.
does the record player actually care of the AC is the correct polarity?
you can buy a replacement polarized appliance cord and most box stores, or amazon, such as :
https://www.amazon.com/GE-54435-Replacement-Polarized-Prong/dp/B000UTE278/
you'll need to open the record player and hope that the circuit board (if it has one) has tagged which connection point is Load and which is Neutral.
the ribbed or striped conductor on the cord is for the neutral, also, that's the side with the larger prong.
you'll desolder the existing cord, and solder on the new one.