Reddit reviews Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included

We found 10 Reddit comments about Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included. Here are the top ones, ranked by their Reddit score.

Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included

Voltage Tester provides non-contqact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wiresVolt Pen with high intensity, bright green LED that indicates the tester is operational and aids in illuminating the workplaceWhen voltage is detected, a high intensity, bright red LED illuminates and a warning tone soundsDiscreet digitally controlled ON/OFF power buttonAuto power-off feature conserves and extends battery life

Check price on Amazon

10 Reddit comments about Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included:

u/Burner_Acount · 15 pointsr/news

Yep. And honestly everything else is just about as simple as hooking up the ceiling fan. Two wires and an earth ground. Just for future reference, they sell these relatively cheap non-contact voltage detectors that are really good for people who want to do their own electrical work. These are better than a meter for determining power on/off because they're so simple to use. You just hold it next to the wire and press the button, and it will tell you if there's power or not. The best method is to check it with the break on and confirm power is present, then flip the breaker and confirm it's not. Then check every other wire in the box you're working in, and you'll have some confidence that all circuits involved have been turned off.

I'm an electrical engineer in an industrial environment, and we require all of our electricians to carry and use these, even though they all know how to use meters very well, just because they're so fool proof. There's no chance of picking the wrong setting, or not having a lead connected properly.

u/BrentRS1985 · 6 pointsr/pics

Light fixtures are very easy to replace. There's a risk of electric shock, but that's easy to avoid. First turn on the light, then go and switch breakers off and on until the light turns off, helps to have a 2nd person to yell when it does. Sometimes the breakers are labeled, but that's like winning the lottery. Pick up one of these guys to quickly verify that the wires aren't going to shock you.

u/IcyKettle · 3 pointsr/HomeImprovement

Can't go wrong with a Klein: https://www.amazon.com/Klein-Tools-NCVT-1-Contact-Voltage/dp/B001UAHZAM

It's pretty much the gold standard, at least for homeowners. But every electrician I've ever had over also uses them.

u/1new_username · 3 pointsr/HomeImprovement

u/soldier_of_X · 2 pointsr/electricians

Maybe ask him if he has any of these, they're more specialty tools that not every starter has, but can really come in handy:

lumex (romex) strippers: amazon.ca

tap: kleintools.com

tick tester: amazon.ca

9/16 nut driver (used for installing the ever-popular "dome light"): homedepot.com

plug tester: amazon.ca

u/Goldfinger_Fan · 2 pointsr/BlueCollarWomen

Safety is so important. This will be one of your best friends on the job if you're afraid of getting shocked: Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included https://www.amazon.com/dp/B001UAHZAM/ref=cm_sw_r_cp_apa_i_nzP2Db6S2MTN2

You can always say no if you feel unsafe and if you're unsure of how to do something you can ask questions. Never assume something is dead, always test it with a tic tester before touching it. I've seen seasoned people almost get shocked because they assume something is dead and it isn't. PPE is important and always wear it. Don't worry about looking stupid for being safe, and never let someone pressure you or shame you into doing something unsafe. It's good to have some fear because it helps keep you cautious and keeps you safe!

u/Loan-Pickle · 2 pointsr/mildlyinfuriating

That’s one way.

I have a no contact voltage probe that I use to make sure the power is cut. Like this.

Klein Tools NCVT-1 Non-Contact Voltage Tester with Low Battery Indicator and Auto Shutdown https://www.amazon.com/dp/B001UAHZAM/ref=cm_sw_r_cp_tai_vP8ADbJCDXF7M

They are pretty inexpensive and handy to have.

u/mykol_reddit · 2 pointsr/Whatcouldgowrong

Tell him to stop being cheap and invest the $20 for a wiggy.

https://www.amazon.com/Klein-Tools-NCVT-1-Contact-Voltage/dp/B001UAHZAM/ref=sr_1_1?ie=UTF8&amp;qid=1494858791&amp;sr=8-1&amp;keywords=Klein+50-1000VAC

u/Syde80 · 2 pointsr/homeautomation

Its not that difficult. As long as you have a clear understanding of the dangers, breakers, and know the purpose load/line/neutral/ground wires then you will be able to do this no problem.

Also, get yourself a non-contact voltage tester like this: https://www.amazon.com/Klein-Tools-NCVT-2-Non-Contact-Voltage/dp/B001UAHZAM/ref=sr_1_1?s=hi&amp;ie=UTF8&amp;qid=1484920204&amp;sr=1-1&amp;keywords=electrical%2Bline%2Btester&amp;th=1

u/burntach55 · 1 pointr/HomeImprovement

thanks for the encouragement!

I certainly do have non-contact voltage testers readily available and multimeters as i've been luckily enough to have made mistakes which made sparks but didnt hurt or burn anything down so i've learned my lesson. If i'm not 100%, take 5 seconds to check vs spending 5 hours at the hospital! =)

Non-Contact Voltage tester for those wondering what that is (life saver tool):

https://www.amazon.com/Klein-Tools-NCVT-1-Non-Contact-Indicator/dp/B001UAHZAM/ref=sr_1_6?crid=1792TVYRSE11A&keywords=non+contact+voltage+tester&qid=1572892596&sprefix=non-voltage+con%2Caps%2C147&sr=8-6