Reddit reviews Hosa ACD-477 Universal Power Adaptor with DC Output up to 12V
We found 8 Reddit comments about Hosa ACD-477 Universal Power Adaptor with DC Output up to 12V. Here are the top ones, ranked by their Reddit score.
Input: AC 115v 60Hz,Regulated Output: DC 3-4.5-6-7.5-9-12V, 1200mA maxHigh Efficiency: More than 80%Six Adaptor Plugs: For use with most small home electronic devicesShort Circuit Protection (SCP): Self-protection against short circuit. Please refer Instructional Video and the User Manual attached below for instructions and troubleshooting steps.
If you have multimeter you could measure what it draws for current, it might be under the threshold but I doubt it. It will most likely run off 5v no problem so you could just get any old cheap 5v cell phone charger and solder the connections to the battery case terminals or get something like this, I just picked up a couple of these (not this exact one) at a Radio Shack clearance for about $1 a piece.
One of the included heads should work: http://www.amazon.com/Hosa-ACD477-100-240V-Voltage-Adaptor/dp/B000Z31G3M/ref=acc_glance_hi_ai_ps_t_2
you could also buy of of those universal adapters which have multiple plugs and adjustable voltage.
nb: i have never used this particular one. it is just an example i found using google.
Holy cow man, thank you! You've been of so much help! So would something like this do the trick? I just searched Universal Power Supply on Amazon. http://www.amazon.com/Hosa-Cable-ACD477-Universal-Supply/dp/B000Z31G3M/ref=sr_1_2?ie=UTF8&qid=1369441643&sr=8-2&keywords=universal+power+supply
Yes, I thought it might be complicated. Do you suppose it was custom-made, or is that just how they rolled in the '90s? You've spent a lot of time on this already, so I'm thinking it might be easier to go with the universal power supply option. Does this one look like a good bet to you?
OK, then a good solution is to go ahead and wire it up using an adjustable power supply as this redditor suggests.
All of those pieces are needed for reliability and safety. The solution I just linked above includes those pieces in the plug.
Probably, but the trouble with so-called "barrel" connectors is they come in at least 3 or 4 sizes. It's hard to tell from a picture whether a particular power adapter will fit your device.
EDIT: Though, you could buy a universal adapter and set the switch to 12V.
Shouldve got a mac.
Not to be preachy or anything, but seriously. I have a 2008 macbook that runs all djing software and hardware i have ever tried to use on it, and thats after about 200 nights in a club too. You can get an old used macbook pro for about 400-500$ and then put a $100 SSD in it and have a REALLY sweet computer for not a lot of cash, and the metal ones like a pro last forever.
I know i sound preachy, im sorry, its just macs would solve damn near any problem a modern dj would have.
BUT! to answer your question: heres this one from NI for http://www.native-instruments.com/en/products/traktor/dj-accessories/bags-cases-and-control-media/overview/pricing-power-supply/
It is a 9v 1200 mA. Those are standardish.
http://www.amazon.com/Hosa-Cable-ACD477-Universal-Supply/dp/B000Z31G3M/ref=sr_1_1?ie=UTF8&qid=1406735108&sr=8-1&keywords=9v+1200ma+power+supply