Reddit reviews IBERLS 5V 3A (Compatible with 2A) Universal Power Supply Cord Plug Charger Adapter for LED Pixel Light, HUB, DJ Controller, Nextbook, Android Tablets, Bluetooth Speaker, More 5V Device
We found 10 Reddit comments about IBERLS 5V 3A (Compatible with 2A) Universal Power Supply Cord Plug Charger Adapter for LED Pixel Light, HUB, DJ Controller, Nextbook, Android Tablets, Bluetooth Speaker, More 5V Device. Here are the top ones, ranked by their Reddit score.
【Extensive Compatibility】Input: 100-240V AC, 50-60Hz, Wide voltage design, Almost all countries contain civil voltage range, This product is widely used, application products such as: LED Pixel Light, HUB, Graco Swing, Kindle Fire Tablet, IP Security Camera, Baby Monitor, Home Phone System, VoIP Telephone Routers, Serato DJ Controller, Nextbook, Tablet and so on.【Intelligently Identify】Output: 5V Max 3A/3000mA, it means that it can supply with all amperage which smaller than 3A. ---such as 2.5A, 2A, 1.5A, 1A, 600mA, 750mA, 800mA, 900mA all is available, for example If your device drawing the current only needs 2A then only 2A will be supplied. However, if you needed more than 3A then you will get 3A also.【Security】Certified by FCC CE ROHS, We focus on producing high quality power adapters, No noise, low temperature operation, no spontaneous combustion, no explosion, provide stable output, And to provide you with 1 year after-sales warranty service.【Exquisite Shell】Size: 2.55*1.57*1.06 in, The actual goods are more exquisite than the picture, Wire length: 1.5m approximately 5 Ft, Wires longer than similar products.【More Selective】Comes with connector: 5.5*2.1mm Polarity: positive (+) center, In order to meet your more requirements,We will gift you $ 5 worth of 4 connectors to you, Gift connector: Micro-USB, 4.0*1.7mm, 3.5*1.35mm, 5.5*2.5mm, ⚠️Due to different production batches, gift connectorr may be slightly different from the above connectorr, Specifications are subject to the phisycal product, If you need 12V power supply please search in the search box: B073F51QPY.
Baby breakout board uses a 5.5mm OD and 2.1mm ID plug.
This one from Amazon works:
https://smile.amazon.com/gp/product/B0745BZV6T/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Currently using:
https://www.amazon.com/gp/product/B0745BZV6T
and I have one of these wired to the breakout board:
https://www.amazon.com/gp/product/B079RCNNCK
​
[Breakout Board]
Was not looking to use a big atx pc power supply with the molex pins so I searched Amazon and found this $5 adapter:
https://www.amazon.com/gp/product/B07FK5XDY6/
Pairing with this power adapter:
https://www.amazon.com/gp/product/B0745BZV6T/
The barrel end of the molex adapter accepts a 5.5x2.1mm pin so any adapter with this size end that meets the 5V 3A Atomic Pi requirements should work.. I will update this post if have any issues using the above 2 items to power the board.
No shit. I just received the barebones board today and must have opened about 30 different browser tabs trying to figure out how to power the damn thing *tonight* with what I have on hand (not much, basically a PC power supply with molex connector.) Can't do it.
​
Didn't want to leave a bad review for the seller, but for a while there I was SERIOUSLY thinking about just returning it cuz I could feel my blood pressure literally rising and stress getting to be a little too much.
​
Ended up ordering a $10 power supply, $7.50 10-pack of ends for the adapter, and a $6 pack of dupont breadboard wires. So all in all ~$23.50 extra expense JUST TO GET POWER (and JACKLEG power, at that!) TO THE BOARD. Because the easier way, the mini breakout board, is out of stock on Amazon until June 6th or something. We'll see if it's worth it. If not, next step is prolly a Jetson Nano.
​
GenBasic 80 Piece Male to Male 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
Sold by: LoveRPi - $5.99
Chanzon (10 x Female) 12V DC Power Connector 5.5mm x 2.1mm 24V Power Jack Socket for Led Strip CCTV Security Camera Cable Wire Ends 10Pcs Plug Barrel Adapter
Sold by: Chanzon - $7.49
IBERLS AC to DC Regulated Transformer Wall Power Adapter Supply Cord Plug Charger 5V 3A(Compatible with 5V2A) for LED Pixel Light, USB-HUB, Kindle Fire Tablet, DJ Controller, Nextbook
Sold by: IBERLS - $9.99
People are buying this.
https://www.amazon.com/gp/product/B0745BZV6T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1&pldnSite=1
Would it be possible to cut off the molex end and splice/attach to something of this nature? Or is that less safe or inferior to usb power?
https://www.amazon.com/Berls-Regulated-Transformer-Controller-Connectors/dp/B0745BZV6T/ref=sr_1_1_sspa?s=electronics&ie=UTF8&qid=1521664940&sr=1-1-spons&keywords=5v+power+supply&psc=1
I recently purchased an Atomic Pi with the original breakout board which has a Molex connector. I bought a power charger and an adapter which I thought would work with the board but plugging the 2 of them in does not seem to power on the board. Am I missing something here?
I have the same buttons. Was very disappointed the wires needed to light up the leds were not included. I just ordered this: https://www.amazon.com/gp/aw/d/B0745BZV6T and the yellow and black wiring harness someone above posted. Ill get it tuesday and let you know if it works.
To control more servos, servo driver such as the one from Adafruit is the best solution. Certainly not a motor driver. This also simplifies power supply: it already has screw terminals for a separate power supply, so you wouldn't need to solder your own board (not that it is difficult, of course...).
​
I'd suggest getting a beefier power supply. Every servo which is plugged in draws some power, even when holding still. I'd get at least 3A - it doesn't cost much, and helps avoid problems.
A 5v 1amp phone charger with a barrel connector is probably all it was. Since it's for a couch, distance will drop your output. Something like this will work: https://www.amazon.com/dp/B0745BZV6T/